Promate reTrax User manual

reTrax
User Guide
Retractable Clip-On Bluetooth®Headset with
Multi-Point Pairing & Out of Range Buzzer

Introducon
Keep your headset wires tangle-free and in place with reTrax, the latest retractable
Bluetooth® headset by Promate. With a retractable, easy to use headset, now you
won’t have problems of untangling it while you’re in a hurry answering calls. You
can also wear this uniquely styled headset either as a clip or as a neck strap.
Outstanding features like incoming call alert and out of range buzzer which
reminds you that your phone is out of range or le behind makes this funconal
Bluetooth® headset a must have accessory to every smartphone user.
Packaging Content
• reTrax
• USB Charging cable
• Ear Buds
• User Guide
• Warranty Card
Specificaon:
• Bluetooth® Version: v3.0
• Input Power: 5 V
• Output power: 3 mW
• Impedance: 32 Ohms
• Speaker Frequency: 20-20,000 Hz
• Microphone Sensivity: -42 dB
• Signal-to-noise Rao: ＞80 dB
• Charging Time: 1.5 hours
• Talking me: 6 hours
• Baery Capacity: 100 mAh
• Effecve distance: up to 10 meters
1

Features:
• Bluetooth® v3.0 headset with out of range buzzer
• Mul-point pairing to connect two Bluetooth® devices simultaneously
• Crystal Clear sound quality
• Retractable, easy to use headset
• Incoming call alert
• Wear it as a clip or as a neck strap
• Made from ABS plasc
Compability:
reTrax may be paired as a headset to any compable Bluetooth® enabled devices.
Precauons
Please read all safety instrucons and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or aached products. To
keep the perfect performances of the product, kindly follow the below precauons:
1. Do not yank or forcibly pull the earphone cord.
2. Consider turning your reTrax off before placing it in your pocket or bag. If the
Mul-funcon buon is accidentally pushed, your phone may place an unintended call.
3. Do not expose reTrax to liquid or humidity, as it is not waterproof.
4. Do not use abrasive cleaning solvents to clean reTrax.
5. Do not expose reTrax to extremely high or low temperatures.
6. Do not expose reTrax to contact with sharp objects as this will cause scratches and damage.
7. Do not sck anything inside reTrax as this may damage internal components.
8. Do not aempt to replace reTrax’s baery. It is built-in and is not removable.
9. Use only the manufacturer supplied charger when charging reTrax.
10. Do not disassemble the charger as it may expose you to dangerous voltages or
other risks. Incorrect reassembly can cause electric shock when the headset is
subsequently used.
2

Appearance & Interface Descripon:
1. Headphone cable management Buon
2. Status Indicator
3. Mul-Funcon Buon
4. Volume Buon
5. Microphone
6. Speaker
7. Clip
8. Micro-USB Charging Socket
9. Neck Strap Hole
3
2
4
5
3
7
6
9
8
1

Operaon Instrucons:
1. Charging reTrax
Before using your reTrax for the first me, please insert the charger into the
power source and connect the other end to Micro-USB charging socket of
reTrax to charge the baery fully.
Note: Use only the supplied charging cable for charging. Charging indicaon
will be delayed for a few seconds if reTrax has not been used for a long period of me.
2. Power on/off reTrax
• Press and hold the Mul-funcon buon unl status indicator flashes blue.
reTrax is now turned on.
• Press and hold the Mul-funcon buon unl status indicator flashes red.
reTrax is now turned off.
3. Pairing reTrax
• Press and hold the Mul-funcon buon unl the status indicator flashes
blue and red alternately to go into pairing mode.
• Acvate Bluetooth® on your smartphone
4
Status
Status
Indicator
Audio (Earpiece)
1. Charging
Red light ON
No sound
2. Fully Charged
OFF
No sound
3. Low Battery
Red light for every 5
seconds
A short beep every 20
seconds
4.
Out of Battery
OFF
No sound

