Powerfix Profi PEK 2.3 A1 Instruction sheet

V 1.31
English.................................................................................2
Suomi ................................................................................19
Svenska ............................................................................36
Dansk................................................................................53
Deutsch..............................................................................70

PowerFix PEK 2.3 A1
2 - English
Table of contents
Introduction.............................................................................. 3
Intended use............................................................................. 4
Supplied items.......................................................................... 5
Technical data........................................................................... 6
Safety instructions .................................................................... 6
First use .................................................................................. 10
Overview of the controls and button functions ...............................................10
Inserting/replacing the batteries......................................................................11
Attaching/detaching the gooseneck...............................................................12
Use of the device ..............................................................................................12
Switching the endoscope camera on and off ............................................12
Lighting..........................................................................................................13
Screen brightness .........................................................................................13
Changing the display...................................................................................13
Video-out function.........................................................................................13
Screen displays.............................................................................................14
Fitting the attachments..................................................................................15
Troubleshooting ..................................................................... 16
Cleaning ................................................................................. 16
Environmental and disposal information ................................ 16
Conformity information .......................................................... 17
Copyright ............................................................................... 17
Warranty and servicing advice............................................... 17

PowerFix PEK 2.3 A1
English - 3
Introduction
Thank you for purchasing the endoscope camera PEK 2.3 A1. The endoscope
camera with a flexible gooseneck and adjustable LED lighting can be used in
inaccessible places to aid inspection and fault analysis. You can use the built-in
video-out port, for example, to display the image on a TV.
Please read the following instructions carefully before using the device,
even if you are familiar with the use of electronic devices.
Store these instructions in a safe place for future reference. If you pass on
the device to someone else, be sure to always include these instructions.
WARNING! This symbol indicates important information for
safe use of the device and the safety of the user.
This symbol indicates an intense light source warning.
This symbol indicates other important information on the topic.

PowerFix PEK 2.3 A1
4 - English
Intended use
The endoscope camera PEK 2.3 A1 is an optical inspection device which is not
approved for medical use.
The endoscope camera with a gooseneck and LED lighting can be used in
inaccessible places to aid inspection and fault analysis.
The gooseneck is watertight and suitable for use in aqueous liquids provided
the immersion depth does not exceed 90cm. Please note that only the
gooseneck may be exposed to moisture, and not the control panel (TFT screen
with handle). Use of the device in oils, lyes or acids is not permitted.
The endoscope camera is not suitable for medical applications
or use and should never be inserted into body orifices.
The manufacturer does not assume any liability if
The endoscope camera is not used in accordance with its intended
purpose.
Material damage or personal injuries are caused by incorrect use of the
endoscope camera or non-observance of these instructions.
The endoscope camera is damaged, incomplete or modified prior to
connection and use.
This is an information technology device. It may only be used for private
purposes, but not for industrial or commercial purposes.
Please observe the regulations and laws in the country of use.

PowerFix PEK 2.3 A1
English - 5
Supplied items
A Endoscope camera PowerFix PEK 2.3 A1
B Hard shell case
C Flexible gooseneck with camera head and LED lighting
D Magnet camera attachment
E Hook camera attachment
F Double hook camera attachment
G Mirror camera attachment
H 2 attachment fixtures
I 4 x 1.5V AA / LR6 batteries
J These operating instructions (symbolic representation)

PowerFix PEK 2.3 A1
6 - English
Technical data
TFT screen 5.9cm / 2.31" screen size
Resolution 960 (RGB) x 240 or
320 (pixels) x 240
Camera lighting 4 white LEDs
(with 8-stage adjustment)
Illuminated display with 8-stage adjustment of
brightness
Power supply 6V
4 x 1.5V AA / LR6 batteries
Run time approx. 8 hours
Ambient/outside temperature -10°C to +50°C
Total length of gooseneck with
camera head and adapter base
approx. 1,050mm
Endoscope camera diameter 8mm
Flexible gooseneck Ingress
Protection Rating
IP 67
Weight (including batteries) approx. 407 g
Dimensions of hand unit (W x H x
D)
257 x 92 x 44mm
The technical data and design may be changed without notification.
Safety instructions
General information
LED radiation! Prevent eye injury!
Never look into the LED beam. In the event of a suspected eye
injury, consult a doctor.

PowerFix PEK 2.3 A1
English - 7
The endoscope camera is not approved for medical use! There is
a risk of a potentially fatal injury!
If smoke is produced, or there are any unusual sounds or smells, the
device should not be used until it has been inspected by authorised
service personnel. In this case, switch off the device immediately and
remove the batteries.
Use of the camera on humans and animals is not permitted. The user,
and not the manufacturer, is responsible for any personal injury or
material damage resulting from incorrect use.
Children and persons with disabilities
Electrical devices do not belong in the hands of children. Persons with limited
physical, sensory or mental abilities should also only use electrical devices
appropriately. Never allow children or persons with disabilities to use electrical
devices unsupervised unless they have been instructed accordingly or are
supervised by a person responsible for their safety. Children should always be
supervised to ensure that they do not play with this device. Batteries and small
parts may cause choking resulting in death or serious injury. Store the batteries
in a safe place. If a battery is swallowed, seek medical help immediately.
Always keep plastic packaging out of reach also.
It poses a suffocation risk!
Screen
If the screen becomes scratched or damaged in any way, take special care to
ensure that no liquid leaks from the screen.

