PolyVision ?no User manual

Part number 370-0330-00
©2010 PolyVision Corporation
All rights reserved
ēno™ intera tive whiteboard
user guide

Information in this do ument is subje t to hange without noti e.
Reprodu tion in any manner without written permission of PolyVision
Corporation is forbidden.
PolyVision is a registered trademark of Steel ase, In . ēno, Walk-and-
Talk and Lightning are trademarks of PolyVision Corporation. Webster
is a registered trademark of PolyVision Corporation.
This produ t is overed by one or more of the following patents:
Canada 2,100,624; EPO 600,576; EPO 871,935; Germany
69,321,445; WO 98/14888; US 4,777,329; US 5,248,856; US
5,327,161; US 5,434,370; US 5,583,323; US 5,585,605; US
5,623,129; US 5,665,942; US 5,790,114; US 5,838,309 US
6,353,193; US 6,355,895; US 6,445,384; US 6,667,739; Other
patents pending.
PolyVision Corporation reserves the right to make hanges in produ t
design, or detail, and to dis ontinue any produ t or material without
noti e.
Flash™ Player, Sho kwave® Player, and Authorware® Player are
owned by Adobe Systems.

PolyVision 1
Wel ome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What are ēno intera tive whiteboards?. . . . . . . . . . . . . . . . . . . . . . . . 1
Multiple ēno users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Register your PolyVision produ t . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing ēno intera tive whiteboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ēno installation options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation he klist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Mounting ēno 2610 and 2810 to a wall . . . . . . . . . . . . . . . . . . . . . . . 4
What omes in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mount the ēno 2610 and 2810 whiteboard on the wall. . . . . . . . . . 6
Position the wall bra kets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mount the bra kets to the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Mount the whiteboard to the wall bra kets . . . . . . . . . . . . . . . . . . 10
Magneti ally mounting ēno li k whiteboards (2650 and 2850) . . . . 11
What omes in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Preparing to magneti ally mount ēno li k . . . . . . . . . . . . . . . . . . 12
Magneti ally mounting the ēno li k . . . . . . . . . . . . . . . . . . . . . . . 13
Removing the magneti ally-mounted ēno li k whiteboard. . . . . . 15
Install the ontrol i ons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Install the PolyVision driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PolyVision driver installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Preparing to use ēno . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Add batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Install the ēno stylus battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power on and off the stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pair the ēno stylus Bluetooth signal with your omputer . . . . . . . . . . 21
Unpairing the ēno stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
LED status summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Getting started in proje tion mode . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using ēno intera tive whiteboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Get started using ēno intera tive whiteboards . . . . . . . . . . . . . . . . . 26
ēno intera tive whiteboard ontrol i ons . . . . . . . . . . . . . . . . . . . . . 28
Control i on options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cursor ontrol using the ēno stylus . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table of ontents

PolyVision 2
Using the on-s reen keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Writing and erasing with the ēno stylus. . . . . . . . . . . . . . . . . . . . . . . 30
Changing the pen style. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Printing and saving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Spotlight and reveal options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Spotlighting your work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Revealing your work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Opening a blank window for writing . . . . . . . . . . . . . . . . . . . . . . . . . 34
The PolyVision driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuring PolyVision driver options . . . . . . . . . . . . . . . . . . . . . . . . 35
General options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Save options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Draw options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Print options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Proje tion options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Hardware options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Status of the PolyVision driver . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Choosing alignment a ura y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using on-s reen tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Che king for updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Exiting the PolyVision driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
To uninstall the PolyVision driver in Windows . . . . . . . . . . . . . . . . . . 44
To uninstall the PolyVision driver on a Ma intosh . . . . . . . . . . . . . . . 45
To uninstall the PolyVision driver using Linux . . . . . . . . . . . . . . . . . . 45
Care and maintenan e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
ēno maintenan e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Repla ing the ēno stylus batteries . . . . . . . . . . . . . . . . . . . . . . . . 46
Repla ing the ēno stylus tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
How to obtain repla ement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Summer maintenan e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Te hni al support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Complian e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
FCC omplian e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
CE omplian e. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
WEEE omplian e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Appendix 1: ēno Bluetooth pairing options . . . . . . . . . . . . . . . . . . . . . . 53
Pairing ēno using the PolyVision driver . . . . . . . . . . . . . . . . . . . . . . . 53

