Prepac SH-6656 User manual

Tall Double / Queen
Headboard
Required Tools
Screwdrivers
Flat Head
Using a power screwdriver
will speed up assembly.
Caution
Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.
Phillips Head
Optional Tools
DATE STAMP
Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4
LB-0634
2010-04-21
Online Option:
Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com
Model # SH-6656
Assembly Instructions
CALL US FIRST
1-877-PREPAC1
1-877-773-7221
Mon - Fri 7am - 4pm PST
10am - 7pm EST
•For help with assembly
•If you have received a damaged or defective part or
are missing hardware.
We will process replacement parts
UPS Ground or mail.
Before you call please:
2) Note the
3) Review the contents of your shipment to determine
what you are missing.
in 2 business days or
less. Parts are shipped via
1) Record the following information from the shipping
label on the outside of the box. You will need it for
warranty purposes:
•Ship To Name
•Sales Order Number
product model number.
Hammer
This product is shipped in
1 carton
1 of 1

¾” Nail (40)
RM-0022
15mm Zinc Cam
(24)
RM-0103
Levelling Feet (4)
RM-0139
Green Twister
Dowel (20)
RM-0501
2" Confirmat Screws
(20)
RM-0001
Hardware Identification
Page 2 of 16
Plastic Dowels (8)
RM-0072
#8 - 9/16" Washerhead
Screws (4)
RM-0521
Safety Bracket (2)
RM-0515
Headboard Parts
Left Side (1)
SL-4120 Black
SL-4920 Cherry
SL-4620 Espresso
Top (1)
TP-4121 Black
TP-4921 Cherry
TP-4621 Espresso
Top Molding (1)
TR-4121 Black
TR-4921 Cherry
TR-4621 Espresso
Left Gable (1)
GA-4124-L Black
GA-4924-L Cherry
GA-4624-L Espresso
Right Gable (1)
GA-4124-R Black
GA-4924-R Cherry
GA-4624-R Espresso
Inner Fixed Shelf (1)
SH-4125 Black
SH-4925 Cherry
SH-4625 Espresso
Outer Fixed Shelf (2)
SH-4124 Black
SH-4924 Cherry
SH-4624 Espresso
Inner Gable (2)
GA-4125 Black
GA-4925 Cherry
GA-4625 Espresso
Large Stabilizer (1)
ST-4125 Black
ST-4925 Cherry
ST-4625 Espresso
Right Side (1)
SR-4120 Black
SR-4920 Cherry
SR-4620 Espresso
Folded Backer (1)
BB- 4121 Black
BB-4921 Cherry
BB-4621 Espresso
C1
C8
C3
C6
C7
C2
C9
C5
C4
C10
C11
Left Small Stabilizer (1)
ST-0715-L Black
ST-0795-L Cherry
ST-0765-L Espresso
Right Small Stabilizer (1)
ST-0715-R Black
ST-0795-R Cherry
ST-0765-R Espresso
C13
C12
C1
C8
C3 C6 C7
C2
C9
C5
C4
C11
C10
C13
C12
C9
C14
Long Fixed Shelf (1)
SH-4123 Black
SH-4923 Cherry
SH-4623 Espresso
C14
Screw Cover Caps
(14)
RM-0226 black
RM-0620 cherry
RM-0304 espresso
Double End
Connecting Rod (2)
RM-0567
Wood Dowel (2)
RM-0069

Page 3 of 16
STEP 1
Insert cams into all pieces
Estimated Time: 5 minutes
1a
1b
Lie stabilizers and large fixed shelf on the floor
Finished Edge
(Front)
Large Fixed
Shelf
NOTE: Shaded areas represent the
UNFINISHED side of the piece.
Left Small
Stabilizer
Right Small
Stabilizer
Large Stabilizer
C11
C13
C12
C14
FRONT

Page 4 of 16
Insert double ended connecting rods into the large stabilizer (C12) and tighten cam.
2a
2b
Slide the left small stabilizer (C13) onto the other end of the double ended connecting rod and tighten the cam.
2c
Repeat for the right small stabilizer (C14).
STEP 2 Estimated Time: 5 minutes
Unlocked Locked
Turn 210°
Tightening Cams
Large Stabilizer
Left Small
Stabilizer
Right Small
Stabilizer
2a
2b
2d
C12
C14
C13
2d
Insert wooden dowels into the large stabilizer (C12).
2c
Double End
Connecting Rod
Wood Dowel

