protech PC-560-G5 User manual

USER’S
MANUAL

Copyright Notice
I
PC-560-G5 P5/6x86 Embedded Card
WITH VGA & SSD
OPERATION MANUAL
COPYRIGHT NOTICE
This operation manual is meant to assist both Embedded Computer manu-
facturers and end-users in installing and setting up the system. The infor-
mation contained in this document is subject to change without any prior
notice.
This manual is copyrighted May 2000. You should not reproduce or
transmit it in any form or by any means, electronic or mechanical, in-
cluding photocopying and recording.
ACKNOWLEDGEMENTS
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.

Contents
II
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION
1-1 About This Manual ....................................................... 1-2
1-2 System Specification ..................................................... 1-3
1-3 Safety Precautions ......................................................... 1-6
CHAPTER 2 HARDWARE CONFIGURATION
2-1 Jumper & Connector Quick Reference Table ............... 2-2
2-2 Component Locations …............................................... 2-3
2-3 How to Set the Jumpers ................................................ 2-4
2-4 CPU Type & Clock Selection ....................................... 2-6
2-4-1 Intel 75/90 CPU Type & Clock Jumper Setting .............................. 2-6
2-4-2 Intel 100/120, CPU Type & Clock Jumper Setting .......................... 2-7
2-4-3 Intel 133/150 CPU Type & Clock Jumper Setting ........................... 2-8
2-4-4 Intel 166/200 CPU Type & Clock Jumper Setting ........................... 2-9
2-4-5 Intel MMX-166/200 CPU Type & Clock Jumper Setting ................. 2-10
2-4-6 Intel MMX233/Cyrix P-166 CPU Type & Clock Jumper Setting ...... 2-11
2-4-7 Cyrix P-120+/150+ CPU Type & Clock Jumper Setting .…............. 2-12
2-4-8 Cyrix 6x86MX-PR166/200 CPU Type & Clock Jumper Setting ....... 2-13
2-4-9 Cyrix MMX-233/266 CPU Type & Clock Jumper Setting ............... 2-14
2-4-10 Cyrix 6x86L-PR120/150 CPU Type & Clock Jumper Setting .........2-15
2-4-11 Cyrix 6x86L-PR166/AMDK5-75 CPU Type & Clock Jumper Setting 2-16
2-4-12 AMD K5-90/100 CPU Type & Clock Jumper Setting .................... 2-17
2-4-13 AMD K5-120/133 CPU Type & Clock Jumper Setting .................. 2-18
2-4-14 AMD K5-166/K6-166 CPU Type & Clock Jumper Setting ............ 2-19
2-4-15 AMD K6-200/233 CPU Type & Clock Jumper Setting .................. 2-20
2-5 RS232/422/485 (COM2) Selection ............................... 2-21
2-6 AT Keyboard or PS/2 Mouse Selection ........................ 2-22
2-7 Turbo LED Connector .................................................. 2-22
2-8 Green Function Connector ..................…......................... 2-22
2-9 SSD Memory Mapping Selection ..…........................... 2-23
2-10 COM1 Connector ... ..................................................... 2-24
2-11 COM2 Connector ......................................................... 2-24
2-12 Keyboard or PS/2 Mouse Connector …........................ 2-25
2-13 External Keyboard Connector ....................................... 2-25
2-14 Reset Connector ............................................................ 2-25
2-15 Floppy Disk Drive Connector ....................................... 2-26
2-16 Hard Disk Drive Connector .......................................... 2-27

Copyright Notice
III
2-17 Hard Disk Drive LED Connector ................................ 2-28
2-18 Power LED & Keyboard Connector ........................... 2-28
2-19 LCD Panel Connector ................................................. 2-29
2-20 VGA CRT Connector ................................................. 2-30
2-21 Power Connector .....................................…................ 2-30
2-22 Printer Connector ........................................................ 2-31
2-23 External Speaker Connector ........................................ 2-31
2-24 Panel Power Connector ............................................... 2-32
2-25 Memory Installation .................................................... 2-32
2-26 Solid State Disk Connector ......................................... 2-33
CHAPTER 3 SOFTWARE UTILITIES
3-1 Introduction ………....................................................... 3-2
3-2 VGA Driver Utility ....................................................... 3-2
3-3 Flash BIOS Update ……………..…………………….. 3-5
3-4 Watchdog Timer Configuration …..……...................... 3-7
CHAPTER 4 GREEN PC FUNCTION
4-1 Power Saving Block Diagram ....................................... 4-2
4-2 CPU Doze Mode ........................................................... 4-2
4-3 System Standby Mode .................................................. 4-2
4-4 System Suspend Mode .................................................. 4-3
CHAPTER 5 AWARD BIOS SETUP
5-1 Introduction ................................................................... 5-2
5-2 Entering Setup ............................................................... 5-3
5-3 The Standard CMOS Setup ………............................... 5-4
5-4 The BIOS Features Setup .............................................. 5-8
5-5 Chipset Feature Setup ................................................... 5-11
5-6 Power Management Setup ............................................ 5-13
5-7 PNP/PCI Configuration ................................................ 5-16
5-8 Load BIOS Defaults ...................................................... 5-18
5-9 Load Setup Defaults ...................................................... 5-18
5-10 Integrated Peripherals ..............................................…. 5-19
5-11 Password Setting ........................................................... 5-20
5-12 IDE HDD Auto Detection ............................................. 5-22
5-13 HDD Low Level Format ............................................... 5-23

