Prevue Pet Products Catville CONDO User manual

Catville™CONDO
Model: #7200 (Leopard) / #7201(Gray)
read first REVIEW BEFORE ASSEMBLY
• Designed for hand assembly.
No tools required.
•Check regularly to ensure all
components are connected.
• Place finished unit in an area
with room for cats to play and
interact with all features.
For assistance or replacement
parts, please contact Prevue Pet
Products:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL [email protected]
1
7200/7201— 12/14 —A4
3 C
3 C
4 C
4 C
3 C
3 C
Made in China or Prevue Pet Products, Inc., Chicago IL USA www.prevuepet.com 312 243-3624 [e-mail]
tips
• Loosely lay out all parts for each step.
• lide tubes into fabric pockets first—then add connectors.
• Use appropriate force when assembling connectors and tubes
to avoid unnecessary damage.
5 C
(1pcs)
PARTS NAME QTY
3 C 3-Way Corner ( 4 )
4 C 4-Way Corner ( 2 )
A35 Long Tube ( 7 )
G1 Ground Floor ( 1 )
To form the BASE, yo will
need these pieces:
To finish the base, yo will
need these pieces:
PARTS NAME QTY
A35 Long Tube ( 1 )
A1 isal Post ( 1 )
connectors & parts
4 C
(3pcs)
3 C
(4pcs)
3 S
(4pcs)
A35
Lon Tube
(11pcs)
TOY
Toy Post
(1pcs)
G1
Ground Floor
(1pcs)
M1
Plush Mat
(1pcs)
B28
Curved Tube
(8pcs)
A1
Sisal Post
(1pcs)
R
Hideaway Den
(1pcs)
When buildin the base unit,
insert lon tubes into the sleeves
of the fabric piece first, then add
the connectors.

5 C
4 C
7200/7201— 12/14 —A4 For more wonder ul cages, toys, and accessories or dogs, cats, birds, chickens, rabbits, errets and small animals, visit www.prevuepet.com
CARE INSTRUCTIONS
• Do not immerse in water or place
near hi h heat or open flame.
• Re ularly check the stability of
all connections of components.
• Spot clean fabric and frame with
a moist towel. Allow to air dry
thorou hly.
• Supervise pet interaction with the
product. Inspect for wear. Replace
when worn.
Build the top bar with these
components inserted into the
top sleeve of the hideaway.
Slide the curved tubes up into the
sleeves from the bottom, and insert
into the connectors.
Insert the connectors down onto the
vertical posts of the base unit.
3 S
3 S
3 S
3 S
2
PARTS NAME QTY
4C 4-Way Corner ( 1 )
5C 5-Way Corner ( 1 )
A35 Long Tube ( 1 )
TOY Toy Post ( 1 )
RHideaway Den ( 1 )
To form the HIDEAWAY DEN,
yo will begin with these pieces:
PARTS NAME QTY
B28 Curved Tube ( 4 )
For the hideaway roofline, yo
will need these pieces:
PARTS NAME QTY
3S 3-Way traight ( 4 )
A35 Long Tube ( 2 )
B28 Curved Tube ( 4 )
M1 Plush Mat ( 1 )
To finish the hideaway, yo will
need these pieces:
Build the final le s
onto the hideaway with
these components.
Add the plush mat
to finish.