Polycom VVX 300 User manual

Polycom VVX300-310
1
VoIP User Guide
Polycom VVX300/310

Polycom VVX300-310
2
Hosted VoIP Services
Welcome to GCI Hosted VoIP services. Detailed below is a basic user guide
outlining the simplicity of the service. Depending on the type of handset you
use, some of the functions will be visible on a “soft key” (a button on the
handset with the service already registered). The “soft keys” are normally
associated with digital handsets whereas analogue handsets will require a
manual input of access codes to use the service. Common features of the
Polycom VVX300/310 digital handset are detailed below:
Polycom SoundPoint VVX300/310
Phone Feature Description
1. Handset Pick up to make or answer a call.
2. LCD Screen Displays date and time, line
extensions, and softkey options.
3. Line keys, 6 Line Keys on the VVX300/310
4. Menu Key. This provides multi options as
follows: Directory, Call history, Phone settings
etc
5. Menu Scroll wheel, quick search for call
history or selecting options from menu. LEFT
key =back, UP key = speed dial, RIGHT
Key = placed calls, DOWN key = received calls
6. Headset Key, if preferred audio device is handset, you can use a headset ad-
hoc by pressing this key.
7. Speaker key, pressing this key will put a private call onto speakerphone.
8. Mute button: Press to mute/unmute the phone. When phone is muted, this
button changes to ‘RED’
9. Alphanumeric keypad
10. Volume button Press + to increase the volume and - to lower the volume of
the handset, headset, speaker (when the handset is o the phone), or ringer
volume (when the handset is on the phone).
11. Hold Key, press during a call to put caller on hold, press again (or resume key)
to retrieve caller.
12. Message Centre, voicemail retrieval key (also soft key option or simply dial your
extension).
13. Transfer key, can be used to transfer calls blind and announced (also soft key
option).
14. Soft keys, these will change depending on the status of handset in idle or busy
modes. Options are New Call, DND, answer/ignore, pickup messages etc.

Polycom VVX300-310
3
How to use your handset:
Once you have dialled a number, there will be a 3-5 second delay before
connecting the call. This is due to the service awaiting a further command. If
you complete the dialled number then pick-up the handset, press the “dial”
key (left key below screen), press the headset/speakerphone or # key, this
tells the system your number range is complete and will connect the call
without any further delays ie: 0161 123 4567 dial (#)
Answer a Call
Pick up the Handset, or press the Speaker button, or press the Headset button.
Place a call
Dial the number with the handset on hook and after the completion of the
dialled number, pick up the handset/press the headset key/press the dial key or
press the speaker key. Alternatively, pick up the handset (or press the Speaker
or Headset button), dial the number followed by the # or dial button.
Receiving a second call with a call in progress
While first call is active, press the flashing red line button or press the Hold
button to put first call on hold and answer the second call.
Call Hold
To put a call on hold, press the Hold button. The caller hears a series of three
rapid beeps or Music on Hold.
To resume the call, press the Resume soft key or the Hold key again.
Call Transfer
Announced Transfer – Press either transfer key, dial the extension number and
press dial key, announce the call then press transfer key again.
Blind Transfer – Press either transfer key, dial the extension number, select dial,
once ringing press transfer key once more.
In Idle state softkey reads as:
A = New call
B = Do not disturb
C = Pickup
D = Retrieve
In busy state softkey / LCD
reads as:
A = Line status (green in call)
B = Call details
C = Hold
D = End Call
E = Transfer
F = More Options
Additional screen shots in idle and busy views:

Polycom VVX300-310
4
Feature Access Codes
When using the codes, you will be guided through the process by an
automated service.
For example, if you want to access your voicemail, Messages key OR dial your
extension, you will then be asked to enter your pass code followed by the #
key. Once entered, you will have a choice to listen to new messages, reset your
greeting etc. Set up code for Voicemail is 1379, this will need changing on first
login and then every 60 days.
The internal transfer/extension number is the last 3 or 4 digits of your DDI
as displayed on the handset (this will be determined by your company
administrator).
Description Code Additional instructions (attended
announcement)
All codes should be finished by pressing the dial key or # key to activate the command.
Call forward always on
(to another number):
*72 Followed by forward number and # when
prompted
Call forward always o
(to another number):
*73 Announcement confirms deactivated
Call forward always on (to voicemail): *21 Announcements confirms applied
Call forward always o (to voicemail): #21 Announcement confirms deactivated
Call Park: *68 Press hold key, followed by *68 then follow
instructions
Call Park Retrieve: *88 Dial code then follow instructions
Call Pickup: *98 When other phone is ringing, press soft key or
dial code
Call Return: *69 Dial code
Do Not Disturb on : *78 Dial code or use soft key
Do Not Disturb o : *79 Dial code or use soft key

Polycom VVX300-310
5
Feature Description:
Call Forwarding Always
Call Forwarding Always enables a user to redirect all incoming calls to another
phone number. Users have the option to activate and deactivate the service by
dialling the feature code.
Call Park/Retrieve
Enables a user to hold a call and to retrieve it from another station within the
group. To park a call, a user depresses the hold key and dials the call park
feature code. The call is parked and the caller is held. To retrieve the call, the
user goes to any phone in the group and dials the call retrieve feature code,
followed by the user’s extension. The call is retrieved and connected to the
retrieving user.
Call Pickup
Enables a user to answer any ringing line within their pick up group. To pickup
a ringing call, a user dials the call pick up feature code. The user is then
connected to the caller. If more than one line in the pickup group is ringing, the
call that has been ringing the longest is answered.
Call Return
Enables a user to call the last party that called, whether or not the call was
answered. To call back the last party that called, the user dials the call recall
feature code. The system stores the number of the last party to call, and
connects the user to that party.
Do Not Disturb
Allows users to set their station as unavailable so that incoming calls are given
a busy tone. Users have the option to activate and deactivate the service by
dialling a feature code or configuring the service via their web interface. A
status indicator on the Toolbar identifies whether this service is enabled.
Voicemail
By accessing the Voice Portal from any phone, users can listen to, save, and
delete each message, as well as move to the previous or next message. During
the playback of a message, users have the option of skipping forward, skipping
back, or pausing. Replies to message senders can be sent, and messages can
be forwarded with an introductory message to one or more group members,
or to the entire group. The Voice Portal also enables users to record their name
and multiple personal greetings for busy and unavailable.
For further information please contact your account manager in the first instance or our
helpdesk as below:
Email: service[email protected] | Service desk direct dial: 0844 443 3538