Contents
IV
5-14 Save & Exit Setup ......................................................... 5-24
5-15 Exit Without Saving ………………………………….. 5-25
APPENDIX A EXPANSION BUS
PC-104 Connector Pin Assignment .......................................... A-2
ISA Bus Pin Assignment .......................................................... A-3
APPENDIX B TECHNICAL SUMMARY
Block Diagram ......................................................................... B-2
Interrupt Map ............................................................................ B-3
RTC & CMOS RAM Map ....................................................... B-4
Timer & DMA Channels Map .................................................. B-5
I/O & Memory Map ................................................................. B-6
APPENDIX C TROUBLESHOOTING
Troubleshooting for Error Message …..................................... C-2
Troubleshooting for POST Codes ......….................................. C-5

Page:1-1
INTRODUCTION
This chapter gives you the information for PC-560-G5. It also
outlines the System specification.
Sections include:
!About This Manual
!System Specifications
!Safety precautions
Experienced users can skip to chapter 2 on page 2-1
for Quick Start.
CHAPTER
1

Chapter 1 Introduction
Page: 1-2 PC-560-G5 USER
′
S MANUAL
1-1. ABOUT THIS MANUAL
Thank you for purchasing our PC-560-G5 P5/6x86 Embedded Card with
VGA and SSD, which is fully PC / AT compatible. The PC-560-G5
provides faster processing speed, greater expandability and can handle
more tasks than before. This manual is designed to assist you how to install
and set up the system. It contains five chapters. The user can apply this
manual for configuration according to the following chapters :
Chapter 1 Introduction
This chapter introduces you the background of this manual, and the speci-
fication for this system. The final page of this chapter will show you how to
avoid damaging this Embedded Card.
Chapter 2 Hardware Configuration
This chapter outlines the component’s locations and their functions. In the
end of this chapter, you will know how to set jumper and how to configure
this card to meet your own needs.
Chapter 3 Software Utilities
This chapter contains helpful information that informs you the proper
installations of the VGA driver and Flash BIOS. It also describes the
Watchdog-timer function.
Chapter 4 Green PC Function
This chapter explains the Green PC functions concisely.
Chapter 5 Award BIOS Setup
This chapter shows you how to set up the BIOS configurations.
Appendix A Expansion Bus
This Appendix introduces you the expansion bus for PC-104 and ISA BUS
Appendix B Technical Summary
This section gives you the information about the Technical maps.
Appendix C Trouble Shooting
This section outlines the error messages and offers you some solutions.

Chapter 1 Introduction
PC-560-G5 USER
′
S MANUAL Page: 1-3
1-2. SYSTEM SPECIFICATION
!
!!
!CPU :
Intel, AMD, Cyrix.
54C/55C, K5/K6, M1/M2.
320 pin PGA socket.
75/90/100/120/133/166/200/233/266MHz clock generator.
2.8V/2.9V/3.2V/3.3V/3.5V voltage regulator.
!
!!
!MEMORY :
Up to 256MB, EDO/FPM DRAM
Two 72pin SIMM sockets on board.
!
!!
!CACHE :
L1 Cache: Depended on CPU type
L2 Cache: On board 512KB Pipeline Cache
!
!!
!REAL-TIME CLOCK / CALENDAR :
CMOS data back up from BIOS set or BIOS default.
Dallas DS 12887 Real Time Clock.
!
!!
!BIOS :
Award Flash BIOS for plug & play function.
Easy update 128/256KB flash EEPROM.
Support Green Function.
Support S/IO Setup.
!
!!
!KEYBOARD CONNECTOR :
One mini DIN connector, Support keyboard or PS/2 Mouse by jumper
selection
One additional 5 pin external keyboard connector
!
!!
!BUS SUPPORT :
External ISA/PC-104 BUS.
Internal PCI Bus for VGA, and IDE.

