Prepac EMC-5022 User manual

Cubbie Bench
Required Tools
Screwdrivers
Flat Head
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
Phillips Head
Optional Tools
DATE STAMP
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0614
2007-06-25
Online Option:
Fill out the Parts Order Form on our website.
Go to www.prepacmfg.com and choose
Parts Order from the Support menu
Model #
EMC-5022
E-5022-EVE
Assembly Instructions for
Manhattan Collection
Everett Collection
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
•For help with assembly
•If you have received a damaged or defective part or
are missing hardware.
We will process replacement parts
UPS Ground or mail.
Before you call please:
2) Note the
3) Review the contents of your shipment to determine
what you are missing. This unit is shipped in 2
cartons. Make sure you have received both.
in 2 business days or
less. Parts are shipped via
1) Record the following information from the shipping
label on the outside of the box. You will need it for
warranty purposes:
•Ship To Name
•Sales Order Number
product model number.
Hammer
This product is shipped in
1 carton
1 of 1

¾” Nail
(26)*
RM-0022
*More than required
15mm Zinc Cam
(16)
RM-0103
Plastic Dowels
(4)
RM-0072
Green Twister Dowel
(20)
RM-0501
2" Confirmat Screws
(4)
RM-0001
Hardware Identification
12mm Zinc Cam
(8)
RM-0502
Blue Rapid Rod
(4)
RM-0583
Profiled Top (1)
TP-4617
Right Side (1)
SR-4617
Left Side (1)
SL-4617
Bottom (1)
BT-4617
Solid Wood Top
Stabilizer (1)
ST-4618
C1
C8
C2
MDF
Backer (1)
BB-4617
C4
Cabinet Parts C1
C2
C4
Solid Wood Leg
Left Front (1)
LW-4617-L
Right Rear (1)
Solid Wood Leg
Right Front (1)
LW-4617-R
Left Rear (1)
Bottom
Stabilizer (1)
ST-4617
C3 C3
Center Gables (2)
GA-4617
C3
C5
C5
C6
C6 C7
C7
C8
C9 C10 C9
C9
C10
C7
C8
Page 2 of 8

STEP 1 Estimated Time: 3 minutes
Insert large cams into holes on left and right sides
Insert large cams into holes on underside of shelf
Make sure arrow on
cam faces hole for
connecting bolt
Left
Side
Right
Side
STEP 2 Estimated Time: 3 minutes
STEP 3 Estimated Time: 3 minutes
Insert 8 small cams into both stabilizers*
*For solid wood stailizers (front), insert cams deeply into the holes
C5
C6
Solid Wood Top Stabilizer
Composite Wood Bottom Stabilizer
Page 3 of 8

STEP 4 Estimated Time: 5-10 minutes
Attach legs to each side and lock cams using a flat head screwdriver
Left Side
Screw green twister dowels into the side and rear of each leg
STEP 5 Estimated Time: 5 minutes
Unlocked Locked
Turn 210°
Right Side
Front
Rear
Front Legs Rear Legs
Rear
Front
Page 4 of 8

STEP 6 Estimated Time: 5 minutes
Insert green twister dowels into the two holes at the front of the left and right sides
6a
Left Side
FRONT
6a
Insert blue rapid rods into the two remaining holes on the left and right sides
6b
FRONT
Right Side
6b
STEP 7 Estimated Time: 5 minutes
Lay top and bottom stabilizers on the floor
7a
7b Attach solid wood top stabilizer (C5) to the front leg of the
left side and tighten cams with a flathead screwdriver
C5
C6
Left Side
FRONT
7c Attach composite wood bottom stabilizer (C6) to the front of
the left side and tighten cams with a flathead screwdriver
Locked
Turn 210°
Unlocked
Page 5 of 8

STEP 8 Estimated Time: 5 minutes
Attach bottom (C9) to the left side and tighten cams with a flathead screwdriver
C9
Unlocked Locked
Turn 210°
STEP 9 Estimated Time: 5 minutes
Attach right side bottom and stabilizers and tighten cams with a flathead screwdriver
Page 6 of 8

Confirmat Screws
STEP 10 Estimated Time: 5 minutes
Attach center gables (C3) to the bottom with Confirmat screws
C3 C3
STEP 11 Estimated Time: 5 minutes
11a Screw 4 green twister dowels into underside of top as shown
Hammer plastic dowels halfway
into the center holes on the
underside of the top
11b
11a
11a
11c Attach top and tighten cams on left and right sides
Unlocked Locked
Turn 210°
Page 7 of 8

CALL US
1-877-PREPAC1 (1-877-773-7221)
Mon - Fri 7am - 4pm PST
10am - 7pm EST
Email Us:
[email protected]
Q. How do I clean your products?
A. We recommend that you simply wipe your products with a clean,
damp cloth and then dry immediately with another clean cloth to
maximize the life span and look of your unit
Q. Can I paint or varnish your products?
A. Our products are made from durable composite woods with a
laminate finish and therefore should not be painted or varnished.
Q. Are they waterproof?
A. NO. If liquid is spilled and quickly wiped up, no damage will be
done to your product. However, continuous exposure to liquids
or high humidity may cause damage to the board.
Give Us
Your Feedback
Furniture Care Q&A
Nail backer to top and sides as shown.
STEP 12 Estimated Time: 5 minutes
Attach to
the top and
sides only
Page 8 of 8