PR Lighting PRO STAGE PR-3051 User manual

PROSTAGE
PR-3051,3052, 3053, 3054, 3055, 3056
This product manual contains important information about the safe installation and
use of this projector. Please read and follow these instructions carefully and keep
this manual in a safe place for future reference.
PR LIGHTING LTD.
Yingbin Road, Dashi Panyu, Guangzhou, 511430 China
http://www.pr-lighting.com

2/10
Pro Stage manual.doc
TECHNICAL SPECIFICATIONS 3
SAFE USAGE OF THE PROJECTOR 4
INSTALLING THE PROJECTOR 5
FITTING THE LAMP 6
POWER CONNECTIONS 7
KEEPING THE PROJECTOR CLEAN 7
LIGHT OUTPUT 7
Please note that as part of our ongoing commitment to continuous product development, specifications are subject to change
without notice. Whilst every care is taken in the preparation of this manual we reserve the right to change specifications in the
course of product improvement. The publishers cannot be held responsible for the accuracy of the information herein, or any
consequence arising from them.
Every apparatus has been tested completely and packed properly by the manufacturer. Please make sure the packing and / or
the apparatus is in good condition before your installation and use. Should there be any damage caused by transportation,
consult your dealer and do not use the apparatus. But any damage caused by improper use will not be assumed by the
manufacturer and / or dealer.
Safety cord (1 PCS)
This manual (1 PCS)
Colour-filter holder (1 PCS) (Only for 19°, 26°, 36°, 50°projectors)
Gobo with holder (1 PCS)
Optional: Iris device (1 PCS),
Colour-filter holder Iris device Gobo holder Blade
Thank you for purchasing our productsPro Stage, PR-3051, PR-3052, PR-3053, PR-3054, PR-3055,
PR-3056.
This product manual contains important information about the safe installation and use of this
projector. Please read and follow these instructions carefully and keep this manual in a safe place for
future reference.
The Pro Stage is an innovative projector with an elegant housing made from high quality aluminiun-
alloy with an insulating painting finish. The product complies to CE norms and standards.
The unit can be hung easily and safely. The angle of inclination for the projector-body is convenient to
be adjusted, and the lens-barrel can be changed easily. The unit uses high qualified reflector with
special reflective coating which can reduce the heat energe greatly, so the life of the elements in the
projector can be prolonged effectively. Using blades provided you can get various images and using
the filter holder provided you can get different colour effects. The lenses of 5°, 10°, 19°, 26°, 36°, 50°
INDEX
INTRODUCTION
ACCESSORIES

3/10
Pro Stage manual.doc
have been installed in the different barrels, so you can change the barrels directly for your different
applications. The projector is suitable for use in stage, disco, night club or artistic applications.
5° Lens-Barrel PR-3051
10° Lens-Barrel PR-3052
19° Lens-Barrel PR-3053
26° Lens-Barrel PR-3054
36° Lens-Barrel PR-3055
50° Lens-Barrel PR-3056
Power supply: 230V AC 50Hz
Lamp: GKV 600W （Manufacturers Rated Lamp Life:250 hours）
Socket: G9.5
370
190
930
1000
455
360
360
455
200
5°Pro Stage, PR-3051, Net Weight: 8.6kg
720
780
455
190
370
310
310
200
430
10°Pro Stage, PR-3052, Net Weight: 6.8kg
TECHNICAL SPECIFICATIONS

4/10
Pro Stage manual.doc
250
250
200
610
545
455
370
190
19°Pro Stage, PR-3053, Net Weight: 6.8kg
26°Pro Stage, PR-3054, Net Weight: 6.8kg
36°Pro Stage, PR-3055, Net Weight: 6.8kg
50° Pro Stage, PR-3056, Net Weight: 6.8kg
When unpacking and before disposing of the package check there is no transportation damagebefore
using the projector. Should there be any damage caused by transportation, consult your dealer and
do not use the apparatus. Keep the package well for your possible future transportation.
The projector is for indoor use only, IP20. Use only in dry locations. Keep this device away from rain
and moisture, excessive heat, humidity and dust. Do not allow contact with water or any other fluids,
or metallic objects.
The projector is not designed or intended to be mounted directly on to inflammable surfaces.
Hot housing surface! It can reach above 200℃! Do not touch the housing of the projector with your
hand during operation.
The projector is only intended for installation, operation and maintenance by qualified personnel.
The projector must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
Do not project the beam onto inflammable surfaces, minimum distance is 5m. 5m
Avoid direct exposure to the light from the lamp. The light is harmful to the eye.
Do not attempt to dismantle and / or modify the projector in any way.
Electrical connection must only be carried out by qualified personnel.
It is essential that each projector is correctly earthed and that electrical installation conforms to all
relevant standards.
SAFE USAGE OF THE PROJECTOR