Chapter 1 Introduction
Page: 1-4 PC-560-G5 USER
′
S MANUAL
!
!!
!DISPLAY :
Support VGA for CRT & Panel LCD
Support 32bits PCI Local Bus
VGA BIOS combines in 128/256KB flash ROM together with system
BIOS.
Support 2 MB Video memory
Support 41-pin connector 640 x 480, 800 x 600 resolutions on LCD Panel.
Panel support Color STN, TFT, EL.
CRT & LCD Panel Display simultaneously.
!
!!
!WATCHDOG :
I / O port 0443H to Enable watchdog.
I / O port 0441H to Disable watchdog.
Time-out timing select 0 / 8 / 16 / 24 / 32 / 40 / 48 / 56 / 64 / 72 / 80 / 88 /
96 / 104 / 112 / 120 sec ±25%.
!
!!
!IDE INTERFACE :
One IDE port supports 2 Enhanced IDE devices.
!
!!
!FLOPPY DISK DRIVE INTERFACE :
Supports up to two Floppy Disk Drives, 3.5" and 5.25" (360K / 720K /
1.2M / 1.44M / 2.88M).
!
!!
!DISK-ON-CHIP SOCKET :
Supports up to 144MB.
!
!!
!SERIAL PORT :
Two high speed 16550 Compatible UARTs with Send / Receive 16 Byte
FIFOs. COM1: RS-232; COM2: RS-232/422/485
MIDI Compatible.
Programmable Baud Rate Generator.
!
!!
!PARALLEL PORT :
SPP, ECP, EPP Function.
Bi-directional parallel port.

Chapter 1 Introduction
PC-560-G5 USER
′
S MANUAL Page: 1-5
!
!!
!GREEN FUNCTION :
Software support by BIOS setup.
Hardware support by switch control.
!
!!
!LED INDICATOR :
System power.
Hard Disk access.
Turbo and green function mode.
!
!!
!PC-104 BUS EXPANSION & SPEED :
ISA 8MHz
PC-104 8MHz
PCI Bus 33MHz
!
!!
!DMA CONTROLLER :
82C37 x 2
!
!!
!DMA CHANNELS :
7
!
!!
!INTERRUPT CONTROLLERS :
82C59 x 2
!
!!
!INTERRUPT LEVELS :
15
!
!!
!OPERATING TEMPERATURE :
0 to 60°C.
!
!!
!SYSTEM POWER REQUIREMENT :
DC Voltage: +5V, minimum +4.75V, maximum +5.25V
DC Ampere: 15A.
DC Voltage: +12V, minimum +11.4V, maximum +12.6V
DC Ampere: 500mA.
!
!!
!BOARD DIMENSION :
185mm x 122mm
!
!!
!BOARD NET WEIGHT :
0.26 Kg.

Chapter 1 Introduction
Page: 1-6 PC-560-G5 USER
′
S MANUAL
1-3. SAFETY PRECAUTIONS
Follow the messages below to protect your systems and yourself:
1. Beware of static electric charges on your computer on all occasions.
2. Don‘t touch any components of this card when the card is on. Always
disconnect power when the system is not in use.
3. Disconnect power when you change any hardware devices. For instance,
if you connect a jumper or install any cards with computer on, a surge of
power may damage the electronic components or the whole system.

Page 2-1
HARDWARE
CONFIGURATION
** QUICK START **
Helpful information details you the jumper & connector settings, and
components locations.
Sections include:
!Jumper & Connector Quick Reference Table
!Components‘ Locations
!Configuration and Jumper settings
!Connector Pin Assignments
CHAPTER
2

Chapter 2 Hardware Configuration
Page: 2-2 PC-560-G5 USER
′
S MANUAL
2-1 JUMPER & CONNECTOR QUICK REFERENCE TABLE
CPU Type Selection ......................................................... JP1
Bus Frequency Ratio Selection ........................................ JP2, JP3
CPU Clock Selection ........................................................ JP4
CPU Voltage Selection ..................................................... JP9, JP10
RS232/422/485 (COM2) Selection .................................. JP6
AT Keyboard or PS/2 Mouse Selection ........................... JP5
Turbo LED Connector ...................................................... TBL
Green Function Connector ............................................... GRN
SSD Memory Mapping Selection …................................ JP8, JP12
COM1 Connector .…........................................................ COM1
COM2 Connector ………………………………………. COM2
Keyboard or PS/2 Mouse Connector .……....................... DIN
External Keyboard Connector .......................................... EXKB
Reset Connector ............................................................... JP7
Floppy Disk Drive Connector .......................................... FDD
Hard Disk Drive Connector ............................................. HDD
Hard Disk Drive LED Connector ..................................... HDL
Power LED & KeyLock Connector ................................. KBL
LCD Panel Connector ...................................................... LCD
VGA CRT Connector ....................................................... VGA
Power Connector .............................................................. PWR
Printer Connector ............................................................. PRT
External Speaker Connector ............................................. SPK
Panel Power Connector .................................................... JP11
Memory Installation .........................................................
……………………………………. SIMM1, SIMM2
Solid State Disk Socket ................................................... SSD