PowerFix PEK 2.3 A1
8 - English
If liquid has leaked, follow the instructions below:
If the liquid comes into contact with your skin, wipe it off with a clean
cloth and rinse the area of contact with a large amount of water.
Consult a doctor if necessary.
If the liquid comes into contact with your eyes, rinse them with running
water for at least 15 minutes and then go to a hospital immediately.
Consult a doctor if necessary.
If you swallow the liquid, first rinse your mouth with water, then drink a
large amount of water and induce vomiting. Go to a hospital as soon as
possible. Consult a doctor if necessary.
Operational safety
Ensure that the device is not subject to extreme temperature fluctuations, since
this could result in condensation and electrical short circuits. If the device was
subjected to extreme temperature fluctuations, however, wait (approx. 2 hours)
until the device has reached ambient temperature before use.
Batteries
Always ensure correct polarity of the batteries. Please note the markings on the
batteries and in the battery compartment. Never try to recharge batteries and
never throw them into an open fire. Never use different batteries (old and new,
alkaline and carbon, etc.) at the same time. Remove the batteries if you will not
be using the device for an extended period of time. In the event of improper
use, there is a risk of explosion and leakage.

PowerFix PEK 2.3 A1
English - 9
Batteries may not be dented or opened as leaking chemicals can cause
injuries. In the event of skin or eye contact with chemicals, they must be
immediately rinsed with generous amounts of water and a doctor must be
consulted.
Operating environment/Environmental
conditions
Keep the control panel (TFT screen with handle) away from moisture and
ensure that no foreign objects penetrate the device. Never place any objects
filled with liquids, for example, vases or drinks, on or near the device. Avoid
vibrations, dust and heat, and ensure that the device is not exposed to direct
sunlight or bright artificial light. The device could be damaged as a result.
Ensure that no fire sources (e.g. burning candles) are placed on or near the
device.

PowerFix PEK 2.3 A1
10 - English
First use
Overview of the controls and button functions
1. Screen
2. Power indicator
3. On/off switch
4. View/rotate image button
5. Camera head illumination
button
6. Handle
7. Brightness adjustment display
button
8. Battery compartment (at the back
of the device)
9. Video-out port
10. Flexible gooseneck
11. Camera head with LEDs

PowerFix PEK 2.3 A1
English - 11
Inserting/replacing the batteries
Ensure that the camera is switched off. The battery compartment [8] is located
at the back of the device.
Remove the battery compartment cover by pressing the release mechanism and
lifting the cover upwards. The ribbon in the battery compartment is intended to
facilitate the subsequent removal of the batteries. When inserting the batteries,
make sure that this ribbon runs completely under all 4 batteries and that you
can still access the end of the ribbon after the batteries have been inserted.
Insert 4 x 1.5V AA / LR6
batteries with the correct polarity
in the battery compartment.
Please note the markings in the
battery compartment and on the
batteries.
1. The end of the ribbon should
lie smoothly between the
batteries and battery
compartment cover.
2. Close the battery
compartment by first inserting the
two plastic tabs of the battery
compartment cover into the slots
provided for this purpose on the
housing of the endoscope
camera.
3. Then press it downwards until
it audibly engages.

PowerFix PEK 2.3 A1
12 - English
Attaching/detaching the gooseneck
Proceed as follows:
To ensure the tightness of the screw connection,
remove any impurities on the rubber ring (a.)
and on the screw thread (b.) with a slightly
damp cloth. To maintain the flexibility of the
rubber ring, you should lubricate it
occasionally, for example, with Vaseline. The
gooseneck can only be attached in one
direction due to the polarity protection feature.
Insert the polarity protection for this purpose
into the slot provided (c.).
The gooseneck can then be screwed on. Turn
the screw connection to the right until it is firmly
secured.
To detach the gooseneck, turn the screw
connection to the left until it is released. The
gooseneck can then be pulled off by exerting a
little force.
Use of the device
Switching the endoscope camera on and off
The endoscope camera is switched on and off by pressing the on/off switch
[3] for approximately 2 seconds. The power indicator [2] lights up green and,
after a short delay, the image is shown on the screen [1].

PowerFix PEK 2.3 A1
English - 13
Lighting
The camera head is equipped with 4 LEDs. This lighting can be switched on
with the camera head illumination button [5]. This button can also be used to
gradually increase the brightness of the LEDs by pressing it several times.
When the highest level is reached and the camera head illumination button [5]
is pressed again, the lighting switches itself off.
Screen brightness
The brightness of the screen can be changed with the brightness adjustment
display button [7]. The brightness of the screen is gradually increased when
this button is pressed several times. When the highest level is reached and the
brightness adjustment display button [7] is pressed again, the brightness
adjustment is reset to the default value.
Changing the display
The camera image can be rotated by 180° and mirrored vertically or
horizontally by pressing the view/rotate image button [4]. This setting enables
you to display four different views of your image. When the device is switched
off, the last setting is retained.
Video-out function
You can use this function, for example, to display the images of the camera on
a TV. Depending on the device on which you want to perform the playback,
you will require a connection cable which must have a 3.5mm jack plug on
one side for connecting to the video-out port [9] of the endoscope camera. The
other connector may vary depending on your playback device. For further
details, please read the user manual for your playback device. A connection
cable is not included in the items supplied with the endoscope camera.
To use the video-out function, proceed as follows:
Switch off the endoscope camera.
Connect the video-out port [9] of the endoscope camera to your playback
device with a suitable connection cable. Note the corresponding user
manual to adjust your playback device correctly.

