Prepac Queen User manual

Queen
Platform Storage Bed
Required Tools
Screwdrivers
Flat Head
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
Phillips Head
Optional Tools
DATE STAMP
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0625-R
2010-04-22
Model # BQ-6200-3K
Assembly Instructions
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
•For help with assembly
•If you have received a damaged or
defective part or are missing hardware.
We will process replacement parts
UPS Ground or mail.
Before you call please:
2) Note the
3) Review the contents of your shipment to
determine what you are missing. This unit
is shipped in 3 cartons. Make sure you
have received all cartons.
in 2
business days or less. Parts are shipped via
1) Record the following information from the
shipping label on the outside of the box.
You will need it for warranty purposes:
•Ship To Name
•Sales Order Number
product model number.
Hammer
This product is shipped in
3 cartons
Make sure you have all cartons.
Sometimes cartons shipped on the same
day get separated and are delivered on
different days.
1 of 3
+
2 of 3 3 of 3
+
Online Option:
Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com

RIGHT Slide (6)
1 LEFT Drawer Slide per Drawer (Total = 6)
1 RIGHT Drawer Slide per Drawer (Total = 6)
Hardware Identification
LEFT Slide (6)
Drawer Slide Screw
(48)
RM-0074
¾” Nail
(30)
RM-0022
#8 - 1½” Hi Lo Screws
(24)
RM-0504
4 per drawer
T Spacer
(24)
RM-0628
Drawer Slide Screw
(90)
RM-0074
Bed Hardware
Drawer Hardware
Page 2 of 20
JRN Nut
(24)
RM-0312
JCB Connector
(24)
RM-0310 bronze (cherry / espresso)
RM-0311 chrome (white / maple)
RM-0314 black
8 per drawer
Drawer Slides for Bed
Allen Key
(1)
RM-0313
5 per drawer
12mm Zinc Cam
(24)
RM-0715
34mm Black Twister Dowel
(24)
RM-0500

Bed Parts
Page 3 of 20
B3 B5
B4
B2
B1 B6
Outer Gables (2)
GA-4720 maple
GA-4120 black
GA-4920 cherry
GA-4620 espresso
GA-4020 white
Inner Gables (2)
GA-4108 black
GA-4908 cherry
GA-4608 espresso
GA-4708 maple
GA-4008 white
Upper Stabilizer
ST-4720 maple
(2)
ST-4120 black
ST-4920 cherry
ST-4620 espresso
ST-4020 white
Lower Stabilizer
ST-4721 maple
(2)
ST-4121 black
ST-4921 cherry
ST-4621 espresso
ST-4021 white
Plywood Slats (9)
BF-2000-PW
Metal U-channel with
Blocks (2)
BF-3000-C
B1
B1
B2
B2
B3
B3
B4
B4
B5
B5
B6

Attach metal U-channels to each outer
gable using drawer slide screws
Drawer
Slide
Screw
Attach T spacers to outer gables with drawer slide screws.
STEP 2 Estimated Time: 15 minutes
Drawer
Slide
Screw
B1
B1
STEP 1 Estimated Time: 10 minutes
Page 4 of 20

Page 5 of 20
Attach drawer glides to T-spacers on
outer gables as shown in the photo
Position the Drawer Glides with:
A) The wheel at the finished side
B) The wheel on the unfinished bottom
Finished
Side
Bottom
STEP 3 Estimated Time: 10 minutes
Use 1st hole
Use 14th hole
Use 1st hole Use 14th hole

Page 6 of 20
STEP 4 Estimated Time: 5 minutes
Insert JRN nuts into the holes on each end of the inner gables.
The holes are drilled through. You can insert them from either side.
B2
B2
Insert the nut as shown, so that the
hole lines up with the hole on the
edge of the gable.

Page 7 of 20
B3
STEP 5 Estimated Time: 5 minutes
Insert JRN nuts into the holes on each end
of the upper (B3) and lower (B4) stabilizers.
B4
Identifying the upper and
lower stabilizers
Upper Stabilizers
Lower Stabilizers
Lower Stabilizers
Side hole is close to
the finished edge
Upper Stabilizers
Side hole is
close to the
UNFINISHED
edge
Top edge
(FINISHED) is
rounded

Page 8 of 20
STEP 6 Estimated Time: 10 minutes
Attach “T” spacers to ONE side of each
inner gable with drawer slide screws
6b
IMPORTANT:
Before attaching the drawer glides, determine the
TOP and BOTTOM of each inner gable.
Check the position of the drawer glides carefully
before you attach them to the inner gables.
A. Measure from each edge of the “T” Spacer to
each unfinished edge.
B. The measurement that is approximately 4” will
be the BOTTOM.
6c Repeat steps 6a & 6b for the 2nd side
of the inner gables.
INCORRECT
CORRECT
Wheel is on the bottom and
toward finished edge
Finished
Edge
Bottom
Top
4”
Unfinished Edge
4”
Attach “T” spacers and drawer glides to Inner Gables
6a Drawer Slide
Screw
Attach drawer glides to “T” spacers on
inner gables.
Position the drawer glides with:
A) The wheel at the finished edge
B) The wheel on the bottom
Drawer
Slide
Screw
Bottom
4”

