Polycom SoundStation VTX1000 User manual

SoundStation® VTX 1000 QUICK INSTALLATION GUIDE
Quick
Installation Guide

SoundStation VTX 1000 Quick Installation Guide
Connection Diagram
Power cables may differ.
For future applications

SoundStation VTX 1000 Quick Installation Guide
SoundStation VTX 1000 Interface
Menu Button
Displays a menu of
settings and options
Exit Button
Exits from current
screen to previous level
Scroll Buttons
Navigate up or down
through displayed lists
Select Button
Select a highlighted
item from a menu
Conference Button
Call, join, or hang-up
additional call participants
on properly congured
enterprise phone networks
Dialing Keypad
Enter numbers
or letters
[phone]
Ready
REDIALPH BOOKSP DIAL
LCD
Information and
Input Area
Displays of
information, menus,
and input areas
LEDs
Green – Your call is in progress.
Blinking Green – A call is incoming.
Red – Your call is muted.
Blinking Red – Your call is on hold.
This Phone’s Number
Soft Key Functions
Actions you can currently
take, based on the state
of the phone
Soft Keys
Select the actions that
are currently displayed
Phone Button
Answer an incoming
call, get a dial tone,
initiate an entered call,
or hang up a call
Volume Buttons
Adjust the speaker and
ringer volume
Mute Button
Turn mute on or off
Buttons
The SoundStation VTX1000 is a
conference phone and can only perform
multipoint bridged conference calls on
a properly configured enterprise phone
network or when multipoint calls are
placed through a conference bridge
or a bridging service. Please contact
your telephone system administrator
for further details.
Multipoint Conference Bridging

Press the (Phone) button to pick up an
incoming call.
Editable Dialing
1 Dial the phone number.
 If you make an error,
press the <DEL soft key to erase it.
 If you want to cancel the call,
press the CANCEL soft key.
2 Press the button or
the SEND soft key, and the
complete number will be dialed.
Dial Tone Dialing
1 Press the (Phone) button
to get a dial tone.
2 Dial the phone number.
Each number is dialed when
you press it.
Speed Dial numbers are not
supported by this method.
You can dial a call the traditional way,
getting a dial tone first, or you can
dial the way cellular phones do, entering
and editing all the numbers before
you outpulse them, as shown below.
Dial a Call
Answer a Call
The three LEDs blink green when the phone rings.
OR
SEND
OR
SEND
When you answer a call from another VTX
phone, your SoundStation VTX 1000 tests
the quality of your line, and then initiates
a wideband connection. This process takes
6–12 seconds, during which you hear
music, and both ends of the call are
unable to converse. The icon
is displayed once a wideband connection
has been established.
End a Call
To end a call, press the button.
 If more than one party is connected,
all calls will be disconnected when
you press the button.
The duration of your ended call
will be displayed for 20 seconds.
0:05:23
SP DIAL PH BOOK REDIAL
(555)-555-1111call ended
For all other phone functions and
information, please see your SoundStation
VTX 1000 Operation Manual.