Powerfix Profi 284621 User manual

PRECISION TOOL HOLDER WITH LED
MAGNIFYING GLASS
SET ZA FINU MEHANIKU
S LED-POVEĆALOM
Upute za posluživanje i za Vašu sigurnost
PRECISION TOOL HOLDER
W ITH LED MAGNIFYING GLASS
Operation and Safety Notes
FEINMECHANIKER-SET
MIT LED-LUPE
Bedienungs- und Sicherheitshinweise
ΣΕΤ ΜΕΓΕΘΥΝΤΙΚΌΣ
ΦΑΚΌΣ LED
Υποδείξεις χειρισμού και ασφαλείας
SET MECANICĂ FINĂ
CU LUPĂ LED
Instrucţiuni de utilizare şi de siguranţă
КОМПЛЕКТ ЗА ФИНА
МЕХАНИКА С LED ЛУПА
Инструкции за обслужване
и безопасност
IAN 284621

GB/CY Operation and Safety Notes Page 5
HR Upute za posluživanje i za Vašu sigurnost Stranica 18
RO Instrucţiuni de utilizare şi de siguranţă Pagina 31
BG Инструкции за обслужване и безопасност Cтраница 44
GR/CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 58
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 72

1 6 7
8
10
13
14
16
3
2 5
9
15
A
17
11
4
12
18
22
23
20 19
B
20

D
C
13
21
24
13
14 14 14

5GB/CY
Introduction........................................................Page 6
Intended use.............................................................Page 6
Description of parts..................................................Page 7
Technical data..........................................................Page 8
Includes.....................................................................Page 8
Safety......................................................................Page 9
General safety information......................................Page 9
Safety instructions for batteries/
rechargeable batteries.............................................Page 10
Before initial use............................................Page 12
Inserting the batteries...............................................Page 12
Attaching the repair device .....................................Page 13
Mounting the magnifying glass...............................Page 13
Placement of the base..............................................Page 13
Use.............................................................................Page 14
Using the product.....................................................Page 14
Changing the batteries ............................................Page 14
Troubleshooting .............................................Page 15
Cleaning and maintenance...................Page 15
Disposal.................................................................Page 16

6 GB/CY
Precision tool holder with
LED magnifying glass
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning safety, use and
disposal. Before using the product, please familiarise yourself
with all of the safety information and instructions for use. Only
use the product as described and for the specified applications.
If you pass the product on to anyone else, please ensure that
you also pass on all the documentation with it.
Intended use
The product is designed for 2.5-/ 5-fold magnification of
objects. The integrated LEDs only serve for better contrast
and shadow-free visualization of the object to be enlarged.
In addition, the product has 2 fixing clamps and a soldering
iron holder. Other uses or changes to the product are consid-
ered to be contrary to the Intended use and may harbour risks
of injury and damage. The manufacturer does not accept any
liability for injury or damage resulting from use of this product
contrary to its Intended use. The product is intended for indoor
use only. The product is not intended for commercial use or
for use in other application.

7GB/CY
Not suitable for ordinary lighting in household
room illumination.
Description of parts
1Precision engineer’s LED magnifying glass
2Lens (magnification 2.5/5 times)
3Battery compartment cover
4Battery compartment
5Ball joint
6Retaining screw (lens ball joint)
7Magnifying glass fixing clamp
8Retaining screw (magnifying glass height adjustment)
9On/off switch
10 Supporting rod (height adjustment)
11 Fixing clamp (repair device)
12 Retaining screw (repair device height adjustment)
13 Soldering iron holder
14 Base
15 Repair device
16 Retaining screw (repair device ball joint)
17 Retaining screw (repair device)
18 Alligator clips
19 Retaining screws (alligator clips)
20 LED lamps (Fig. B)
21 Batteries (Fig. C)
22 Supporting rod (holding Alligator clips)

8 GB/CY
23 Locking screws (tightening Alligator clips)
24 Ribbon (inside battery compartment)
Technical data
Operating voltage: 4.5 volts
Batteries: 3 x 1.5V , AAA type
Max. power rating: 2x 0.06 W
Bulbs: 2x LED (not replaceable)
Magnification/
magnifying glass: 2.5/5 times
Dimensions: approx. 20.5 x 12 x 17 cm (W x H x D)
Chromaticity
coordinate: X < 0.27 or X > 0.530; Y < -2.3172 X
+ 2.3653 X–0.2199 or Y > -2.3172 X
+ 2.3653 X - 0.1595
Includes
Immediately after unpacking please check the package con-
tents for completeness and if all parts and the product are in
good condition. Do not under any circumstances use the
product if the delivery is incomplete.
1 Precision LED Magnifying Glass
3 Batteries, 1.5V , AAA
1 Operating Instructions

9GB/CY
Safety
General safety information
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN
A SAFE PLACE FOR FUTURE REFERENCE!
DANGER OF DEATH
AND ACCIDENTS FOR TODDLERS AND
CHILDREN! Never leave children unsupervised
with the packaging material. The packaging material
represents a danger of suffocation. Children frequently
underestimate the dangers. Always keep children away
from the packaging material. This is not a toy.
This product can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concern-
ing use of the product in a safe way and understand the
hazards involved. Children shall not play with the prod-
uct. Cleaning and user maintenance shall not be made
by children without supervision.
CAUTION! RISK OF INJURY! Please do not use this
product if you find that it is damaged in any way.
Check whether all of the parts are correctly fitted. If the
product is not correctly assembled there is a danger of
injury.
Keep the product away from humidity.

10 GB/CY
CAUTION! RISK OF EYE INJURIES! Never look
through the product into the sun or other sources of light.
Severe eye injuries may be the result.
CAUTION! DANGER OF FIRE!
Never expose the product to direct sun-
light or other sources of light. Never
leave the product unattended. Other-
wise there is a danger of fire resulting
from concentrated rays of light and concentrated heat.
The product must be stored in a dark environment.
Do not subject the product to any extreme temperatures
or severe mechanical stress. Otherwise this may result in
deformation of the product.
Make sure that the lens 2does not come into contact
with sharp or pointed objects. Otherwise this may result
in damage to the product.
Do not leave the soldering gun (separate device) unat-
tended whilst on. The soldering iron holder 13 is only
suitable for holding the soldering iron for a limited time.
Safety instructions for batteries/
rechargeable batteries
DANGER TO LIFE! Keep batteries/ rechargeable bat-
teries out of reach of children. If accidentally swallowed
seek immediate medical attention.
DANGER OF EXPLOSION! Never re-
charge non-rechargeable batteries. Do not
short-circuit batteries/ rechargeable batteries