Petsafe LITTLE DOG Remote Trainer Setup guide

LITTLE DOG
Remote
Trainer
Operating and
Training Guide
Please read this entire guide before beginning

2 1-800-732-2677
Thank you for choosing PetSafe
®
, the best selling brand of electronic training solutions in
the world. Our mission is to be the most trusted brand in the pet ownership experience.
We want to ensure your pet’s safety by providing you with the tools and techniques to
successfully train your pet. If you have any questions, please contact the Customer Care
Center at 1-800-732-2677 or visit our website at www.petsafe.net.
________________________________________________________________________________________
Table of Contents
Components .............................................................................................................4
Other ItemsYou May Need........................................................................................5
How the System Works ..............................................................................................5
Key Definitions .........................................................................................................6
Operating Guide
Prepare the Remote Transmitter .............................................................................9
Prepare the Receiver Collar..................................................................................13
Fit the Receiver Collar .........................................................................................17
Find the Best Intensity Level forYour Pet .............................................................21

www.petsafe.net 3
Training Guide
General Tips........................................................................................................23
Teaching Basic Obedience....................................................................................27
Eliminating Unwanted Behavior...........................................................................32
Frequently Asked Questions ....................................................................................41
Troubleshooting ......................................................................................................45
To Pair the Remote Transmitter and Receiver Collar.................................................47
Test Light Instructions ............................................................................................48
Terms of Use and Limitation of Liability ..................................................................49
FCC .......................................................................................................................51

4 1-800-732-2677
Components
Test Light
Tool
Remote
Transmitter
Warranty
Card
Warranty
PetSafe
Little Dog
Receiver Collar
Battery
(PetSafe®RFA-188)
Operating and
Training Guide
Lanyard
Charging Adapter

www.petsafe.net 5
Other Items You May Need
• Scissors
• Non-metallic collar and 10-foot leash for training
How the System Works
The PetSafe Remote Trainer has been proven safe, comfortable, and effective for all
pets up to 55 pounds.This system assists you in controlling your pet without a leash in
a range up to 100 yards. At the push of a button, the Remote Transmitter sends a signal,
activating the Receiver Collar. Using the Remote Trainer consistently and correctly, many
misbehaviors that your pet exhibits can be corrected or any basic obedience commands
can be taught.

6 1-800-732-2677
Key Definitions
Remote Transmitter: Transmits the radio signal to the Receiver
Collar. It is waterproof.
Transmitter Indicator Light: Indicates that a button is pressed
and also serves as a low-battery indicator.
Intensity Dial: Provides multiple levels of Stimulation so you can
match the correction to your pet’s temperament.
Upper Button: This button is factory-set to deliver a Negative
Tone only.
Lower Button: This button is factory-set to deliver Continuous
Stimulation set by the Intensity Dial.
Side Button: This button is factory-set to deliver a Positive Tone
only.
Charging Jack: For connecting the charger. Although the Remote
Transmitter is waterproof without the charger cover, keep the cover
in place when not charging to keep debris out of the opening.
1
2
3
4
5
6
7
8
Transmitter
Indicator
Light
Side Button
Upper Button
Transmitter Antenna
Intensity Dial
Lower Button
Charging Jack
(with cover)
Remote Transmitter

www.petsafe.net 7
Continuous Stimulation: You control when and how long Stimulation is
delivered to your dog through the Receiver Collar’s Contact Points.When the
Continuous Stimulation (Lower Button) is pressed for 8 seconds or more, the
Remote Transmitter will “time-out.” The button will need to be released and
pressed again before additional Stimulation can be delivered.
Negative Tone: Use a Negative Tone (Upper Button) with a Stimulation to
stop unwanted behaviors. Timing is critical. The Negative Tone followed by the
Stimulation should occur during or immediately after the unwanted behavior.
Once your dog associates the Negative Tone with the Stimulation, you will only
need to use the Negative Tone.
Positive Tone: Use the Positive Tone (Side Button) as a marker to reinforce
positive behavior. Again, timing is critical. Praise or treat the dog immediately
following the Positive Tone.

8 1-800-732-2677
Receiver Collar: Receives the radio signal from
the Remote Transmitter. It is waterproof.
Contact Points: The contacts through which the
Receiver Collar delivers Stimulation.
Two Color LED: Indicates when the Receiver
Collar has been turned on or off. This light also
serves as a low battery indicator. Please see page 16
for additional LED functions.
On / Off
Contact Points
Two Color LED
Receiver Collar

www.petsafe.net 9
Operating Guide
Prepare the Remote Transmitter
Charge the Remote Transmitter
1. Lift the rubber cover protecting the Remote
Transmitter Charging Jack.
2. Connect the charger connector to the Remote
Transmitter Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 24 hours for the
first charge. Recharges take only 12 hours.
Note:The Transmitter Indicator Light will flash after 12
hours of charging. For the first charge, continue to charge
the Remote Transmitter for an additional 12 hours.
Charger connector placed
in the Remote Transmitter
Charging Jack

10 1-800-732-2677
5. When charging is completed, replace the rubber cover.
Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use.
Transmitter Indicator Light - Function and Response
Remote Transmitter Function Indicator Light Response
Transmitter being charged for up to 12 hours Solid in color
Transmitter being charged for more than 12 hours Flashes once per second
Any button being pressed - good battery Solid in color
Any button being pressed - low battery Flashes once per 1/2 second
Any button pressed for tone or continuous
stimulation
Solid in color

www.petsafe.net 11
Rechargeable Battery
The rechargeable Nickel Metal Hydride (NiMH) battery is not memory sensitive
and does not require depletion before charging.
The battery comes partially charged from the factory, but will require a full
charge (24 hours) before the first use.
Remember - Always keep the battery away from flame.
When storing the unit for long periods, remember to regularly give the battery a
full charge (12 hours).This should be done once every 4 to 6 weeks.
Excessive overcharging can shorten battery life. After initial charge, never leave
the battery plugged in for more than 12 hours.
If your equipment has not been charged for an extended period, you may
experience a decrease in battery life the first few uses. Afterwards, the battery life
will return to previous capacity levels.
•
•
•
•
•
•

