Planet Networking & Communication VIP-193 User manual

802.11b/g Functional Wi-Fi Phone
VIP-193
User’s manual
Version 1.0.0

Copyright
Copyright (C) 2009 PLANET Technology Corp. All rights reserved.
The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by
copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted.
No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form by any means by
electronic or mechanical. Including photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal use, and
without the prior express written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied
or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of PLANET. PLANET assumes no responsibility for
any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves
the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and suggestions.
CE mark Warning
The is a class B device, In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic
equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE
as unsorted municipal waste and have to collect such WEEE separately.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not
all cases, their respective companies claim these designations as trademarks or registered trademarks.

Remind
The User Guide to the Wi-Fi Phone ha s b een de si gned to make unde rstanding network i ng with the
Wi-Fi Phone easie r th an ever . Lo ok for the fol l o w ing i t e ms when r e adin g this Us e r Gui d e:
This questi o n mark provi d es you wi th a r e mind er about something you might need to do whi l e using the Wi-Fi Phone.
Thi s c hec km ar k me ans t h er e is a no te o f i n te r e st you should pay special attention to whi l e using the Wi-Fi Phone.
Thi s excla m ation po int me ans ther e is a ca uti o n or w a r n i ng and is something that could dam a ge your Wi-Fi Phone .
In addi ti on to these symbols, ther e ar e definitions for technical terms t h at are presented lik e t h is:
Also , e a c h figure (diagram, scr e enshot, or other ima g e) is pro v id ed wi th a fi gur e number and desc ription, like word: definition. Figure numbers
and descriptions can al so be found in the “List of Figures” section.
Figur e 0- 1: Sample Figure Des c ription
WARNING: This product contains c h emicals, i n cl uding lead , k n o w n to the State of Ca lifor nia to ca use
cancer , and bir t h defects or other r e pr oductive har m . W a sh hands a f ter handli ng.
Revision
User’s Manual for PLANET Functional Wi-Fi Phone
Model: VIP-193
Rev: 1.0.0 (2009, March)
Part No. EM-VIP193v1

Chapte r 1: What’s in This Use r Gui d e? 1
Chapte r 2: Wi-Fi Phone Panels 3
Chapter 3: In stalling and Us ing the Wi-Fi Phone 7
Inserting the Batte r y into the Wi-Fi Phone 7
Powering on the Wi-Fi Phone 8
Navigating the Wi-Fi Phone 10
Setting up the Wi-Fi Phone 12
Using the Wi-Fi Phone 22
Chapter 4: Configuring the Wi-Fi Phone 25
Instructions for Confi guring the Wi-Fi Phone 25
St at us In fo r matio n 27
How to Access th e We b-based Uti lity 29
Adm i nist rator Access 29
Setting s of the Wi-Fi Phone 30
Chapte r 5: Fo r Admi nistra tors Only 65
Adm i nist rator Settings of the Wi-Fi Phone 65
Accessing th e Web-base d Utility 65
Protecti ng Admi nistr a tor Access 66
Appendix A: Frequently Asked Questi ons 67
Appendix B: FAQ 73

