PLANET ECLIPSE 180R.68CAL Instruction manual

WORKSHOP MANUAL
PLANET ECLIPSE: 180R .68CAL
.68CAL

PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
WARNING
!
THE PLANET ECLIPSE 180R IS NOT A TOY. PAINTBALL SAFETY RULES MUST BE FOLLOWED AT
ALL TIMES.
!
Careless or improper use of the 180R, including failure to follow instructions and warnings within
this Workshop Manual could cause serious injury or death.
!
Do not remove or deface any warnings attached to the 180R.
!
Paintballindustrystandardeye/face/earandheadprotectiondesignedspecicallytostop
paintballs and meeting ASTM standard F1776 (USA) or CE standard (Europe) must be worn by the
user and any person within range. Proper protection must be worn during assembly, cleaning and
maintenance.
!
Hearing protection should be worn.
!
Never shoot at a person who is not wearing proper protection.
!
Never look directly into the barrel of the marker. Accidental discharge into the eyes may cause
permanent injury or death. Never look into the barrel or breech area of the 180R whilst the marker
isswitchedonandabletore.
!
The electronic ON/OFF button is the marker’s disabling device. Always switch OFF when not in use.
!
Treateverymarkerasifitisloadedandreadytore.
!
Alwaystabarrel blocking device to the 180R when not in use.
!
Always remove paintballs from the 180R when not in use.
!
Donoteldstriporremoveanypartswhilethemarkerispressurised.
!
Do not pressurise the 180R without all the components of the marker correctly installed, as
high-pressure gas may be emitted.
!
Donotrethe180Rwithouttheboltcorrectlyinstalled.
!
Neverputyourngeroranyforeignobjectsintothepaintballfeedtubeofthe180R.
!
Never allow pressurised gas to come into contact with any part of your body.
!
Alwaysremovetherststageregulator and relieve all residual gas pressure from the 180R before
disassembly.
!
Alwaysremovetherststageregulator and relieve all residual gas pressure from the 180R for
transport and storage.
!
Alwaysfollowtheguidelinesgivenwithyourrststageregulator for safe transportation and
storage.
!
Always store the 180R in a secure place.
!
Observe all local and national laws, regulations and guidelines.
!
Persons under 18 years of age must have adult supervision when using or handling the 180R.
!
Onlyuseprofessionalpaintballeldswherecodesofsafetyarestrictlyenforced.
!
Only use compressed air/nitrogen. Do not use any other compressed gas or pressurised liquid
including CO2.
!
Always follow instructions, warningsandguidelinesgivenwithanyrststageregulator you use with
the 180R.
!
Use 0.68 inch calibre paintballs only.
!
Always measure your marker’s velocity before playing paintball, using a suitable chronograph.
!
Never shoot at velocities in excess of 300 feet (91.44 metres) per second, or at velocities greater
than local or national laws allow.
!
Anyinstallations,modicationsorrepairsshouldbecarriedoutbyaqualiedindividualata
licensed and insured paintball facility.
This Users Manual is in English.
It contains important safety guidelines and instructions. Should you be unsure at any stage, or unable to understand the contents
of this manual you must seek expert advice.
Le mode d’emploi est en Anglais.
Il contient des instructions et mesures de sécurité importantes. En cas de doute, ou s’il vous est impossible de comprendre le contenu du monde d’emploi, demandez conseil à un expert.
Este manual de usuarios (operarios)
Usarios está en Inglés.Contiene importantes normas de seguridad e instrucciones. Si no está seguro de algùn punto o no entiende los contenidos de este manual debe consultar con un experto.
Diese Bedienungs - und Benutzeranleitung ist in Englisch.
Sie enthålt wichtige Sicherheitsrichtlinen und - bestimmungen. Solten Sie sich in irgendeiner Weise unsicher sein, oder den Inhalte dies Heftes nicht verstehen, lassen Sie sich bitte von einen
Experten beraten.
READ CAREFULLY BEFORE USE

PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
01 180R BOLT SYSTEM
02 CAN ASSEMBLY
03 BOLT ASSEMBLY
04 BOLT GUIDE ASSEMBLY
05 SPOOL ASSEMBLY
06 SWITCH ASSEMBLY
07 SWITCH BODY ASSEMBLY
08 REGULATOR ASSEMBLY
09 SOLENOID ASSEMBLY
10 FRAME SUB-ASSEMBLY
11 TRIGGER ASSEMBLY
12 BATTERY HOUSING ASSEMBLY
13 POPS ASSEMBLY
14 FEEDNECK ASSEMBLY
15 BREECH SENSOR (BS) ASSEMBLY
16 SERVICE INDICATOR - LUBRICATION REQUIRED
17 SERVICE INDICATOR - SERVICE REQUIRED
19 LEAKS DOWN THE BARREL
20 FIRST SHOT DROP OFF (FSDO)
21 ‘PUFFS’ WHEN TRIGGER IS PULLED
22 DOES NOT FULLY CYCLE
23 SOLENOID LEAK
24 CONSTANT HIGH VELOCITY
25 INLINE REGULATOR / POPS LEAK
26 BREAKING PAINT IN THE BREECH
27 INCONSISTANT SHOT TO SHOT FPS
28 INEFFICIENT / LOW SHOT COUNT
CONTENTS

1
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
180R BOLT SYSTEM
NOTE: CS3 AND 180R SPOOL ASSEMBLIES AND JOINER PARTS ARE NOT INTERCHANGABLE
CAN
SPOOL SPRING
SWITCH
PLUNGER
010 NBR70 O-RING
M2.5 SPRING WASHER
SWITCH BODY CAP
BOLT PIN
4X1 NBR 70 O-RING
SPRING GUIDE
SWITCH BODY
5MM BALL BEARING
SPOOL
JOINER
BOLT
BOLT GUIDE
BOLT BONNET
M2.5 X 8 CAP HEAD SOCKET SCREW