PolyVision 3
Pairing ēno using built-in Windows, Linux or Apple Bluetooth. . . . . . 54
Pairing ēno using third-party Bluetooth. . . . . . . . . . . . . . . . . . . . . . . 55
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

PolyVision 1
Wel ome
Wel ome
Congratulations on your pur hase of a PolyVision® ēno™ intera tive
whiteboard.
What are ēno intera tive whiteboards?
ēno intera tive whiteboards provide ordless intera tivity with a omputer
using the Bluetooth-enabled ēno stylus. While the omputer is proje ted
onto the ēno intera tive whiteboard, use the stylus to:
Ŗnavigate through do uments, presentation, or websites on the
whiteboard
Ŗwrite and erase notes
Ŗprint or save your work
ēno intera tive whiteboards are made from erami steel so you an also
use them with dry-erase markers and magnets.
note:NOTE:
The ēno intera tive whiteboard promotes ollaboration by enabling multiple
users, ea h with their own stylus.
SmallEraser
DashedPen
SolidPen
NarrowPen
BlackPen
GreenPen
BluePen
RedPen
PenStyle
Pen/Cursor
MediumPen
WidePen
EraseAll
Print
Save
LargeEraser
Keyboard
Next
Previous
Projection

PolyVision 2
Wel ome
Multiple ēno users
The ēno intera tive whiteboard provides a ordless experien e for
presentations and ollaboration. Multiple users (up to three), ea h with their
own stylus, an write, erase, and operate the omputer that is proje ted on
the whiteboard.
All users must have an ēno stylus with its Bluetooth signal paired to the
same omputer that is proje ted on the whiteboard. Refer to “Pair the ēno
stylus Bluetooth signal with your omputer” on page 21.
Ea h user has equal ontrol. All parti ipants an write at the same time
using a unique pen olor and pen width. When one parti ipant taps the
pen/ ursor ontrol i on, all styli toggle between the pen and ursor
fun tions. Only one stylus at a time an ontrol the ursor.
note:NOTE:
The ēno mini and ēno intera tive whiteboard use the same stylus. When
multiple styli are paired with a omputer, it does not matter whether they
are used on the ēno intera tive whiteboard or on the ēno mini. (Refer to
“Using ēno intera tive whiteboards” on page 26.)
Register your PolyVision produ t
By registering your produ t, you re eive enhan ed ustomer servi e with
information on software upgrades.
To register your PolyVision produ t:
ŖRegister on-line at:
http://register.polyvision. om

PolyVision 3
Installing ēno intera tive whiteboards
Installing ēno intera tive whiteboards
Two people are needed for portions of this installation.
ēno installation options
PolyVision provides these ēno intera tive whiteboard installation options:
Ŗēno 2610: a 4’ x 6’ (1223mm x 1638mm) wall-mounted whiteboard that
you an install permanently on any wall using instru tions provided in
this manual. ēno 2610 an also be mounted on a mobile stand available
from your PolyVision dealer. If you use the mobile stand option, follow
the mounting instru tions provided with the mobile stand, then pro eed
to “Install the PolyVision driver”.
Ŗēno 2810: a 4’ x 8’ (1223mm x 2171mm) whiteboard that you an
mount permanently on any wall using instru tions provided in this
manual.
Ŗēno li k 2650 and 2850: the 75” (1905mm) and 93” (2362mm)
magneti ally-mounted intera tive whiteboard that you an mount to a
metal surfa e using instru tions provided in this manual. ēno li k
whiteboards adhere to any metal surfa e, su h as another whiteboard,
using unique magneti fasteners that make it safe to use and easy to
remove.
Installation he klist
1. Mount the ēno intera tive whiteboard (2610 or 2810) to a wall.
(Refer to “Mounting ēno 2610 and 2810 to a wall” on page 4)
Or,
1. Mount the ēno li k intera tive whiteboard (2650 or 2850) to a
magneti surfa e. (Refer to “Magneti ally mounting ēno li k
whiteboards (2650 and 2850)” on page 11.)
2. Install the ontrol i ons. (Refer to “Install the ontrol i ons” on
page 16.)
3. Install the PolyVision driver on the omputer. (Refer to “Install the
PolyVision driver” on page 17.)