Figure 2-1: Bottom Panel 3
Figure 2-2: Front Pa nel 4
Figure 2-3: Symbol Selection 5
Figure 2-4: Side Panel 6
Figure 2-5: Back Panel 6
Figure 3-1: Press the Button 7
Figure 3-3: Connect the Power 8
Figure 3-4: Front Pa nel 10
Figure 3-5: Symbol Selection 11
Figure 3-6: Scan for Wireless Ne tworks 12
Figure 3-7: Select Wireless Ne twork 12
Figure 3-8: Connect to Wireless Net w ork 13
Figure 3-9: Enter WEP Ke y (Secure d Ne twork) 13
Figure 3-10: Enter WPA Ke y (Secure d Netwo r k) 13
Figure 3-11: Successful Connection 13
Figure 3-12: Select Menu 14
Figure 3-13: Select SIP Settings 14
Figure 3-14: Edit Proxy IP 15
Figure 3-15: Save Proxy IP 1 5
Figure 3-16: Save Proxy Port 16
Figure 3-17: Save Re gister Proxy IP 16
Figure 3-18: Save Re gister Proxy Port 17
Figure 3-19: Save Outbound Proxy IP 17
Figure 3-20: Edit Outbound Proxy Port 18
Figure 3-21: Save Expire Time 18
Figure 3-22: Save Phone Number 19
Figure 3-23: Save User Name 19
Figure 3-24: Save Password 20
Figure 3-25: Save SIP Set t ings 20
Figu re 3-26: Return to Standby Screen 21
Figu re 3-27: Standby Screen 21
Figure 3-28: Call Connected 22
Figure 3-29: Line Options 22
Figure 3-30: Second Call 23
Figure 3-31: Unlock Keys 23
Figure 4-1: Front Panel 25
Figure 4-2: Symbol Selection 26
Figu re 4-3: Standby Screen 27
Figu re 4-4: Standby Screen 28
Figu re 4-5: Main Menu 28
Figure 4-6: Call Log 30
Figure 4-7: Call Log Options 3 0
Figure 4-8: Type o f Phone Number 30
Figure 4-9: Sele ct Phone Book 33
Figure 4-10: Phon e Bo ok 33
Figure 4-11: Phon e Bo ok Options 33
Figure 4-12: Add Person 34
Figure 4-13: Enter Name 34
Figure 4-14: Select Network Settings 35

Figure 4-15: Network Settings – DHCP 35
Figure 4-16: Network Setting s - Fixed IP 36
Figure 4-17: Enter IP Ad dress 36
Figure 4-18: Edit Su bnet Mask 36
Figure 4-19: Enter Subnet Mask 36
Figure 4-20: Wireless 37
Figure 4-21: Scanning for Wireless Networks 37
Figure 4-22: List of Wireless Networks 37
Figure 4-23: Connecting to Wireless Network 38
Figure 4-24: Enter WEP Ke y (fo r Secured Network) 38
Figure 4-25: Enter WPA Ke y (fo r Secured Net w ork) 38
Figure 4-26: Connecting to Wireless Network 38
Figure 4-27: Select Default Hotspot 39
Figure 4-28: Detect Hotspot 40
Figure 4-29: Connecting to Hotspot 40
Figure 4-30: Getting IP Address 40
Figure 4-31: Select IE Browser 40
Figure 4-32: Wi-Fi Profiles 41
Figure 4-33: Edit SSID 41
Figure 4-34: Edit Wireless Mode 41
Figure 4-35: Change Authen tication Mode 42
Figure 4-36: Edit WEP Key 42
Figure 4-37: Enter WEP Key 42
Figure 4-38: Change EAP Type (802.1x) 42
Figu re 4-39: Edit EAP Type (WPA -PSK) 43
Figu re 4-40: Change EAP Type (WPA-PSK) 43
Figure 4-41: Enter SSID 43
Figure 4-42: Change Transmit Key 44
Figure 4-43: Edit WPA Key 44
Figu re 4-44: Profile Added 45
Figure 4-45: Select Hotspot 46
Figure 4-46: Edit User Name 4 6
Figure 4-47: Select Phone Settings 47
Figure 4-48: Phone Settings 47
Figure 4-49: Ring Options 47
Figure 4-50: Ring Types 47
Figure 4-51: Keypad Tone 48
Figure 4-52: Wallpaper 48
Figure 4-53: Change Time Format 49
Figure 4-54: Change Clock Type 49
Figure 4-55: Change Time Zones 49
Figu re 4-56: Change Daylight Time 49
Figu re 4-57: Enable NTP 50
Figure 4-58: Disable NTP 50
Figure 4-59: Change Date 50
Figure 4-60: Change Clock 50
Figure 4-61: Se l e ct La nguage 51
Figu re 4-62: Language 51

