PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Quad-4 Pro Cinema Doorway Dolly (DL-QDFW)
NOTE: If you have purchased (DL-QDFW-00) kit, you will receive the following:
Quad-4 Dolly with Side Boards
Chair
Z-bracket
4 x Pneumac
Wheels
Steering Push/Pull
Bar
Seat Rod

2
NOTE: If you have purchased (DL-QDFW-01) kit, you will receive the following:
Quad-4 Dolly with Side Boards
Chair
Z-bracket
4 x Pneumac
Wheels
Steering
Push/Pull Bar
Euro Adapter
Telescopic
Bazooka
100mm Bowl
camera Riser
Seat Rod
 Firstly, insert 4 Pneumac Wheels to wheel
rod of the Dolly. Tighten nuts properly with
help of provided tool to secure it.
 Posion single Steering Push/Pull Bar
centrally on the steering rod mount located
on rear axle of dolly. Connect them properly
by locking with provided knob.
Doorway Dolly Setup
 Posion dual Steering Push/Pull Bar on the
steering rod mount located on rear axle of
dolly. Connect them properly by locking with
provided knob.
NOTE: By correctly using Steering Push/Pull
Bars, it is possible to maneuver Quad Dolly with
extreme precision.

3
NOTE: You can use both the Steering Bars
together for heavier setups.
 To mount the Chair, you need to connect Z-
Bracket onto dolly base.
 Now aach the Chair with Z-Bracket and
ghten the provided knob to x it accurately.
 Insert Seat Rod into Z-Bracket and lock it
securely with locking knob.
Chair Setup
NOTE: Chair is adjustable and moves in
forward/backward posion, to provide more
comfort to the operator.
NOTE: Addional Side Plaorms can be used
to extend the size of Quad-4 Pro Dolly.
 Finally, insert 2 Side Boards into 2 connecon
rods found on each side of Main Dolly
Plaorm and secure them appropriately.

4
 Take out the allen bolts from dolly base to
aach Euro Adapter.
 Mount Telescopic Bazooka along with
100mm Bowl Camera Riser on Euro Adapter,
for instant height adjustment of your setup.
Tighten it with integrated Quick Lock Lever.
 Place the Euro Adapter by carefully aligning
the holes on dolly. Then ghten the allen
bolts back to secure it properly on the base.
NOTE: If you have purchased (DL-QDFW-01) kit, please consider the following steps.
NOTE: Mounng of Euro Adapter enables
ng of various camera mounng accessories
such as Bazooka, Risers, and other Adapters
etc.
YOUR PROAIM QUAD-4 PRO CAMERA DOORWAY DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.