5/10
Pro Stage manual.doc
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-
cord come into contact with other cables. Only handle the power-cord by the plug. Never pull out the
plug by tugging the power-cord.
Keep the lamp and lens clean. Do not touch the lamp-glass and lens with bare hand.
Switching the lamp on and off at short intervals will reduce the life of both the lamp and the projector.
Occasional breaks will prolong the life of both the lamp and the projector.
Always replace the lamp if it becomes damaged or deformed.
Always replace the lens if it becomes cracked or badly scratched.
Never run the projector without a lamp and a lens in place.
Always disconnect from the mains, when the device is not in use or before
cleaning it or before attempting any maintenance work.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Fixing Holes
Bracket
Lamp Housing
Locking Knob
Hole for Safety Cable
Passing through
Locking Knob for
Lens-Barrel Holder Rotating
Lens-Barrel
Lens-Barrel
Locking Knob
Blade or Gobo Holder
Retaining Block
for Filter Holder
Lamp Adjustment
Lamp Housing Bolt
Cover Displacing the cover will appear the slot
for inserting the gobo with device
Cover Screw
Lens-Barrel
Holder
This unit has been designed to be hung. Hang the unit via its bracket using M12 size bolt(s). When
you want to adjust the angle of the body of the projector, you only loosen the locking knob and then
adjust the angle of the body. You can change the lens-barrel by loosening 2 lens-barrel locking knobs
and rotate the lens-barre by loosening 2 lens-barrel holder rotating knobs. Always ensure that the
projector is firmly positioned to avoid vibration and slipping, and always ensure that the structure to
which you are attaching the projector is secure and is able to support the weight of each Pro Stage.
For safety the unit should have a secondary fixing with a safety cable through the hole on the upper of
the unit.
INSTALLING THE PROJECTOR

6/10
Pro Stage manual.doc
Important: Before installation the GKV lamp verify that the GKV lamp you use is suitable for the
voltage at your facility. Operating lamps beyond their rated voltage reduces lamp life and can cause
premature lamp failure.
First, loosen the lamp housing bolt and pull the housing straight out from the back of the fixture as
shown above.
Holding the lamp with the base push down on the lamp base until the lamp is firmly seated. Make sure
that the lamp is fully seated, with the bottom of the lamp heat sink flush to the lamp housing casting.
To reinstall the lamp housing, center it on the reflector and the bolt hole, then tighten the lamp
housingbolt to secure the lamp housing in place.
NOTE: To optimize light output it will be necessary to adjust the lamp adjustment. Adjust the lamp in
or out to get a proper focus via rotating the lamp adjustment by hand.
FITTING THE LAMP
Lamp Adjustment
Lamp Housing Bolt Lamp Housing
Lamp

7/10
Pro Stage manual.doc
The unit is supplied with a power cord. Should any other connections be required they must be carried
out with the following configuration: Earth = Green/Yellow cord.
To ensure the reliability of the projector it should be kept clean. The lens and reflector should be
regularly cleaned to maintain an optimum light output.
Do NOT use any glass cleaner or any type of solvent on the reflector. Before cleaning the
reflector remove the lens barrel and the barrel holder so you can access the reflector from the front of
the fixture. When cleaning the reflector use a damp, clean, soft, lint-free cotton cloth with amild, soapy
water solution and gently wipe the reflector, and then remove any soapy water residue with a clean,
soft, lint-free cotton cloth dampened with water. Do not use paper towels or harsh materials to
wipe the reflector.
Cleaning frequency depends on the environment in which the fixture operates: damp, smoke or
particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics. It is
recommended to clean the lens at least once every 20 days and clean the reflector at least once
every 30 / 60 days.
Do not use any organic solvent, e.g. alcohol, to clean the housing of the
projector.
4m
2.1
1.7
1.30.9
0.4
0
DIAMETER (m)
3m
6m
4m 5m
DISTANCE (m) 1005
2m 1m
3m
2m 1m
0m
20 2515
6m 5m
9295 lux37183 lux 1487 lux2323 lux4130 lux
5°
5° Pro Stage, PR-3051
KEEPING THE PROJECTOR CLEAN
POWER CONNECTIONS
LIGHT OUTPUT

8/10
Pro Stage manual.doc
3m
4m 5m
6m
5 10
0.9
0
01.7
1m
2m
3m
1m
2m
0m
4.4
2515 20
2.6 3.5
5m
4m
6m
22431 lux 5607 lux 896 lux2492 lux 1400 lux
DISTANCE (m)
DIAMETER (m)
10°
10° Pro Stage, PR-3052
2m
6m 5m
5 10
1.7
0
03.3
0m
3m
1m
2m
4m
1m
8.4
2515 20
5.0 6.7
4524 lux 1128 lux
5m
4m
6m
3m
180 lux500 lux 282 lux
DIAMETER (m)
DISTANCE (m)
19°
19° Pro Stage, PR-3053
168 lux
25
11.5
1m
3m
5m
1m
6m
0m
2m
4m
4.6
510
2.3
0
0
15 20
6.9 9.2
5m
3m
4m
6m
2m
1074 lux4296 lux 476 lux 267 lux
DIAMETER (m)
DISTANCE (m)
26°
26° Pro Stage, PR-3054

9/10
Pro Stage manual.doc
3m
4m
20151050 6.493.24
09.74 13
1m
1m
4m
8m
6m
2m
0m
2m
7m
5m
3m
8m
6m
253 lux 140 lux2280 lux 570 lux
7m
5m
25
16.2
91 lux
DISTANCE (m)
DIAMETER (m)
10m 9m
10m 9m
36°
36° Pro Stage, PR-3055
14m
105
4.66
0
0
2015
13.9 18.69.32
0m
13m
11m
8m
14m
12m
10m
6m
4m
2m
9m
5m
3m
7m
1m
2m
4m
6m
12m
10m
8m 7m
1m
5m
3m
13m
11m
9m
504 lux2035 lux 224 lux 127 lux
25
23.3
81 lux
DISTANCE (m)
DIAMETER (m)
50°
50° Pro Stage, PR-3056

10/10
Pro Stage manual.doc
PR LIGHTING LTD.
Add: Yingbin Road, Dashi, Panyu, Guangzhou, China
Post-Code：511430
TEL：[phone]
FAX：[phone]
P/N: 321010066
Last Revision: 27:11:2004