Wi-Fi Phone
Figure 4-63: Password disabled (default) 51
Figure 4-64: Enable Phone Password 51
Figure 4-65: Set User Password 5 2
Figure 4-66: User Phone Passwo r d 52
Figure 4-67: Phone Pa ssword (Admin) 52
Figure 4-68: Auto Ke y lock Setting 53
Figure 4-69: Enable Key lock 53
Figure 4-70: Auto-Provisioning 53
Figure 4-71: Server Type 53
Figure 4-72: Factory Default settings 54
Figure 4-73: Upgrade phon e 54
Figure 4-74: Upgrade phon e 54
Figure 4-75: Edit Download URL 55
Figure 4-76: Edit Proxy Port 55
Figure 4-77: Register Proxy Port 56
Figure 4-78: Edit Proxy IP 56
Figure 4-79: Enter Proxy IP 56
Figure 4-80: Enter Re gister Proxy Port 56
Figure 4-81: Change Outbound Proxy IP 57
Figure 4-82: Outbou nd Proxy Port 57
Figure 4-83: Web Cam 58
Figure 4-84: Web Cam O p tions 58
Figure 4-85: Edit Web Cam 58
Figure 4-86: Add Web Cam 58
Figure 4-87: MSN 60
Figure 4-88: Skype 60
Figure 4-89: Web Site 61
Figure 4-90: Visit Web Site 61
Figure 4-91: Auto-Scroll Option 61
Figure 4-92: Web Site Options 62
Figu re 4-93: Edit Web Site 62
Figure 4-94: Add Web Site 63
Figure 4-95: Information 64
Figu re 5-1: Admin Log i n on Web - based utility 65
Figure 5-2: Protect Admin Access 66
Figu re 5-3: Admin password on Phone 66

Chapter 1: What’s in This User
Guide
Tha nk you for choo si ng the Wi-Fi Phone . It wil l all o w you to make Skype / Wi-Fi Phone ca lls using your
broadband connection, whether yo u ar e at home , in your office , or at a publi c hotspot.
How does th e Wi-Fi Phone d o this? It co nnects to your wir e le ss r o uter or gatew a y, so tel e phon e serv i c e is deli ver e d
thr o ugh your cabl e or DSL Inter n et connecti o n. Y o u can al so surf the I n ter n et with its built-in web bro w ser and
backli t, full-colo r scr e en.
But what does al l of thi s me an? Ne tw or ks ar e useful to ols for sha r ing Inter n et ac ce ss a nd co mpute r r e so ur ces.
Y o ur voi c e c a ll s can sha r e your high-speed I n te r n e t c o nnection. Y o u wil l be a ble to make phone ca lls using the
account you set up with your Inter n et phone serv ic e provi d er , e v e n whi l e yo u ’ r e surfing the I n ter net on your
co mpute r . So , ne twor ks not only are useful in homes and offices, but also can be fun.
Use the i n structi o ns in this Use r Guide to help you conn ect the Wi-Fi Phone afte r you have se t up a n acco unt with
your Inter n e t phone serv ic e provi d er . T hese in struc ti o ns should be all yo u need to ge t the most out of the Wi-Fi
Phone .
This guide covers the st eps f o r installing t h e Wi-Fi Phone .
• C hapter 1: What’s in This User Guide
Thi s c hapte r de scr i bes the Wi-Fi Phone ’ s applications and thi s User Guide .
IP
(inter net protoc ol ): a protoc ol used to
send data ov er a network.
Netw ork : a se ries of c o mpute r s or
devices connected for the purpose of
da ta shar i ng, sto r age , a nd/ or
tr ansmission b e twee n users.
NO TE: For infor m a ti o n
about your Inter net phone
serv ice , r e fer to the mat e rials
provided by yo ur Inter n et
phone serv ice provi d er .
1
Chapter 1: What’s in This User Guide

• C hapter 2: Wi-Fi Phone Panels
T h is c h a p ter desc ribe s the physic a l featur es of the Wi-Fi Phone .
• C hapter 3: I nstalling and Using the Wi-Fi Phone
This chapter ex pl ains how to install the Wi-Fi Phone and use it.
• C hapter 4: Config uring the Wi-Fi Phone
This ch apter discusses how to configure the Wi-Fi Phone’ s setti ngs.
• A ppend ix A: T r oubleshooting
This appendix descr i bes some potent ial pr oblems and so lutions, as we ll as frequently asked questions,
regarding use of the Wi-Fi Phone.
• A ppend ix B: Gl ossary
This appendix gives a br ief glossar y of ter m s fr equently used in networ king .
• A ppend ix C: FAQ
2
Chapter 1: What’s in This User Guide

