Prepac DNH-0339-1 User manual

CONTACT US FIRST
[email protected]
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
For help with assembly
If you have received a damaged or defective
part or are missing hardware.
We will process replacement parts in 2 business
days or less.Parts are shipped via UPS Ground or
mail.
Before you call please:
1) Record the following information from the
shipping label on the outside of the box.
You will need it for warranty purposes:
Ship To Name
Sales Order Number
2) Note the product model number.
3) Review the contents of your shipment to
determine what you are missing.
•
•
3-drawer Nightstand
Model # DNH-0339-1
Online Option
Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com
Assembly Instructions
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0703
2012-06-18
DATE STAMP
This product is shipped in
1 carton
Required Tools Optional Tools
Using a power screwdriver will
speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by
hand.

Page 2 of 16
24mm Green
Twister Dowel (12)
Goujon de torsion vert
RM-0501
15mm Zinc Cam (large)
(12)
Ferrure en zinc grand
RM-0103
#8 - 1½” Screws (12)
Vis no.8 - 1½ po.
RM-0504
Euro Screw (48)
Vis “Euro”
RM-0074
¾” Nail (24)
Clou ¾”
RM-0022
34mm Black
Twister Dowel (10)
Goujon de torsion noir
RM-0500
12mm Zinc Cam
(small) (10)
Ferrure en zinc 12mm
(petit)
RM-0502
Wood Dowel (4)
Goujons de bois
RM-0069
Black Spacers (12)
Entretoise noire
RM-0822
Oval Knob (3)
Bouton oval
RM-0821
Plastic Dowel (2)
Goujon en plastique
RM-0072
#6 - ¾” Screws (6)
Vis no.6 - ¾ po.
RM-0471
1 RIGHT Drawer Slide per Drawer (Total = 3)
1 Glissière DROITE de tiroir par tiroir (total = 3)
RM-0469
1 LEFT Drawer Slide per Drawer (Total = 3)
1 Glissière GAUCHE de tiroir par tiroir (total = 3)
RM-0469
1 LEFT Cabinet Slide per Drawer (Total = 3)
Glissière GAUCHE De Cabinet (total = 3)
RM-0469
1 RIGHT Cabinet Slide per Drawer (Total = 3)
Glissière DROITE De Cabinet (total = 3)
RM-0469
Hardware Identification Identification de quincaillerie
Note: You may have extra hardware
after assembly
Note : Vous pouvez avoir le matériel
supplémentaire après assemblée

Page 3 of 16
Nightstand Parts Pièces de la table de nuit
Top (1)
Dessus
TP-10011-B black / noir
Top Moulding (1)
Moulure supérieure
TR-10008-B black / noir
Left Side (1)
Côté gauche
SL-10035-B black / noir
Right Side (1)
Côté droit
SR-10035-B black / noir
Side Moulding (2)
Moulure latérale
TR-10009-B black / noir
Rear Stabilizer (1)
Renforcement arriere
ST-10017
Front Stabilizer (1)
Renforcement avant
KR-10034-B black / noir
Backer (1)
Dos
BB-10008
C3C1 C4C2
C6
C5
C5
C7
C4
C6
C1
C3
C2
C7
C5
C8
C8

Page 4 of 16
Step 1 Estimated Time: 5 Minutes
1a
1b
Attach black spacers to left (C3) and right (C4)
sides with Euro screws
Attachez les entretoises noires aux côtés
gauche (C3) et droit (C4) avec vis Euro
Screw green twister dowels and wooden dowels into the left
(C3) and right sides (C4) where shown
Vissez les goujons de torison vert et les goujons de bois aux
côtés gauche (C3) et droit (C4)
Euro Screw
Vis “Euro”
Green Twister Dowel
Goujon de torsion vert
Wood Dowel
Goujons de bois
C3
C4

Page 5 of 16
Step 2 Estimated Time: 10 Minutes
Attach metal cabinet slides to black spacers on left (C3) and right (C4) sides with Euro screws
Attachez les glissières de coffret en métal aux côtés gauche (C3) et droit (C4) en utilisent les vis “Euro”
Position glide with wheel to the
front and the bottom
Placez le glissement avec la
roue à l’avant et au fond
Front
Devant
Front
Devant
Euro Screw
Vis “Euro”
C3
C4