Pitney Bowes Datamax w1110 User manual

Right, let’s get your Network
Printer up and running quickly…
Let’s rst get together the things you will need:
• The box containing your Network Printer.
• A MAC on which you have full admin rights to allow downloading
and installing software.
• 1 available USB port on your MAC.
Continue reading below
Stand-Alone Network Printer
Read Now BEFORE you unpack your equipment
MAC Installation Instruction
USB Printer Connection

1. Opening the box and unpacking.
Printer
USB Power Cord Network Cable
(not used for
USB installation)
Here’s a diagram and explanation of the items you should
nd in your box.
If you have any problems during this installation, refer to
‘Troubleshooting’.
2. Connecting the printer.
Connect the power cord and adapter to your printer
(as shown) and switch on.
3. Printer ready.
Wait for approximately 45 seconds until the green
light remains constant and the printer is ready.

4. Aligning the label roll.
Press the button and check that the label feeds out correctly.
Note: If the label does not feed correctly please refer to label
alignment instructions inside the printer top cover.
Tear o the correctly dispensed label.
5. Connecting the printer and
driver download.
Connect your printer to your computer with the USB cable.
7. Manually download the
printer driver.
1. Go to support.pb.com/workstation
2. Select Download Drivers for Workstation w1110 Label
Printer in the Downloads section.
3. Select in the Download your Mac printer driver
section.
4. Double click on the Gutenprint 5.2.12-pre4.dmg le.
5. Press Continue.
6. Press Agree and then Continue.
7. Press Install.
8. The installer will prompt you for your Mac administrative
login. Enter your administrator username and password
and select Install Software.
9. When complete, it will say The installation was
successful. Select Close.
10. Select System Preferences from the Apple menu.
11. Open Printers & Scanners.
12. Select the plus sign + and select “Add Printer or
Scanner...”.
13. The MAC system will auto-detect the USB connection to
the Performance Series printer(s).
14. Click on “Select Software...” and choose the Datamax-
O’Neil driver.
15. Scroll down the list or, alternatively, you can type
“Datamax” and the driver should display. Select
“Datamax-ONeil w1110-CUPS+Gutenprint v5.2.12-
pre4” and click “OK.”
16. Once the driver software is installed, select the “Printer”
tab at the top of the screen, and click on “Print Test
Page” to print a test page.

When printing shipping labels on the w1110 printer:
• In the Safari printer dialog box, you must select the Chose
paper source by PDF page size box before printing.
• In the Adobe PDF printer dialog box, you must select 4x6
in label from the Paper Size menu.
Troubleshooting
Printing problems on Datamax w1110
If you experience problems with a Datamax w1110 printer, such
as poor print quality, misaligned labels, jams, or ashing LED
indicator lights, ensure that the roll is properly installed in the
printer.
If the labels are blank, the roll may be loaded upside down.
The two green brackets in the Datamax printer are spring loaded
to keep the roll in place. Slide the green brackets apart to place
the roll between them with the adhesive labels on the top and the
disposable material on the bottom.
*AW32663reva*
3001 Summer St.
Stamford, CT 06926
www.pitneybowes.com
AW32663 Rev. A 05/18
©2018 Pitney Bowes Inc.
All Rights Reserved
If you’re still having trouble, then visit
support.pb.com/workstation
and select Errors & Troubleshooting.