Chapter 2: Wi-Fi Phone Panels
The Bottom P a nel
The Wi-Fi Phone ’ s headset ja c k and USB po r t a r e l o ca te d on t h e bo tt om pane l .
Headset
Ja c k
US B P o r t
Figur e 2-1: Bo ttom P a n e l
Hea d set Jack This j a c k all o ws yo u to connect a headset.
USB Po rt The USB po rt allows you t o attach the included power adapter .
3
Chapter 2: Wi-Fi Phone Panels

The Fr
ont and Side P a nels
The p o wer L E D is located a t the top o f the Wi-Fi Phone, whil e its buttons a r e loca te d on the front and side
panels.
Po wer L E D B l u e/Re d/Purp le . The L E D is a solid bl ue when the Wi-Fi Phone i s po wered on a nd ready
fo r phone ca lls. It fl ashes r e d whe n the Wi-Fi Phone i s no t ready for phone c a ll s.
The LED alter n ates between blu e and pur pl e when the Wi-Fi Phone is po wered off and
c h ar ging .
The buttons of the Wi-Fi Phone ar e descr i bed i n thi s tabl e .
Ico
n Butto n Nam e F unction
Po w e r L E D
So ft K e y S e lects the appropriate action
show
n on th e left- or right- h a nd
side of the scr
een
N a v i gation P a d
a nd Center
Soft K e y Sof t K e y
Na vigation P a d
and Ce nter
Selection K e y
L e ts you nav i gate menus and
sele ct your c hoices
C o ntrols c u rsor for it s w e b
br o w s e r
Selection K e y Call
Po w e r
or E nd Call
Ca ll Uses
Inter net phone line
Differ e nt K ey
Choices or + Sig n
Enter Symbol
or Space
Figure 2-2 : Front P a nel
4
Chap ter 2: Wi-Fi Phone Panels

Ico n Butto n Nam e F unction
P o w e r or E nd Ca ll Pr ess and hold this bu tton for
t w o se conds to power the
Wi-Fi Phone
o n or off . E nds
the c
a ll or exits the c u rr ent
menu
Differ ent Key
Choi ces o r + Sign
Enter Symbol or
Space
T o enter an entry or setting , use
t he ke y p ad . Key s 1 - 9 can
represent upper
c ase letters (A,
B , C), lower c as e letters (a, b, c ) ,
or numbers (1, 2,
3). Press the *
(star) key to switc h between
t h e differ e nt c hoices.
Pr ess th e * (star) key twic e to
enter the + sign.
Pr ess the # ( p oun d ) key to op en
t h e Symbol Selec t ion menu.
Use the n a vigation pad to move
t hrough the menu. When y o u
h
a ve the appropriate symbol
h
i ghlighted , pr es s the center
sele ction k e y .
Pr ess th e # (pound) key twice
t o enter a space.
Chapter 2: Wi-Fi Phone Pan e ls
Fig u r e 2 - 3: Symbol
Selection
5

Ico n Butto n Nam e F unction
Vo l u m e Incr ease s or decr ea ses
the volum
e
The Back P a nel
The Wi-Fi Phone ’ s b a tte r y c o mpartment is lo cated o n th e back
pane l of the Wi-Fi Phone . For dir e ction s on how to inser t the
batter y, r e fer to “Chap t er 3: I nstalling and Using the Wi-Fi Phone. ”
V olu me
Bat t ery
Compartmen t
Figure 2-4: Side Pa nel
Fig u r e 2-5: Back P a nel
6
Chap ter 2: Wi-Fi Phone Panels

Chapter 3: Installing and Using the Wi-Fi Phone
This chapter pr o v ide s i n structi o ns for first- time inst allation and use of the Wi-Fi Phone . Y o u will insert the batter y
into the Wi-Fi Phone and then set it up for your wi r e l e ss ne twork and Inter net phone serv ice . Th en you wi ll be able
to mak e and r e ceive Inter n et phone calls.
Inse rting the Battery into the Wi-Fi Phone
T o ins e r t t h e ba tt er y, fo ll o w t h ese i n str u c ti o ns:
1. Remo ve the co ver of the batter y compartment. Push do wn on the bu tton a nd slide the c o ver do wnw a r d.
2. Ins e rt the batter y. Mak e sure the metal contacts of the batter y line up w it h the metal c o nt ac ts of the
ba tter y c o mpartment.
3. I n sert the door and slide it upw ar d until it snaps into pl ace .
Proceed t o t h e next section, “ P ow ering on the Wi-Fi Phone . ”
But t on
Fig u r e 3-1: Pr ess
the Button
7
Chapter 3: In stalling an d U sing the Wi-Fi Phone