PowerFix PEK 2.3 A1
14 - English
Switch on the endoscope camera with the on/off switch [3]. The image is
now displayed on both the screen of the endoscope camera and on your
playback device.
Please note that pressing the view/rotate image button [4] and
brightness adjustment display button [7] only affects the screen
display of the endoscope camera. Pressing these buttons is
irrelevant for the display of the playback device in use, for
example, TV.
Screen displays
The following displays are shown on the screen:
a Battery charge level indicator (permanent)
b LED lighting of the camera head (display for approximately 3 seconds
when pressing the camera head illumination button [5]).
c Screen brightness (display for approximately 3 seconds when pressing
the brightness adjustment display button [7]).

PowerFix PEK 2.3 A1
English - 15
Fitting the attachments
The device is supplied with the following attachments/fixtures:
Magnet [D] Hook [E]
Double hook [F] Mirror [G]
Attachment fixture [H]
Place the small barbed hook of the attachment
into the opening provided at the end of the
gooseneck just below the camera head.
Note: The attachment fixture of magnet and double hook attachments must be
slid onto the attachments first due to their size.
Then slide the attachment fixture carefully and
completely over the camera head. Ensure that
the attachment is positioned in the slot provided
in the attachment fixture.

PowerFix PEK 2.3 A1
16 - English
Troubleshooting
The device cannot be switched on
1. Batteries may be empty, replace the batteries.
2. Check whether the batteries are inserted correctly.
No image in the display/distorted images
Check the connection between the gooseneck and hand unit. Remove the
gooseneck and then attach it again as described in the section
"Attaching/detaching the gooseneck".
Cleaning
Clean the device with a dry cloth if soiled, and use a slightly damp cloth to
remove stubborn dirt. Make sure that no major pressure is exerted when
cleaning the display to avoid damaging it. Do not use any solvents, corrosive
or gaseous cleaning agents. Ensure that no moisture penetrates the control
panel.
Environmental and disposal information
When this symbol appears on a product, this indicates that the
product is subject to the European Directive 2012/19/EU. All
electrical and electronic devices must be disposed of separately
from household waste at designated disposal points.
The correct disposal of old devices in this manner will prevent environmental
pollution and human health hazards. For further information about proper
disposal, contact your local authorities, waste disposal office or the shop where
you bought the device.
Remember to protect the environment. Used batteries should not be disposed
of in domestic waste. They must be taken to a collection point for old batteries.

PowerFix PEK 2.3 A1
English - 17
Please note that only discharged batteries may be deposited in collection bins
for portable batteries. Care must be taken to ensure that batteries that are not
fully discharged do not short circuit.
Dispose of the packaging in an environmentally compatible manner.
Cardboard can be put out for municipal paper collections or brought to public
collection points for recycling. Films and plastic used for packaging the device
are collected by your local disposal services and disposed of in an
environmentally compatible manner.
Conformity information
This device meets the basic requirements and other relevant
regulations of the EMC Directive 2004/108/EC as well as the
RoHS Directive 2011/65/EU. The corresponding Declaration of
Conformity can be found at the end of these instructions.
Copyright
All information contained in these instructions is subject to copyright and is
provided for information purposes only. It is only permitted to copy or duplicate
data and information with the express and written consent of the author. This
also includes commercial use of the content and data. The text and illustrations
are based on the state of the art at the time of printing.
Warranty and servicing advice
Warranty of TARGA GmbH
This device is sold with three years warranty from the date of purchase. Please
keep the original receipt in a safe place as proof of purchase. Before using
your product for the first time, please read the enclosed documentation or
online help. Should any problems arise which cannot be solved in this way,
please call our hotline. Please have the article number and, if available, the

PowerFix PEK 2.3 A1
18 - English
serial number to hand for all enquiries. If it is not possible to solve the problem
on the phone, our hotline support staff will initiate further servicing procedures
depending on the fault. Within the warranty period the product will be
repaired or replaced free of charge as we deem appropriate. No new
warranty period commences if the product is repaired or replaced.
Consumables such as batteries, rechargeable batteries and lamps are not
covered by the warranty.
Your statutory rights towards the seller are not affected or restricted by this
warranty.
Service
Phone: 0207 – 36 50 744
E-Mail: [email protected]
Phone: 01 – 242 15 83
E-Mail: [email protected]
Phone: 800 – 62 175
E-Mail: [email protected]
Phone: 800 – 92 496
E-Mail: [email protected]
IAN: 94343
Manufacturer
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY