Pitney Bowes Datamax w1110 User manual

Right, let’s get your Network
Printer up and running quickly…
Let’s rst get together the things you will need:
• The box containing your Network Printer.
• A Mac on which you have full admin rights to allow downloading
and installing software.
Continue reading below
Stand-Alone Network Printer
Read Now BEFORE you unpack your equipment
MAC Installation Instruction
Network Printer Connection

1. Opening the box and unpacking.
Printer
USB
(not used
for network
installation)
Power CordNetwork Cable
Here’s a diagram and explanation of the items you should
nd in your box.
If you have any problems during this installation, refer to
‘Troubleshooting’.
2. Connecting the printer.
Connect your Network cable to your printer and Network
socket.
Connect the power cord and adapter to your printer
(as shown) and switch on.
Network Cable
Power Cable

3. Printer ready.
4. Aligning the label roll.
Wait for approximately 45 seconds until the green
light remains constant and the printer is ready.
Press the button and check that the label feeds out correctly.
Note: If the label does not feed correctly please refer to label
alignment instructions inside the printer top cover.
Tear o the correctly dispensed label.
Print the System Report to obtain the IP address assigned to
the label printer.
1. To print the system report simultaneously press the
button on the front of the label printer and the recessed
button on the back of the printer with a suitable object
such as a pencil or similar.
2. Keep the printed report that will be needed later in the
installation process.
5. Printing a system report.
System Report
...
Ethernet IP
Ethernet MAC
Ethernet DHCP
Hostname

6. Downloading the printer driver.
1. Go to support.pb.com/workstation
2. Select Download Drivers for Workstation w1110 Label
Printer in the Downloads section.
3. Select in the Download your Mac printer driver
section.
4. Double click on the Gutenprint 5.2.12-pre4.dmg le.
5. Open gutenprint-5.2.12.pkg.
6. Select Continue.
7. Select Install.
8. The installer will prompt you for your Mac administrative
login. Enter your administrator username and password
and select Install Software.
9. When complete, it will say The installation was
successful. Select Close.
10. Select System Preferences from the Apple menu.
11. Open Printers & Scanners.
12. Select the plus sign + to add a printer.
13. At the top of the window, select IP.
14. In the Address eld, enter the IP address of the w1110
printer you identied earlier.
15. From the Protocol menu, select HP Jetdirect – Socket.
16. Leave the Queue eld blank.
17. (Optional) To rename the printer, enter the desired name in
the Name eld.
18. From the Use menu, choose Select Software.
19. In the search eld, enter w1110.
20. Select Datamax-ONeil w1110 - CUPS+Gutenprint
v5.2.12 and select OK.
21. Select Add.
When printing shipping labels on the w1110 printer:
• In the Safari printer dialog box, you must select the Chose
paper source by PDF page size box before printing.
• In the Adobe PDF printer dialog box, you must select 4x6
in label from the Paper Size menu.
*AW32664reva*
3001 Summer St.
Stamford, CT 06926
www.pitneybowes.com
AW32664 Rev. A 05/18
©2018 Pitney Bowes Inc.
All Rights Reserved
If you’re still having trouble, then visit
support.pb.com/workstation
and select Errors & Troubleshooting.