Page 9 of 20
STEP 7 Estimated Time: 5 minutes
Using JCB connectors, and the Allen Key provided, attach
each lower stabilizer (B4), one at a time, to both inner gables
Identifying the Lower Stabilizer
The screw hole is at the top, close to the finished edge
B4
B4
IMPORTANT
Finished edge
If you have any difficulty tightening the JCB connector,
use a screwdriver to adjust the JRN nut to make sure
the hole is facing the opening for the connector
JCB
Connector JRN
Nut

Page 10 of 20
STEP 8 Estimated Time: 5 minutes
Using JCB connectors, attach each upper stabilizer (B3), one at
a time, to both inner gables.
B3
B3
Upper Stabilizer
The screw hole is closest
to the lower, unfinished
edge
Top edge (FINISHED)
is rounded

Page 11 of 20
STEP 8 Estimated Time: 10 minutes
Attach one outer gable (B1) to stabilizers with JCB connectors
B1

Page 12 of 20
Spread the wooden slats out across the inner stabilizers
STEP 9 Estimated Time: 5 minutes
9a
9b Slide the slats into the wide spaces of the metal U-channel (B6) on one outer gable.
9b
B6
Slide

Page 13 of 20
Attach second outer gable to stabilizers with JCB connectors
STEP 10 Estimated Time: 10 minutes
Secure the gable in place with connectors, but don’t
fully tighten
10a
10b Ensure the slats are set inside the u-channel and that
they haven’t pulled out of the first outer gable.
10c Firmly tighten the connectors

Drawer Parts Identification
D4
D3
D2
D2
Drawer Front (6)
DF-4601 espresso
DF-4701 maple
DF-4101 black
DF-4901 cherry
DF-4001 white
Left Drawer Side (6)
DS-0415W-L
Plywood
Drawer Back (6)
DK-4100W
unfinished
Right Drawer Side (6)
DS-0415W-R
Plywood
Drawer Bottom (6)
DB-4100
unfinished
D5
D1 D4
D3
D5
Page 14 of 20
D1

Par s if ca ioCabinet t Ident itn
STEP 11 Estimated Time: 5 minutes PER DRAWER
Insert cams into drawer sides
Screw green twister dowels into drawer fronts
11a
11b
D3
D2
D1
Left Drawer Side Right Drawer Side
Make sure arrow
faces toward hole for
twister dowel
Page 15 of 20
ONLINE
HELP
To see a video showing how the cam and connectors
work, or how to attach drawer glides, visit our website:
www.prepacmfg.com/support/assemblyvideos.html

Page 16 of 20
1½” Hi Lo Screws
P r s f a oCabinet a tIdenti ic ti n
11c
Attach drawer sides to drawer back with 1½” Hi Lo screws
11d
Attach drawer front and tighten cams
using a flat head screwdriver
Right Drawer Side
Locked
Turn 210°
Unlocked
Left Drawer Side
Unlocked Locked
Turn 210°

Page 17 of 20
11e
Turn drawer upside down and slide drawer bottom into grooves
11f
Secure the drawer bottom to the drawer back with nails
Use 5 nails
per drawer
C

11g
Attach drawer slides to left and right drawer sides using drawer slide screws
Right Drawer Side
Left Drawer Side
Page 18 of 20
Drawer
Slide
Screws
Drawer
Slide
Screws

STEP 12 Estimated Time: 2 minutes
Page 19 of 20
Note: When drawers are installed correctly, you will not be able to
remove them without first lifting up the drawer front.
Insert drawers

CALL US
1-877-PREPAC1 (1-877-773-7221)
Mon - Fri 7am - 4pm PST
10am - 7pm EST
Email Us: [email protected]
Q. How do I clean your products?
A. We recommend that you simply wipe your products with a clean, damp cloth and then dry
immediately with another clean cloth to maximize the life span and look of your unit
Q. Can I paint or varnish your products?
A. Our products are made from durable composite woods with a laminate finish and therefore
should not be painted or varnished.
Q. Are they waterproof?
A. NO. If liquid is spilled and quickly wiped up, no damage will be done to your product.
However, continuous exposure to liquids or high humidity may cause damage to the board.
Give Us Your Feedback
Furniture Care Q&A
Page 20 of 20
Thanks!