PolyVision 4
Installing ēno intera tive whiteboards
4. Prepare the ēno stylus for use. (Refer to “Preparing to use ēno” on
page 20.)
5. Conne t a proje tor to the omputer. (Refer to “Getting started in
proje tion mode” on page 24.)
6. Test the ēno whiteboard. (Refer to “Get started using ēno intera tive
whiteboards” on page 26.)
Mounting ēno 2610 and 2810 to a wall
You need to provide the following tools:

PolyVision 5
Installing ēno intera tive whiteboards
What omes in the box
1. ēno stylus kit ontaining the stylus, battery, two extra stylus tips, and
Bluetooth adapter
2. magneti ontrol i on strip
3. ēno (2610 or 2810) whiteboard
4. two (2610) or three (2810) mounting bra kets
5. four (2610) or six (2810) #8 x 0.5 Phillips pan-head self-drilling
s rews
6. four (2610) or six (2810) #8 x 1.75 Phillips pan-head zin -plated
s rews
7. four (2610) or six (2810) wall an hors
8. PolyVision driver installation CD
E2210#080900/1/A Beta - Not
for Resale
1
2
3
5
6
87
4
580
-
0202
-
03

PolyVision 6
Installing ēno intera tive whiteboards
Mount the ēno 2610 and 2810 whiteboard on the wall
These instru tions guide you through installing your ēno whiteboard on a
sheetro k wall. If your wall material is some other substan e, su h as
on rete or bri k, use these instru tions as a guideline but install
appropriate an hors to se ure the unit to the wall.
Lo ate and have ready to use:
Ŗtape measure
ŖPhillips s rewdriver
Ŗdrill
Ŗlevel
Ŗsafety glasses
Ŗpen il
Ŗstud finder
Ŗstep stool
Ŗmodels 2610: two wall bra kets and four sheetro k an hors with
s rews (provided)
Ŗmodels 2810: three wall bra kets and six sheetro k an hors with
s rews (provided)
note:NOTE:
Instru tions and fasteners are provided to help you install the whiteboard
when walls have metal or wood studs. Be sure to lo ate wall studs and use
them to drive mounting s rews whenever possible.
Position the wall bra kets
To position the wall bra kets:
1. Choose a lo ation on the wall with onvenient a ess to your
omputer and a proje tor onne tion.
2. Where possible, lo ate wall studs and sele t drill-hole lo ations that
align with wall studs. Sheetro k an hors are provided in ase studs
annot be used.

PolyVision 7
Installing ēno intera tive whiteboards
3. Carefully mark a line that is 83” (2106mm) from the floor. Use a
bubble level to assure that the line is truly level.
4. Use the top and bottom drill-hole lo ations on the mounting
bra kets as a template to arefully mark four (ēno 2610) or six (ēno
2810) drill-hole lo ations.
5. If you are mounting to a sheetro k wall, install four (ēno 2610) or six
(ēno 2810) sheetro k an hors in the wall at the marked hole
lo ations.
83”
(2108mm)
(1638mm)
(1223mm)
48.160”
(1223mm)
48.160”
64.490”
83”
(2108mm) (2171mm)
ēno 2610 ēno 2810
85.480”
(812mm)
32"
(812mm)
32"
ēno
2810
(1321mm)
52"
ēno
2610

PolyVision 8
Installing ēno intera tive whiteboards
Mount the bra kets to the wall
To mount the wall bra kets:
1. If you are mounting to sheetro k, fasten the two (ēno 2610) or three
(2810) mounting bra kets to the wall an hors, as shown.

