PROAIM P-CNL-3MC User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
3 Curve-N-Line Video Camera Slider with
Moon Control System (P-CNL-3MC)
Assembly Manual
3 Curve-N-Line Slider
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2 x End Foot
Camera Mounng
Plate Assembly
3m Wire Remote Controller 12V Adapter

2
• Loosen the knobs of both end feet to adjust
them as per your requirement.
Curve-N-Line Video Camera Slider Setup
• Using an allen key, unscrew the bolts from
both ends of the slider to aach the end feet.
Foam with Bag Packing
• Aach the camera mounng plate assembly
onto the slider and ghten it with the help of
the knob provided.
• Aach one end of the provided 3m wire with
the motor and another end with the remote
controller as shown.
Tighten This Knob

3
• Push the motor towards your side and pull
the lever to aach the motor to the slider.
• Screw the uid head (Not Included) onto the
slider's camera mounng plate and detach
the uid head's quick release plate to mount
the camera.
• Aach the camera to the uid head's quick
release plate, ghten the screw with a screw-
driver (Not Included), and mount it on the
uid head.
• Now ghten the knob to secure it properly.
NOTE: Remove the motor by unscrewing the
allen bolt using an allen key to use it manually.
Motor With Slider Setup
Cauon: While performing this step, ensure that your camera plate is mounted onto
the slider.

4
YOUR PROAIM CURVE-N-LINE VIDEO CAMERA SLIDER WITH MOTION CONTROL SYSTEM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Green light blinks connuously in manual
mode
• Green light on connuously on auto mode
• In Auto Mode: Motor Move le or right in
automacally
• Normal Mode: Move motor le or right in
Manually.
REMOTE CONTROLLER
The controller can program precise camera
movements for interviews, establishing shots,
and other camera movements.
• Baeries: 12V DV baery (Not Included) /
12V DC adapter (Included)
• Red LED Indicates Power ON/OFF
• Orange LED Indicates when using Baery / DC
Adapter

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.