P
o wering on the Wi-Fi Phone
Make sur e yo u have the a ccount information, includi ng necessary Wi-Fi Phone settings, supplied by your Inter n et
phone serv i c e prov ider . If you al r e ad y have an account set up wi th you r Inter net phone serv i c e pr o v ider , then
proc ee ds to step 1. If you do not have an account, then go to the website of your In ter net phone serv i c e pr o v ider
and sign up for serv i c e . After you ha ve set up an account, proceed to step 1.
1. Mak e sure you have the account i n for mation, incl uding necessary Wi-Fi Phone setti ngs, suppl ied b y your
2. I n ter net phone serv ice provider .
2. Plug the USB mini -B c o nne ctor of the i n clu ded po wer ad a p ter into the U S B mi ni-B port of the Wi-Fi Phone .
Then c o nne ct th e po wer a d apter to a standar d e l ec tr ica l outlet.
3.
T h e power LED wil l fl ash, alter n at ing between blue and purple. For the ini t ial char ge , al low the batter y to
charge for at least 1 0 hours, so the batter y wil l ha ve a ful l c h ar ge , whic h i s i ndicated b y a sol i dly li t power
L E D . Th is maximizes batter y perfor manc e and li fe .
NO TE: When the batter y is low on po wer , i t w ill emit one w a r n i ng sound or vib r ation,
unl ess the Ring T ype is set to Silent. (For mor e infor mat ion about R i ng T ypes, r e fer to
Chapter 4: Con f igu r ing the Wi-Fi Phone. ”)
When the batte ry is fully char ged, pr oceed to “Na vigating the Wi-Fi Phone . ”
Figur e 3-3: Connec t the P o w e r
8
Chapter 3: In stalling and Using the Wi-Fi Phone

Na vigating the Wi-Fi Phone
Revi ew the descri pti o ns of the buttons you wil l use to navigate menus and select you r c hoices.
Ico n Butto n Nam e F unction
So ft K e y Pr ess t h e left or right soft key
to
s e lect the appropri ate action
show n on th e left- or right- h a nd
side of the scr
een.
Po w e r L E D
Na vigation P a d
and Ce nter
Selection K e y
T o navigate menus and control
t h e cursor for the web browser ,
u
s e the navigation p a d.
Use t he center selection key to
mak e menu choice s.
Ke y Choice
Ca ll Uses Inter net phone line
P o w e r or E nd Ca ll T o exit a menu w i thout making
changes , press this but ton.
N a v i gation P a d
a nd Center
Selection K
e y
Soft K e y
Call
Sof t K e y
Po w e r
or E nd Call
Different
alpha
-nu m eric
K ey Choices,
or
+ Sign Figur e
Figure 3-4: Front
Panel
Enter Symbol
or Space
9
Chapter 3: In stalling and Using the Wi-Fi Phone

Ico n Butto n Nam e F unction
Differ ent Key
Choi ces o r + Sign
Enter Symbol or
Space
T o enter an entry or setting , use
t he ke y p ad . Key s 1 - 9 can
represent upper
c ase letters (A,
B , C), lower c as e letters (a, b, c ) ,
or numbers (1, 2,
3). Press the *
(star) key to switc h between
t h e differ e nt c hoices.
Pr ess th e * (star) key twic e to
enter the + sign.
Pr ess the # ( p oun d ) key to op en
t h e Symbol Selec t ion menu.
Use the n a vigation pad to move
t hrough the menu. When y o u
h
a ve the appropriate symbol
h
i ghlighted , pr es s the center
sele ction k e y .
Pr ess th e # (pound) key twice
t o enter a space.
For more de ta ils , re fer to “C hapter 2: Wi-Fi Phone Panels . ”
Proceed t o “Setting up the Wi-Fi Phone . ”
Figu r e 3 - 5: Symbol
Selection
10
Chapter 3: In stalling an d U sing the Wi-Fi Phone

