PROAIM JB-VG04-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
4' Vega Video Camera Jib Crane for Video makers
& Filmmakers (JB-VG04-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Vega Jib 4’
Assemb ly Manua l
Handle
Weight Bar Rod
Flower Knob Counter Weight L Type Allen Key 3/16 1/8 Allen Key

2
• Aer opening the secon, loosen the
boom and side knobs of the Central Fork.
• Loosen the inbuilt grub screw in the central
fork with the help of 1/8 Allen key.
Feature: Central Fork mechanism facilitates
ultra-smooth pan-lt movements while
absorbing unwanted vibraons for cleaner
shots.
• Aer removing the screw, remove the
central part so that the mounng of the jib
becomes baby pin, then the jib can be
mounted on the 5/8 baby pin stand
(Not Included).
• Mount the Vega jib secon on the Jib Stand
(Not Included).
• Aer mounng the jib, ghten the both
knobs while aligning the holes with each
other.
4’ Vega Jib Setup
• Completely stretch and open the secon of
4 Vega Jib, as shown in the image.
• Insert counter weight into jib secon.
• Then stabilize the counter weight with the
help of the knob.
• Insert the weight rod into the secon.
• 4’ Vega jib is assembled as shown.

3
• To detach the handles from one another,
loosen them by turning them in circular
moon
Feature: The Camera Crane can be controlled
and moved with the help of a handle.
• Remove the washer from the handle.
• Insert the handle into the hole at the end
part secon of the Vega Jib, as shown in the
image.
• Aer inserng the handle, aach the
handle to the jib from the other side.
Handle Assembly
• Aach the handle with each other.
• Mount the Quick Release Plate
(Not Included) on the Camera mounng
plate of the Vega Jib.
• Aer mounng the Quick Release Plate
(Not Included), insert the bolts from the
boom side of the Camera mounng plate.
Camera Mounng Plate
• Insert a 1/4" bolt from the boom of the
extension Camera plate to secure the Quick
Release Plate (Not Included) and ghten
with the Allen key.
• Unlock the lever lock of the quick release
plate.

4
• Now, the Gimbal (Not Included) is
completely secured, as shown in the image.
• Insert the weight (Not Included) inside the
weight Rod.
NOTE: Use the weights according to your
camera weight set up requirements.
• Slide the Gimbal (Not Included) onto the
Quick Release Plate and lock it using the
locking lever.
• Monitor (Not Included) each frame by
aaching a monitor to the Jib using the
oponal Universal Clamp with
13"arculang double arms and 3/8"-16
Threaded Stud.

5
YOUR PROAIM 4' VEGA VIDEO CAMERA JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.