• Set your phone to discover ‘reTrax’ and follow the instrucon
• If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).
When the phone and reTrax are paired and connected, the reTrax’s status
indicator will flash blue.
4. Pairing Your reTrax with Two Bluetooth® wireless technology enabled phones
(Mul-point Pairing)
reTrax supports a Mul-point funcon to allow simultaneous pairing of reTrax
with two smartphones.
• Pair reTrax with the first phone (follow the steps above in “Pairing reTrax”).
• Turn off reTrax, the first paired phone is then disconnected automacally.
• Pair the reTrax with the second phone (follow the steps above in “Pairing reTrax”).
5. Reconnecng Your reTrax
• If reTrax has been powered off, it will reconnect to the phone automacally
aer switching on reTrax, if not, press Mul-funcon buon once to
manually reconnect.
• If the phone has been powered off and reTrax is then disconnected, you need
to press Mul-funcon buon once to reconnect when phone turns on again.
Else, reTrax will turn off automacally.
6. Using reTrax
5
Function
Buon Audio
(Headset)
Audio (Speaker)
Status Indicator
Incoming Call
--
4 Beeps for
every 2 seconds
Ringtone
Blue light flashes
Answer a Call
Press Mul-
funcon button
once to accept.
--
‘Di Do’ tone once
During the call,
blue light flashes
every 6 seconds
Answer a Second
Call
Press “Hold and
Answer” button
from your
phone
--
--
During the call,
the blue light
flashes in every 6
seconds
Reject a call
Press the Mul-
funcon button
twice
--
‘Di Do’ tone once
Blue light flashes
once

6
•Reject a second call directly on the other connected phone during the call.
End a Call
Press Mul-
funcon button
once to during a
call to end the
call.
--
‘Di Do’ tone once
Blue light flashes
once
Voice Dialing
Hold Mul-
funcon button
--
‘Do’ tone once
--
•Aer you hear a short beep, say the voice tag, and you must have the voice tag recorded
on your smartphone.
•Voice redialing is only allowed for those saved voice tag into the 1st connected phone if
you have connected two smartphones.
Last Number
Redial
Press the Mul-
funcon button
twice
--
‘Do’ tone once
--
•Redial the call from the 1st connected phone if two smartphones are connected.
Reset / Remove
the pairing
history
Press and hold
the Mul-
funcon button
and Volume +
--
‘Do Do’ tone once
Red light flashes
once
Out of range
alert
--
2 Beeps sound
‘Di Do’ tone
Blue light flashing
2times every 3
seconds
•reTrax will automacally reconnect within 5 minutes, otherwise it will turn off. If auto-
connect is not supported, press the Mul-funcon button once.
Call Transfer
(from reTrax to
smartphone / or
vice versa)
During a
conversation
press the Mul-
funcon button
twice
--
‘Do” tone once
(both from
reTrax to
smartphone / or
vice versa)
Blue light keeps
flashing when a
call is transferred
from reTrax
Adjust Volume
Press the
Volume +/- once
to increase/
decrease by 1
level (Total 8
levels)
--
--
--
Standby mode
without phone
connection (No
network
covered)
--
--
--
Blue light
flashing 2 times
for every 3
seconds
Standby mode
with phone
connection
--
--
--
Blue light
flashing 1 time
for every 10
seconds
Function
Buon
Audio
(Headset)
Audio
(Speaker)
Status
Indicator

Troubleshoong:
1. I cannot pair with my phone.
• Ensure your reTrax is power on and fully charged.
• Ensure the Bluetooth® seng is acvated on your phone.
• Ensure your reTrax is at pairing mode. (flashes blue and red alternately)
• Ensure your reTrax is not out of range of your phone.
If the above steps do not solve the problem, please turn off your reTrax and recharge it,
and then try again.
2. I cannot hear the sound in my headset.
• Ensure your reTrax is power on and fully charged.
• Ensure your reTrax is paired and connected with your phone.
• Ensure the conversaon is not transferred to your phone.
• Ensure the volume level is high enough.
3. I cannot turn off reTrax.
Please press and hold the Mul-funcon buon for a longer me, otherwise, please
recharge reTrax for 2-3 seconds then disconnect the charger, the reTrax now turns off.
4. I cannot turn on reTrax.
Ensure your reTrax is power on and fully charged, otherwise, please charge reTrax for
1-1.5 hours, and then turn on again.
5. My phone cannot be auto-reconnected with reTrax.
• Manually connect reTrax from your phone.
• Turn off the phone then turn it on again.
• Turn off the reTrax then turn it on again.
If the above steps do not solve the problem, turn off reTrax and reset it, pairing reTrax again.
6. Can I switch off the “Beep” Sound?
To guarantee that the An-Lost funcon is acve, the “Beep” sound cannot be switch off.
7. I hear a short “Beep” sound suddenly, what happen?
It is the An-Lost funcon that alerts you that your phone is out of range or le behind.
8. I hear a “Beep” sound during the call, what happen?
Low baery alert, please charge your reTrax.
9. I hear some noise during the call, why?
There is an obstrucon between reTrax and your phone, please remove it. Or please
put your phone on the table, don’t hold it on hand.
7