2
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
CAN ASSEMBLY
020 NBR70 O-RING
CAN
017 NBR70 O-RING

3
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
BOLT ASSEMBLY
BOLT
BOLT TIP
013 NBR70 O-RING
14X2 NBR70 O-RING
015 NBR90 O-RING

4
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
BOLT GUIDE ASSEMBLY
20 X 1.2 NBR70 O-RING
017 NBR70 O-RING
013 NBR70 O-RING
6 X 1.5 NBR70 O-RING

5
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
SPOOL ASSEMBLY
NOTE: CS3 AND 180R SPOOL ASSEMBLIES ARE NOT INTERCHANGABLE
011 NBR70 O-RING
SPOOL
SPOOL INSERT
012 NBR70 O-RING

6
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
SWITCH ASSEMBLY
016 NBR70 O-RING
SWITCH

7
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
SWITCH BODY ASSEMBLY
021 NBR70 O-RING
20X1.2 NBR70 O-RING
4X1 NBR70 O-RING
SWITCH BODY

8
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
REGULATOR ASSEMBLY
REGULATOR BODY
008 NBR70 O-RING
REGULATOR SEAL
015 NBR70 O-RING
PURGE POPPET
ADJUSTER CAP
PURGE POPPET SPRING
011 NBR70 O-RING
10-32 UNF X 1”
CAP HEAD SOCKET
SCREW
POPS ASSEMBLY
014 NBR70 O-RING
REGULATOR PISTON
REGULATOR SPRING

9
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
SOLENOID ASSEMBLY
3-WAY SPOOL
FRAME GASKET
SOLENOID BODY PIN
3-WAY BODY
BODY GASKET
#6 SPOOL SEAL
6X1 NBR70 O-RING
SOLENOID PLATE
M1.6 X 5 COUNTER SUNK SCREW
SOLENOID PILOT
M2 X 16 CROSS PAN HEAD SCREW
SOLENOID
PLATE GASKET

10
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
FRAME SUB-ASSEMBLY
M2.5 X 5 CAP HEAD SOCKET SCREW
TRIGGER SPRING
TRIGGER ASSEMBLY
6-32UNC X 0.125 SOCKET SET
SCREW - CUP POINT
THREADED TRIGGER PIN
BS BOARD
M2.5 X 5 CAP HEAD SOCKET SCREW
BS WIRE

11
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
TRIGGER ASSEMBLY
6-32UNC X 0.1875 SOCKET SET
SCREW - CUP POINT
M2.5 X 5 CAP HEAD
SOCKET SCREW
TRIGGER SHOE
TRIGGER
6-32UNC X 0.1875 SOCKET
SET SCREW - CUP POINT
6-32UNC X 0.1875 SOCKET
SET SCREW - CUP POINT

12
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
BATTERY HOUSING ASSEMBLY
6-32 UNC X 0.25/0.3125 SOCKET
COUNTER SUNK SCREW
6-32 UNC X 0.25/0.3125
SOCKET COUNTER
SUNK SCREW
9V (PP3, 6LR61 / 6LP3146, 11604A) BATTERY
BATTERY HOUSING
BATTERY CONNECTOR

13
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
POPS ASSEMBLY
POPS PIN
007 NBR70 O-RING
004 NBR70 O-RING
POPS INSERT
004 NBR70 O-RING
POPS CROSS PIN
005 NBR90 O-RING
POPS BONNET
POPS LATCH
SPRING
POPS LATCH
BUTTON
POPS BODY

14
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
FEEDNECK ASSEMBLY
004 NBR70 O-RING
10-32 UNF X 0.5” CAP HEAD SOCKET SCREW
FEED INSERT
FEED SCREW
LOCATING
FEED LEVER
CLAMPING FEED WHEEL
LOCATING FEED TUBE
FEED SWIVEL
006 NBR70 O-RING

15
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
BREECH SENSOR (BS) ASSEMBLY
BS COVER
LIGHT PIPE ASSEMBLY
BS COVER CLIP
M1.6 X 5 COUNTER
SUNK SCREW
RUBBER DETENT
BREECH SENSOR (BS)

16
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
(C) = CLEAN & INSPECT (R) = LUBRICATE
SERVICE INDICATOR - LUBRICATION REQUIRED
CLEAN, INSPECT & LUBRICATE / CHANGE HIGHLIGHTED SEALS AND FACES
L
I
CAN (INSIDE FACE)
020 NBR70 O-RING
017 NBR70 O-RING
14X2 NBR70 O-RING
BOLT (OUTSIDE FACE)
6X1.5 NBR70 O-RING
017 NBR70 O-RING
BOLT (INSIDE FACE)
L
L
L
L
L
L
L
L
L
I
I
I
I
I
I
I
I
I
015 NBR90 O-RING
013 NBR70 O-RING
013 NBR70 O-RING
013 NBR70 O-RING
I
I
I

17
PLANET ECLIPSE OFFICIAL WORKSHOP MANUAL 180R © 2023 PLANET ECLIPSE LTD
SERVICE INDICATOR - *SERVICE REQUIRED PART 1/2
CLEAN AND LUBRICATE / CHANGE HIGHLIGHTED SEALS AND FACES
(C) = CLEAN & INSPECT (R) = LUBRICATE
L
I
021 NBR70 O-RING
016 NBR70 O-RING
012 NBR70 O-RING
SPOOL (OUTSIDE FACE)
011 NBR70 O-RING
SWTCH BODY (INSIDE FACE)
SWITCH (INSIDE FACE)
L
L
L
L
I
I
I
I
I
I
I
*In addition to the ‘lubrication’ guide on previous page