Prevue Pet Products F046 User manual

Flight Cage
Mod ls: #F046 (black) + #F047 (whit )
Instructions onlin at www.pr vu p t.com
F046 + F047—09/16— A4 Made in China for Prevue Pet Products, Inc., 224 N Maplewood Ave, Chicago IL 60612 USA • www.prevuepet.com • 1 [800] 243-3624 • customerservice @ prevuepet.com
Lay o e side frame o its side, attach the storage shelf with a
hex screw, the add a d attach the opposite side frame.
Attach the frame rail
with hex screws.
Carefully flip the
base sta d u it
over...
...a d attach the storage
shelf a d the remai i g
frame rail with hex screws.
With the cage still o its side, add the
rolling casters i to the frame legs.
Set the completed sta d u it aside.
Orie t the lower side panel with the
grille/tray track faci g the cage i terior
a d the ope e d faci g the cage fro t.
Alig the exte ded wires o the side
pa el with the holes o the back panel
frame.
With the side pa el i serted, lea the
back pa el forward a d let gravity hold
the pieces i positio while attachi g
together with a hex screw.
Leave the u it lea i g forward.
Orie t the upper side pa el with the
food/water cup door ope i g out to
the cage exterior.
Alig the exte ded wires, i sert
the pa el i place, a d attach with
a hex screw.
Leave the u it lea i g forward.
I stall a d attach the opposite
side pa els i the same order a d
method.
1To assemble the STAND UNIT,
you will need these pieces:
2aTo assemble the CAGE UNIT,
you will need these pieces:
read first
REVIE BEFORE
ASSEMBLY
• TOOLS: An all n wr nch and a
cr sc nt wr nch ar includ d.
• Instructions ar th sam for
Flight Cag mod ls #F046 and
#F047. Th y diff r in color only.
• Ass mbly st ps that would b
asi r with a s cond p rson
ar indicat d with this symbol.
• For th b st r sults, follow th
ass mbly st ps in ord r.
For assistanc or r plac m nt parts,
pl as contact Pr vu P t Products:
PHONE [phone]
ONLINE www.pr vu p t.com
EMAIL custom rs rvic @ pr vu p t.com
× 8
× 4
× 4

F046 + F047—09/16— A4 For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit www.prevuepet.com
2bTo continue assembly of the
CAGE UNIT, you will need
these pieces:
3
Food/water cups:
Hook the cups o to the horizo tal wire u der
the s ap-spri g side doors.
Perches:
I stall perches o a vertical wire, resti g o a
horizo tal wire for stability. Stagger perch place-
me t to allow birds to sit, fly, a d move about.
Grille and Tray:
Rotate the wi dbell lock out of the way a d
slide the grille i to the top cha el.
Slide the tray i to the bottom cha el.
4To install the COMPONENTS,
you will need these pieces:
To attach the CAGE UNIT to
the STAND UNIT, you will
need the two completed units
with hardware:
× 4 s ts
× 8
Alig the exte ded wires alo g the back edge of the
roof panel with holes o the back pa el frame, a d the
exte ded wires alo g the side pa els with holes o the
u derside of the roof frame.
Attach the roof with two hex screws at the back cor ers.
WITHOUT a assista t, lay the
cage unit a d the stand unit o
the floor.
Alig the holes through the stand
unit with the holes through the
lower side pa el o the cage unit.
Attach together with the hex screw/
ut pairs. Push the screw through
from the cage exterior a d tighte
the ut from the cage i terior.
WITH a assista t, the cage unit
a d the stand unit ca be assembled
together upright or layi g flat.
Sta d the cage upright.
Your Flight Cage is ow fully assembled.
If you have a assista t, have them hold the u it upright while you
alig all exte ded wires of the roof/side pa els with the holes o
the backside frame of the front panel. Double-check the alignment of
extended wires for the entire cage. Attach the fro t pa el to the cage
with six hex screws.