PolyVision 9
Installing ēno intera tive whiteboards
If you are mounting to on rete or bri k, fasten the two (ēno 2610)
or three (2810) mounting bra kets to the wall, as shown.

PolyVision 10
Installing ēno intera tive whiteboards
Mount the whiteboard to the wall bra kets
To mount the whiteboard:
1. With the help of an assistant, lift the whiteboard and hang it from the
wall bra kets, as shown.
E2210#080900/1/A Beta - Not for Resale

PolyVision 11
Installing ēno intera tive whiteboards
2. Fasten the whiteboard to the upper edge of the wall bra kets using
the four (ēno 2610) or six (ēno 2810) s rews provided.
When the whiteboard is mounted to the wall, refer to “Install the ontrol
i ons” on page 16.
Magneti ally mounting ēno li k whiteboards (2650 and 2850)
Two people are needed to magneti ally mount and remove the ēno li k
whiteboards (2650 and 2850) from a metal surfa e su h as another
whiteboard or bla kboard. You need to provide the following:
E2210#080900/1/A Beta - Not for Resale

PolyVision 12
Installing ēno intera tive whiteboards
What omes in the box
Ŗēno li k (2650 or 2850) intera tive whiteboard
Ŗmagneti ontrol i on strip
Ŗēno stylus kit ontaining the stylus, battery, two extra stylus tips, and
Bluetooth adapter
ŖPolyVision driver installation CD
Preparing to magneti ally mount ēno li k
ēno li k intera tive whiteboards fasten to any metal surfa e, in luding
most bla kboards and whiteboards, using strong, se ure magnets that
ause no damage to the surfa e.
To prepare for magneti ally-mounting the ēno li k whiteboard:
1. Test the surfa e where you want to mount ēno li k whiteboard to
assure it is a metal surfa e.
2. Thoroughly lean the surfa e.
580-0202-03

PolyVision 13
Installing ēno intera tive whiteboards
note:NOTE:
Use a soft loth rag and any leaning solution, su h as 50% al ohol and
50% water.
Magneti ally mounting the ēno li k
To mount the ēno li k whiteboard:
1. With the help of an assistant, lift the ēno li k whiteboard and rest its
bottom edge on or near the pen try of a wall-mounted whiteboard if
possible, or otherwise assure that the ēno li k whiteboard is level
and in the desired position.
2. Move the bottom edge of the ēno li k whiteboard toward the
surfa e and allow its magnets to engage with the magneti surfa e.

PolyVision 14
Installing ēno intera tive whiteboards
3. Gently pivot the top edge of the ēno li k whiteboard toward the
magneti surfa e until the top magnets engage.
4. Use a bubble level to test that the ēno li k whiteboard is level. If it is
not, remove it using instru tions below, then re-mount it.
E2210#080900/1/A Beta - Not for R
esale
E2210#080900/1/A Beta - Not for Resale
E2210#080900/1/A Beta - Not for Resale

PolyVision 15
Installing ēno intera tive whiteboards
Removing the magneti ally-mounted ēno li k whiteboard
Two people are needed to remove the ēno li k whiteboard.
To remove the ēno li k whiteboard:
1. With the help of an assistant, use firm, steady pressure on both
edges of the ēno li k whiteboard simultaneously to pull its bottom
edge away from the magneti surfa e.
2. Pivot the bottom edge of the ēno li k whiteboard up until it is at an
angle of about 40 degrees relative to the floor. The upper magnets
disengage at this angle.
E2210#
080900/1/A Beta - Not for R
esale
E
2210#080900/1/A Beta - Not for R
es
ale