Promate PX20 User manual

User Guide
PX20
Multifunction Ultra-Sleek Headset

Thank you for purchasing Promate PX20. It is a sleek and light Bluetooth™ 3.0+ EDR
Headset with easy operational multifunction button. You will be impressed by its
small design combined with maximum functionality and comfort. With long lasting
in-built battery, clear and stable connection you can enjoy hands free calls for more
than 10hrs and 300hrs standby on the go Use PX20 to dial, reject, redial and use
Voice Dial for compatible devices, only with one move away. This smart and
compact hands free with ultra-low radiation will suit everyone in their busy lifestyle
tasks.
Introduction
• Bluetooth™ version 3.0
• Multi-function button for easy headset control
• Superb sound quality
• Fast pairing
• 10 hours talk time
• 300 hours standby time
• Ultra-low radiation
• Built-in rechargeable lithium polymer battery for low power consumption
• Voice Dial
Features
• PX20
• Charging cable
• Ear hook
• User Guide
• Warranty card
Packaging Contents
1

Interface: Bluetooth™ version 3 (class 2)
Frequency Range: 2.4GHz~2.48 GHz
Operating Distance: 10 m
Standby Time: 150hrs
Talk Time: 10hrs
SNR: 70dB
Impedance: 32Ω
Output Power: 10mW
Battery Charging time: 1~2hrs
Operating Current: 12mA
Standby Time: Up to 300hrs
Technical Specification:
1. Bluetooth™ Indicator Light: It will blink blue when the headset is turned on
2. Multi-Function Key: Long press the button and you will turn the PX20
ON/OFF/ Pairing Button/ Reject (accept) calls.
3. Charging port: Use the provided charging cable to power up the device
4. Microphone:
5. Earpiece: Provided to adjust for either left or right ear.
Appearance and Interface Description
2

1. Bluetooth™ Indicator Light: It will blink blue when the headset is turned on
2. Multi-Function Key: Long press the button and you will turn the PX20
ON/OFF/ Pairing Button/ Reject (accept) calls.
3. Charging port: Use the provided charging cable to power up the device
4. Microphone:
5. Earpiece: Provided to adjust for either left or right ear.
Standby Time: Up to 300hrs
Battery Type: Polymer Rechargeable Battery
Voice Dial: Please check if this option is available in your
phone
Operating Temperature: -10 ~ 50°C
Storage Temperature: -20 ~ 70°C
Made form ABS Plastic with Electronic components
Instructional Usage
Before first use, please check the charging cable is original and the PX20 is
turned off or not before charging the Bluetooth™ headset. Plug charging cable
into the charging port; plug other side of the charging cable into the USB
charging port. Charging will start and a red light will go on. When charging is
completed the red light will turn blue.
Warning: Must use original charging cable to charge for PX20, otherwise it may
damage it.
Charging the PX20
• Switch on the PX20, after the blue light blinks, the blue light will remain bright,
at the time the headset enters to pairing mode.
• Switch on Bluetooth™ search function in your mobile phone or other device
needs to be connected, when PX20 is discovered, it will show on the screen.
• Select “PX20” (Some mobile phone may need to enter the password ”0000” to
pair), the headset will automatically connect to your mobile phone, the blue
light blinks two times.
• For iOS when PX20 is paired, you will be able to check the battery level on your
screen.
Pairing with Mobile Device:
2
3

Use any way of the following ways:
• Switch off the headset
• Switch off the Bluetooth™ function of your mobile phone
Disconnecting:
Press the multifunctional button to:
• Once to accept an incoming call or use the mobile phone to answer a call.
• Once to reject a call, or use your mobile phone to reject a call.
• Last call redialing- keep the button pressed for 2~3 seconds
• Voice dialing- keep the button pressed for few seconds ( check if your phone
supports this function)
Multifunctional Button:
Note: Pairing is only needed for the initial setup. After your first successful
connection, the PX20 will connect automatically to your phone when PX20 is
turned on.
Battery level indicator
for iOS devices
3
4

Please read this User Guide carefully before using the product.
The contents herein may be changed to deliver the better services to the
end-user. To keep the perfect performances of the product, never use it in cold,
hot, dusty or moistened areas or places, especially in the following conditions
moist or underwater conditions. Never dismantle this product without due
permission, otherwise it may nullify the warranty clauses.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life
time of electronic devices damage batteries and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature moisture can form inside the device and damage electronic circuit
boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics
Precautions
If you are unable to connect the phone to PX20, please try the following:
• Check if the battery is low.
• Check if PX20 is turned ON.
• Check if the Bluetooth™ option on your mobile phone is turned on.
Trouble Shooting
4
5

5