Promate Match User manual

Ergonomically Designed Lightweight Neckband
Bluetooth Headset
User Guide
Match

• Match
• User Guide
• USB Charging cable
• Bluetooth® Version: Bluetooth V2.1+EDR
• Supported Profiles: A2DP1.2, HFP1.5, AVRCP, HSP
• Input Power: 5V, 300mA
• Output Power: 2 X10 mw
• Impedance: 16 Ohms
• Speaker Frequency: 20HZ-20KHZ
• Mic Sensitivity: -38dB
• Signal-to-noise Ratio: >80db
• Charging Time: 1-2 hours
• Playing Time: 5 hours
• Battery Capacity: 3.7V/150mAh
• Operating Distance: 10m
Introduction
Packaging Contents
Specification:
1
Stunningly distinctive. Design meets functionality. Superior audio experience. That’s
Match for you. This stereo headset with Bluetooth® wireless technology is a real
head-turner with its sporty, form fitting, lightweight neckband design. Functional
button controls makes it easy to control your music or answer calls on the go while
the magnetic lock keeps the headset in place when not in use. And with enhanced
noise suppression technology and superior sound quality, this one of a kind headset
is a must for all adventurers, travellers and sport buffs alike.

Match may be paired as a headset to any compatible Bluetooth®enabled devices.
Features:
Precauons:
Compatibility:
2
•Bluetooth® wireless technology stereo headset
•Sporty, form fitting, lightweight neckband design
•Button controls for easy control of music and calls.
•Magnetic lock keeps headset in place
•Listen to music and answer calls all at once
•Enhanced echo and noise suppression technology with built in CSR chipset
•Superior sound quality
•Standby time: 200 Hours
Please read all safety instructions and warnings thoroughly before using this
product. Improper use of this product may result in damage to this or attached
products. To keep the perfect performances of the product, never use it in the
following conditions:
1. Moist or underwater conditions.
2. Conditions near the heater or high-temperature service.
3. Conditions with direct sunshine.
5. Never dismantle the product without due permission, otherwise it may nullify
the warranty clauses.

1. Multifunction button
2. Previous Button
3. Next Button
4. Volume “+”
5. Volume “-”
6. Mic
7. LED Indicator
8. USB Charging Port
9. Magnetic Lock
Appearance & Interface Descripon:
3
8
6
4
1
7
9
5
3
L
R
2

2. Pairing
• Press and hold the Multifunction button for at least 5 seconds until blue
and red LED flashes alternately. Match is now on pairing mode.
• Activate Bluetooth® on your device and set it to search for new devices.
• Select "Match" from the list of found devices on your Bluetooth® devices
and connect. If necessary, enter passcode 0000 to pair and
connect Match to your device. Now you can use Match for calls or
listening to music.
3. Music (Needs music player support)
Operaon Instrucons:
4
1. Basic Operaon
• Multifunction button: Long press it to turn Match on/off , enter into
pairing mode and answer/Reject calls.
• Adjust the volume: Press the "+" or "-" button to increase or decrease
volume.
• Next Button/Previous Button:
To go backward or forward to the songs you like. Music player supported.
• LED status indicator: Below are LED status and it’s corresponding mode:
LED status indicator
Mode
LED status
Power on Blue and Red LED blinks two times
Power off Red LED blinks Two times
Pairing Red and Blue LED blinks alternately
Incoming call Red LED blinks connuously
Charging Red LED stays on while charging
• Press the “Previous Button” for about 2 seconds to skip to the previous track.
• Press the “Next Button” for about 2 seconds to skip to the next track.
• Press the Multifunction button once to play/pause music.
(Some phones may require you to start a media player first)

4. Call
6. Charging
Plug the USB cable included to a USB port and the other end into Match’s
charge jack. It takes 1.5 hours to fully charge Match. When charging, Red
LED will light up .
Note:
The lifetime of the battery will be significantly reduced if your Match
is left uncharged for a long period. We recommend that you recharge
your Match at least once a month.
5
• Press the Multifunction button to answer an incoming call.
• Press Multifunction button to end a call.
• To ignore an incoming call, double press the Multi-Function button.
• To redial the last call number, double press the Multi-functional button.
• When a call rings during a music playing, the music automatically pauses to
allow you to answer or ignore the call. Once the call is ignored or ends, the
music is resumed.