12 1-800-732-2677
You should expect hundreds of recharge cycles from your battery. However, all
rechargeable batteries lose capacity over time relative to the number of recharge
cycles they experience. This is normal. If your operating time drops to half of the
original life, contact the Customer Care Center to purchase a new battery.
The battery should last for a period of 3-5 years. When a battery needs
replacement, you can order a new pack by contacting our Customer Care
Center or visit our website at www.petsafe.net. Please do not open the Remote
Transmitter until you have received the replacement.
•
•

www.petsafe.net 13
Prepare the Receiver Collar
Turning the Receiver Collar On and Off
The Receiver Collar is packaged with the battery module installed in the “OFF” position.To
activate the collar, use the test light tool to turn the Battery Module counter-clockwise until the
arrow lines up with the “ON” position. If the Receiver Collar is not going to be used on the dog
immediately leave it in the “OFF” position. The LED Light will flash once every 5 seconds until
the Receiver Collar is turned off. The flashing light indicates the Receiver Collar is ready to receive
a radio signal from the Remote Transmitter.
Once the Receiver Collar has been turned on, press the Upper or Side Button of the Remote
Transmitter. Upon pressing, the Receiver Collar should beep for as long as the Upper or Side
Button is pressed. If it does not, see “To Pair the Remote Transmitter and the Receiver Collar” in
the Troubleshooting section.
Note:To extend the life of the batteries, turn the Receiver Collar off when it is not in use.
Important: If the Receiver Collar is left on continuously, the maximum battery life
(before replacing batteries) will be two weeks.

14 1-800-732-2677
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe® battery
(RFA-188).This unique battery is designed to make battery
replacement easier and increase water protection.
To insert the battery, align the symbols on the battery
(indicator line) and Receiver Collar (triangle). Using the edge
of the Test Light Tool as shown, turn the battery clockwise
until the arrow lines up with the “On” position if you are
putting it on the dog or the “Off” position if it is not being
put on the dog right away (A, B) .
To remove the battery, turn the battery counter-clockwise using the edge of the Test Light
Tool as shown, (C, D).
C
AB
D

www.petsafe.net 15
DO NOT attempt to cut into or pry open the battery. Be sure to discard the used battery
properly.
A replacement PetSafe
®
battery (RFA-188) can be found at many retailers. Contact the
Customer Care Center at 1-800-732-2677 or visit our web site at www.petsafe.net for a
list of common retailers.

16 1-800-732-2677
Two Color LED – Function and Response
Receiver Function LED Response Receiver Beeper
Response
When the Battery is installed and
turned to the “ON” position
Green Light flashes five times Beeps five times
Unit is on Green Light flashes once every five seconds None
Continuous stimulation delivered
to dog
Red light flashes between corrections for
as long as the button is held down on the
transmitter
None
Low Battery Condition Red light flashes three times every five
seconds
None
Good Tone Signal being received Green light flashes Good Tone Beep
Negative Tone Signal being received Red light flashes Negative Tone Beep

www.petsafe.net 17
Fit the Receiver Collar
Important:The proper fit and placement of your Receiver Collar is important
for effective operation.The Contact Points must have direct contact with your
dog’s skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure that the Receiver Collar is turned off.
2. Start with your dog standing comfortably (E).
3. Place the Receiver Collar high on your dog’s neck close to the ears.
Center the Contact Points underneath your dog’s neck, touching
the skin (F).
E
Note: It is sometimes necessary to trim the hair
around the Contact Points to make sure that contact is
consistent.
F

18 1-800-732-2677
4.The PetSafe QuickFit™ Collar is designed so you can quickly
attach and remove the Receiver Collar from your dog while
maintaining the desired fit.
a.With the Snap Buckle fastened (G) , thread the collar through
the Metal Buckle (H).
b. Slide the excess collar through the “C” Loop on top of the
Snap Buckle.This will hold the collar in place.
c. Once the collar fit is determined, simply use the Snap Buckle to
remove and replace the collar.
G
H

www.petsafe.net 19
5.The Receiver Collar should fit snugly, yet loose enough to allow one
finger to fit under the strap (I). Allow your dog to wear the collar
for several minutes, then recheck the fit. Check the fit again as your
dog becomes more comfortable with the Receiver Collar.
6.Trim the collar as follows:
a. Mark the desired length of the collar with a pen. Allow for
growth if your dog is young or grows a thick winter coat.
b. Remove the Receiver Collar from your dog and cut off excess.
I
Important: Do not attach a leash to the collar.This can result in pulling the
Contact Points too tightly against your pet’s neck. Attach a leash to a separate,
non-metallic collar or harness, making sure the extra collar does not put
pressure on the Contact Points.

20 1-800-732-2677
Care and Cleaning
For comfort, safety, and effectiveness of this product, please ensure that you check
the fit of your pet’s collar frequently. This Guide describes proper collar fitting. If
any skin irritation is observed, discontinue the use of the collar for a few days. If
the condition persists beyond 48 hours, see your veterinarian.
To prevent skin irritation from occurring:
• The Receiver Collar should not be worn for more than 8 hours out of every
24-hour period.
•Your pet’s neck and the Contact Points must be washed weekly with a washcloth
and mild hand soap, then rinsed thoroughly.
• Be sure that your pet’s neck is thoroughly dry before placing the Receiver Collar
back on his neck.