Pride Mobility KITASMB1673 Owner's manual

1 of 3
www.prideservice.com www.pridemobility.com INFINFB2295/Rev. A/May 2009
TECHNICAL INSTRUCTIONS
Figure 2. Seatback RemovalFigure 1. Flip Forward Back Cane Kit Breakdown
BACK CANE
BRACKETS
T-NUTS
BUTTON
HEAD
SCREWS
NUTS
COPED
WASHER
COPED
WASHER
HEX
HEAD
SCREWS
HEX
HEAD
SCREWS
SEATBACK
A2
A1
A3
A4
A1
A2
A5
A6
A5
If you require any assistance with these instructions,
please call Pride Technical Service at 1-877-800-1248.
Canada providers, phone [phone].
Tools needed:
• Standard hex key set
Installation Instructions:
1. Remove the seatback and the accompanying
securement hardware (hex head screws, button head
screws, nuts, back cane brackets, coped washers, and
T-nuts). Discard the nuts, back cane brackets, and the
hex head screws. Retain all other hardware and
the seatback for future use . See figure 2.
FLIP FORWARD BACK CANE KIT INSTALLATION INSTRUCTIONS
KITASMB1673—Flip Forward Back Cane Assembly, TRU-Balance Tilt w/ Locking Hardware
Kit Contents:
REF# QTY PART # DESCRIPTION
A1 2 DWR1360B094 LOCKING BARREL,BLACK,STEEL,0.625"OD X 0.90"L,5/16-18 THREAD,B-1360-094
A2 2 SCRHHCS1241 SCREW,HHCS,BLACK ZINC,5/16-18 X 0.75",GRADE 8,W/NYLON PATCH,A-1360-014
A31 FRMASMB12385 BACK CANE,ASSY,FLIP FORWARD,SYNERGY SEAT/TILT,LEFT,TEXTURED,D-1360-104
A4 1 FRMASMB12386 BACK CANE,ASSY,FLIP FORWARD,SYNERGY SEAT/TILT,RIGHT,TEXTURED,D-1360-106
A5 2 SCRHHCS1585 SCREW,HHCS,BLACK ZINC,5/16-18 X 2.00",GRADE 8,SAE J429,W/NYLON PATCH,B-1005-214
A6 2 NUTNYLK1026 NUT,NYLOCK,BLACK ZINC,5/16-18

2 of 3
www.prideservice.com www.pridemobility.com INFINFB2295/Rev. A/May 2009
TECHNICAL INSTRUCTIONS
Figure 3. Locking Barrel Attachment
2. Attach the locking barrels ( A1 ) to the seat hinges using the supplied hardware ( A2 ). See figure 3.
3. Attach the back cane assemblies ( A3 and A4 ) to the locking barrels ( A1 ) and the seatback using the supplied
hardware ( A5 and A6 ) and the retained coped washers, button head screws, and T-nuts. See figure 4.
The Flip Forward Back Cane Kit is now ready for use.
A2
A1
A2
Figure 4. Seatback Attachment
A3
A4
A1
COPED
WASHER
COPED
WASHER
SEATBACK
A6
A5
A5
T-NUTS
BUTTON
HEAD
SCREWS

3 of 3
www.prideservice.com www.pridemobility.com INFINFB2295/Rev. A/May 2009
TECHNICAL INSTRUCTIONS
Figure 5. Lowering the Seatback
UNLOCKED
Figure 6. Raising the Seatback
LOCKED
NOTE: To lower the seatback, turn the adjustment knobs counterclockwise (unlocked position), then gently
push the seatback down. To raise the seatback, gently pull the seatback upwards and then turn the adjustment
knobs clockwise (locked position). See figures 5 and 6.