Chapter 2 Hardware Configuration
PC-560-G5 USER
′
S MANUAL Page: 2-3
2-2 COMPONENT LOCATIONS
PC-560-G5 Connector, Jumper and Component locations

Chapter 2 Hardware Configuration
Page: 2-4 PC-560-G5 USER
′
S MANUAL
2-3 HOW TO SET THE JUMPERS
You can configure your board by setting jumpers. A jumper consists of
two or three metal pins with a plastic base mounted on the card, and a
small plastic “cap”(with a metal contact inside) to connect the pins. So
you can set up your hardware configuration by “open” or “close” the
pins.
The jumper can be combined into sets, which called jumper blocks.
When the jumpers are all in the block, you have to put them together to
set up the hardware configuration. The figure below shows how this
looks.
JUMPERS AND CAPS
If a jumper has three pins, for example labelled PIN1, PIN2, and PIN3.
You can connect PIN1 & PIN2 to create one setting and shorting. You can
either connect PIN2 & PIN3 to create another setting. The same jumper
diagrams are applied all through this manual. The figure below shows what
the manual diagrams look and what they represent.

Chapter 2 Hardware Configuration
PC-560-G5 USER
′
S MANUAL Page: 2-5
JUMPER DIAGRAMS
JUMPER SETTINGS

Chapter 2 Hardware Configuration
Page: 2-6 PC-560-G5 USER
′
S MANUAL
2-4. CPU TYPE & CPU CLOCK SELECTION
JP1 : CPU Type Selection
JP2, JP3 : Bus Frequency Ratio Selection
JP4 : CPU Clock Selection
JP10, JP9 : CPU Voltage Selection
The jumper settings are as follows:
2-4-1 Intel 75 / 90 CPU type & clock Jumper Settings
CPU
TYPE CPU CLOCK
Jumper setting
(Pin closed)
JP4 JP2 JP3 JP10 JP9 JP1
Jumper
Illustration
Intel
Pentium
75Mhz
50MHz 3-5
4-6 1-2 1-2 1-2 5-6
7-8
1-2
3-4 Open
Intel
Pentium
90Mhz
60Mhz 1-3
4-6 1-2 1-2 1-2 5-6
7-8
1-2
3-4 Open

Chapter 2 Hardware Configuration
PC-560-G5 USER
′
S MANUAL Page: 2-7
2-4-2 Intel 100 / 120 CPU type & clock Jumper Setting
CPU
TYPE CPU CLOCK
Jumper setting
(Pin closed)
JP4 JP2 JP3 JP10 JP9 JP1
Jumper
Illustration
Intel
Pentium
100Mhz
66MHz 2-4
3-5 1-2 1-2 1-2 5-6
7-8
1-2
3-4 Open
Intel
Pentium
120Mhz
60MHz 1-3
4-6 1-2 2-3 1-2 5-6
7-8
1-2
3-4 Open

Chapter 2 Hardware Configuration
Page: 2-8 PC-560-G5 USER
′
S MANUAL
2-4-3 Intel 133/150 CPU type & clock Jumper Setting
CPU
TYPE CPU CLOCK
Jumper setting
(Pin closed)
JP4 JP2 JP3 JP10 JP9 JP1
Jumper
Illustration
Intel
Pentium
133Mhz
66MHz 2-4
3-5 1-2 2-3 1-2 5-6
7-8
1-2
3-4 Open
Intel
Pentium
150Mhz
60MHz 1-3
4-6 2-3 2-3 1-2 5-6
7-8
1-2
3-4 Open

Chapter 2 Hardware Configuration
PC-560-G5 USER
′
S MANUAL Page: 2-9
2-4-4 Intel 166/200 CPU type & clock Jumper Setting
CPU
TYPE CPU CLOCK
Jumper setting
(Pin closed)
JP4 JP2 JP3 JP10 JP9 JP1
Jumper
Illustration
Intel
Pentium
166Mhz
66MHz 2-4
3-5 2-3 2-3 1-2 5-6
7-8
1-2
3-4 Open
Intel
Pentium
200Mhz
66MHz 2-4
3-5 2-3 1-2 1-2 5-6
7-8
1-2
3-4 Open