Page 5 of 16
STEP 3
Insert cams into holes on the top of the left
and right gables and left and right sides
Estimated Time: 5 minutes
3a
3b Insert green twister dowels into remaining
holes on the left and right sides
Right Side
Left Side
Left
Gable
Right
Gable

Page 6 of 16
STEP 4 Estimated Time: 5 minutes
Attach ONE SIDE ONLY to both stabilizers and to the fixed shelf. Tighten cams
slightly. Make sure the stabilzers and shelf are positioned squarely with the side.
Fully tighten cams using a flathead screwdriver.
Position the large fixed shelf as shown with the finished edge on the floor.
Left
Side
Fixed Shelf
Finished Edge
(Front)
Unlocked Locked
Turn 210°
Tightening Cams
4a
4b
FRONT

Page 7 of 16
STEP 5 Estimated Time: 5 minutes
Repeat to attach the 2nd side. Make sure the pieces are square
Unlocked Locked
Turn 210°
Tightening Cams

Page 8 of 16
STEP 6 Estimated Time: 5 minutes
Hammer levelling feet to the
bottom of each side.
Attach “L” brackets with Washerhead Screws to
secure large stabilizer to fixed shelf
6a
6b
OR
#8 - 9/16"
Washerhead Screws
Large Stabilizer
Fixed Shelf

Page 9 of 16
STEP 7 Estimated Time: 10 minutes
Attach the two inner gables to the inner fixed shelf (C6) with
Confirmat screws. Add screw cover caps to finish.
7a
FRONT
Make sure all
Finished Edges
are facing the UP
Attach inner fixed shelf to left (C4) and right (C7) gables with Confirmat
screws. Add screw cover caps to finish.
7b
C6
C5
Assemble Center Shelf Section:
C5
C6
C7
C4

Page 10 of 16
STEP 8 Estimated Time: 5 minutes
Attach the center shelf assembly to the large fixed shelf with Confirmat screws.

Page 11 of 16
STEP 9 Estimated Time: 5 minutes
Attach outer fixed shelves with Confirmat screws as shown. Finish with screw cover caps.
C9
C9

Page 12 of 16
Position the front molding in place
and press down firmly to secure.
Screw green twister dowels into remaining holes on the top
STEP 10 Estimated Time: 10 minutes
GENTLY hammer plastic dowels HALFWAY into the following
holes on the underside of the top:
•The 4 holes along the front to attach top molding
•The 4 holes in the center of the top to attach to inner gables
10a
10b
10c
Back

Par s if ca ioCabinet t Ident itn
STEP 11 Estimated Time: 5 minutes
Lower top and gables onto left and right
sides and tighten cams
Unlocked Locked
Turn 210°
Tightening Cams
Page 13 of 16

Page 14 of 16
Par s if ca ioCabinet t Ident itn
Estimated Time: 5 minutes
Par s if ca ioCabinet t Ident itn
STEP 12 Estimated Time: 5 minutes
Attach Backer with nails
Position nails in the center of
the board
C
C

Page 15 of 16
Par s if ca ioCabinet t Ident itn Par s if ca ioCabinet t Ident itn
Estimated Time: 5 minutes
STEP 13
Move headboard into desired location and
position either Double / Full or Queen bed
against headboard.
NOTE: if moving headboard in a carpeted
room, lift headboard (with 2 people). Do
Not Drag.

Page 16 of 16
CALL US
1-877-PREPAC1 (1-877-773-7221)
Mon - Fri 7am - 4pm PST
10am - 7pm EST
Email Us: [email protected]
Q. How do I clean your products?
A. We recommend that you simply wipe your products with a clean, damp cloth and then dry immediately with
another clean cloth to maximize the life span and look of your unit
Q. Can I paint or varnish your products?
A. Our products are made from durable composite woods with a laminate finish and therefore should not be
painted or varnished.
Q. Are they waterproof?
A. NO. If liquid is spilled and quickly wiped up, no damage will be done to your product. However, continuous
exposure to liquids or high humidity may cause damage to the board.
Give Us Your Feedback
Furniture Care Q&A
Thanks!