PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Top Shelf
Boom Shelf
4x Pneumac Wheels
4x Rod
2x Cross Bars
2 x Cross Bars
Victor Video Producon Cart (CT-VCTR)
Assembly Manual

2
Open all the 4 locks of Trolley to take out all
the parts, as shown in image.
Aer sliding the wheels, lock them with the
knob on top.
Unlock 4 Pneumac Wheels and slide onto
Trolley’s Boom Shelf, as shown in image.
Victor Cart Setup
NOTE: To keep the dolly in stac posion, lock
the wheels by pushing down the lever.
Now insert all the 4 Rods into 4 corners of
Boom Shelf. Tighten the knobs properly to
secure them.
Finally, mount Top Shelf of Trolley onto Rods
and ghten the knobs accurately, as shown in
image.
Note: Two people are required to set the top
shelf on the rods.

3
YOUR PROAIM VICTOR VIDEO PRODUCTION CAMERA CART
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.