Prevue Pet Products Catville LOFT Instruction sheet

7220/7221— 07/15 — USL Ma e in China for Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 800 243-3624 [e-mail]
Catville™LOFT
Model: #7220 (Leopard) / #7221 (Gray)
read first REVIEW BEFORE ASSEMBLY
• Designed for hand assembly.
No tools required.
•Check regularly to ensure all
components are connected.
• Place finished unit in an area
with room for cats to play and
interact with all features.
For assistance or replacement
parts, please contact Prevue Pet
Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [email protected]
very helpful tips
• Loosely lay out all parts for each step.
• Sli e tubes into fabric sleeves first—then a connectors.
• Use appropriate force when assembling connectors an tubes
to avoi unnecessary amage.
connectors & parts
4 C
(6pcs)
3 C
(4pcs)
3 S
(6pcs)
A35
Lon Tube
(12pcs)
A16
Short Tube
(6pcs)
M1
Plush Mat
(1pcs)
L2
Hideaway
with Ramp
(1pcs)
B40
Lon Curved Tube
(2pcs)
B31
Curved Tube
(6pcs)
A1
Sisal Post
(1pcs)
R2
Hideaway
Arch
(1pcs)
3 C
3 S
3 S
3 S
3 C
3 S
3 C
C
3 C
After the base has been
assembled and firmly
ti htened, add the vertical
tubes and Sisal post.
1
PARTS NAME QTY
S3- ay Straight ( 4 )
3 C 3- ay Corner ( 4 )
A35 Long Tube ( 5 )
A16 Short Tube ( 4 )
To form the BASE, you will
need the e piece :
To fini h the ba e, you will
need the e piece :
PARTS NAME QTY
A35 Long Tube ( 1 )
A16 Short Tube ( 2 )
A1 Sisal Post ( 1 )
Lay out the components on the
floor, then be in to assemble,
insertin posts into connectors
to form the base.

7220/7221— 07/15 — USL For more won erful cages, toys, an accessories for ogs, cats, bir s, chickens, rabbits, ferrets an small animals, visit www.prevuepet.com
CARE INSTRUCTIONS
• Do not immerse in water or place
near hi h heat or open flame.
• Re ularly check the stability of
all connections of components.
• Spot clean fabric and frame with
a moist towel. Allow to air dry
thorou hly.
• Supervise pet interaction with the
product. Inspect for wear. Replace
when worn.
4 C
4 C
4 C
4 C
4 C
4 C
3 S
B40
B31
B40
3 S
B 3 1
Orient the B40 curve tubes
vertically. The lon er portion
will create the hei ht of the
hideaway openin .
After the hideaway
has been assembled
and firmly ti htened,
add it to the base.
After the hideaway arch
has been assembled,
add it to the lower
hideaway, and insert
the plush mat.
2
PARTS NAME QTY
4C 4- ay Corner ( 6 )
A35 Long Tube ( 5 )
B31 Curved Tube ( 4 )
L2 Hideaway w/Ramp ( 1 )
To form the HIDEAWAY WITH
RAMP, you will need the e
piece :
When buildin the hideaway unit,
in ert the tube into the leeve
of the fabric piece fir t, then add
the connectors.
3
PARTS NAME QTY
3S 3- ay Straight ( 2 )
A35 Long Tube ( 1 )
B40 Long Curved Tube (all 2)
B31 Curved Tube ( 2 )
R2 Hideaway Arch ( 1 )
M1 Plush Mat ( 1 )
To form the HIDEAWAY ARCH,
you will need the e piece :