Proxxon FBS 115/E User manual

Precision Rotary Tool FBS 115/E
Manual
12 V 3 VA 3 VA
döjfkdgj sdgbjdsgj döfjdkgfjk
dlfida dlg,dlg d dgfdl fg
12 VA
12 VA
12 VA
3080767
Conforms to
ANSI/UL 60745-1
ANSI/UL 60745-2-1
Certified to
CAN/CSA-C22.2 No. 60745-1-04
CAN/CSA-C22.2 No. 60745-2-1-04

- 2 -
Notes

- 3 -
12 V 3 VA 3 VA
döjfkdgj sdgbjdsgj döfjdkgfjk
dlfida dlg,dlg d dgfdl fg
12 VA
12 VA
12 VA
1
12 V 3 VA 3 VA
döjfkdgj sdgbjdsgj döfjdkgfjk
dlfida dlg,dlg d dgfdl fg
12 VA
12 VA
12 VA
12 V 3 VA 3 VA
döjfkdgj sdgbjdsgj döfjdkgfjk
dlfida dlg,dlg d dgfdl fg
12 VA
12 VA
12 VA
1
5
67
2
3
4
Fig. 1
Fig. 3
Fig. 4
12 V 3 VA 3V
döjfkdgj sdgbjdsgj döfjdkgfjk
dlfida dlg,dlg d dgfdl fg
1
2
Fig. 2

Double Insulation eliminates the need for the
three wire grounded power cord and grounded power
supply system.
Avoid body contact with grounded surfaces such as
pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock, if your body is
grounded:
WARNING! Read and understand all instructions. Failure
to follow all instructions listed below, may result in electric
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS!
GENERAL SAFETY RULES
- 4 -

- 5 -

Dimensions:
Length: 81/2’’ with chuck (220 mm)
Weight: 1.1 lb (500 g)
Chuck capacity: 1/64 ’’–1/8’’ (0,5–3,2 mm)
Spindle collar: 3/4’’ (20 mm)
Motor:
Rotational speed 5,000–20,000 rpm
Voltage ~ 115 V, 60 Hz
- 6 -
Symbols
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Symbol Name Designation/Explanation
V Volts Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
Ø Diameter Size of drill bits, grinding wheels, etc.
n0No load speed Rotational speed, at no load
…/min Revolutions or reciprocation per minute Revolutions, strokes, surface speed, orbits etc. per minute
1, 2, 3, … Selector settings Speed, torque or position settings. Higher number means
greater speed
Infinitely variable selector Speed is increasing from narrow end
➞Arrow Action in the direction of arrow
Alternating current Type or a characteristic of current
Class II construction Designates Double Insulated Construction tools.

- 7 -
Power consumption: 1/8hp (100 W)
Noise emission ≤70 dB (A)
Vibration at handle ≤2.5 m/s2
 Class II Equipment (Double Insulation)
recommended
speed
Aluminum-Oxide
Mounted points, 2 pc. 20.000 rpm
Set of each one Alumi-
num-Oxide and Silicon
Carbide Grinding Wheel 20.000 rpm
Spring steel cut-off
blade, Ø 7/8”, 1 pc. 18.000 rpm
Aluminum-Oxide Cut-Off
Wheels, Ø 7/8”, 20 pc.,
incl. mandrel 20.000 rpm
HSS Twist Drill Set, 7 pc. 20.000 rpm
Brass Wheel Brush,
Ø 7/8”, 1 pc. 12.000 rpm
Sanding Bands,
150 grit, 5 pc. 20.000 rpm
incl. mandrel