PROAIM SJ-FRMX-04 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Framax Scrim Jim Frame (4 x 4') (SJ-FRMX-04)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
4 × Scrim Jim Frame Tubes

2
 Using the push/pin buon, connect all four
tubes eortlessly from their corners.
Framax Scrim Jim Frame Setup
 Place any fabric to the hook-and-loop edges
on parallel sides on the Frame with corner
security tabs to enable mounng.
 Lock automacally through self-locking 2D
connectors, which keep your Frame set intact
throughout your shot and make it easier to
remove.
 Now, the Frame is fully assembled.
 Loosen the knobs of the clamps (Not Included)
aached to the Stands.

3
 Tighten all the knobs to secure the Frame.
 Aach the Frame with the clamps of both the
stands, as shown in the image.
 Your Frame is fully assembled with the Stands.
YOUR PROAIM FRAMAX SCRIM JIM FRAME
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.