Setting up the Wi-Fi Phone
Be fo r e you be gin, make sur e yo ur network ha s an ac ti ve Intern et co nnec ti o n.
1. Pr ess and hold the Po w e r button for two seconds.
2. T h e Wi-Fi Phone wi ll boot up and automa tic a ll y sc an for wireless network s.
3. A li st of wir e less netw orks wi ll be displayed and sh ow their wir e l e ss ne twor k names (also known as Se r v i c e S e t
Ide n tifi er or SS ID ), se c u rit y s t atus (a l o c k indicates wir e less secur i ty), and signal str e ngth, which is i ndicated b y a bar
g r aph.
Fig u r e 3-6: Scan for
Wir e less Netw ork s
Scroll thr o ugh the network c hoices, a nd pr ess the center sel e ction k e y (in the mid d le of the navi gation pad)
to select the wir e less network y o u w a nt t o us e .
I f the network you w a nt is not sho w n, select Rescan fo r a ne w s c a n.
F i gur e 3 - 7: Select Wir e less
Netw ork
11
Chapter 3: In stalling and Using the Wi-Fi Phone

4. T h e Wi-Fi Phone wi ll auto ma ti cal l y connec t to the ne twork you ha ve se lec t e d.
I f WEP security is enab led on the se lecte d network, a new scr e en will a ppear. Using the navigation
pad, select
the appropriate transmit k e y number and then move to the WEP Key fi eld. Enter the
netw ork’ s WEP key . Pr ess the center selection k e y.
If WP A se cur i ty i s e n abl e d on t h e s e l e cte d network, a new scr e en will appear. Enter the
ne two r k’ s WP A key . Pr ess the ce nte r sele ction key .
Fig u r e 3-8: Connect to
Wir e less Netw ork
Figu r e 3-9: Enter WEP
Ke y (Secur e d Netwo r k)
5. Y o u wi ll be not ifi ed w h en t h e Wi-Fi Phone ha s c o nne ct ed t o the ne tw or k , a nd a chec kma r k
wi
ll appear ne xt to the name of the network.
Select Exit .
If y o u a r e NO T an administ r a tor , please proceed to the next section.
If y o u ar e an ad minist r a tor , y o u will need Admini str a tor access to set up SIP settings. If
y o u do not ha v e Admin access, please r e fer t o the c h apter “ F or Admini str a tors Only”.
Chapter 3: In stalling an d U sing the Wi-Fi Phone
Fig u r e 3-10: En te r WP A
Ke
y ( S ecur e d Netwo r k)
Fig u r e 3-11: Successful
Connection
12

6. The standb
y screen will appear . Select Men u . If you are an ad mi nistrator , you need to set up SIP Settings.
Y o u may ha ve a l r ea d y se t your passwor d. Have you a l r ea dy set the p a ssw o r d from the W e b-based utility?
Figure 3-1 2: Select Menu
7. Select Phone Se ttings. Nav i ga te the menu choi ces and select Phone Pa ss wo r d . Pr ess the Edit soft key until the te xt
display s Ye s .
8. The defaul t password is “ us er ”. If you ar e unsur e , ho wever , c hange your passwor d no w . Pr ess th e Retur n sof t k e y to select
the settings f o r a pass w o rd and r e t u r n to the menu.
9. Power do wn the phone and tur n it bac k on. Phone Passw or d display s . Pr ess the Ca ll button fo r 3 s e conds.
Phone Passwor d (Admin.) display s. Enter you r admin pass word ( f actor y default is “ WL800ADM ”).
TI P : Press the star key ( *) twic e to access nume r ic key pr e s se s. Press the OK sof t k ey.
10. T he standby screen appear s. Sel e c t Men u .
11. Phone Settin gs will be highlig hted. Navi gate the menu choices, and then select SI P Settings . (SIP s t ands for
Sessio n Initia tio n Protocol.)
Figur e 3 - 13: Select SIP
Setti ngs
13
Chapter 3: In stalling and Using the Wi-Fi Phone