Prevue Pet Products 1804TR User manual

Triple Roof
Flight Cage
Model: # 1804TR
read first REVIEW BEFORE ASSEMBLY
• TOOLS: No ools are required. For assis ance or replacemen
par s, please con ac Prevue
TOLL-FREE 800.243.3624
ONLINE www.prevuepe .com
step 1PARTS USED:
step 2PARTS USED:
step 3
1804TR— 10/14— A4 Made in China or Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 800 243-3624 [e-mail]
Removable tray will
already be in the base.
Place rille into base
before addin mesh.
Unfold the ca e mesh unit
so that the corners make
90° ri ht an les.
Place the ca e body into the
base. Startin at one end,
ali n the loops on the mesh
with openin s in the base.
Guide the mesh in place
between the ed e and the
tabs alon the inner rim
of the base.
Finish with puttin the
loops into base openin s on
the opposite end.
Insert two
short perches
as illustrated. Insert two
lon perches as
illustrated.
Assemble and insert two
food/water cups as illustrated.

1804TR— 10/14— A4 Made in China or Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 800 243-3624 [e-mail]
step 4PARTS USED:
step 5PARTS USED:
*CLEANING INSTRUCTIONS
Prolon the life of your Prevue ca e
with these recommendations:
→When cleanin the ca e and parts,
use a soft cloth or Teflon-resistant
scrubber (such as Prevue’s Cage Saver
non-abrasive scrub pad (#109)).
→Wash all parts with warm water
and a mild environmentally-friendly,
pet-friendly soap.
→Rinse thorou hly.
→Hand dry all parts completely
with a soft dry cotton cloth before
reassemblin the ca e.
→Do not leave plastic parts to dry
in the sun as they may warp.
Finish by installin the
two peaked roofs.
There are two loops on
each top inside and
outside rail of the ca e
body.
For each peaked roof
unit, hook the second
horizontal wire onto
the loops of the ca e
mesh—start with
inside loops first, then
move to outside loops.
Install the roof, startin
with the middle arch.
There are two loops on
each bottom rail of
the arched roof unit.
There is one loop at the
peak of the body mesh,
in front and back.
Flex the arched roof
so that the lower loops
catch underneath the
short vertical panels on
the ca e body.
Catch the arched roof
at the top onto the loops
of the ca e body, front
and back.