Pyle PDWM2135 User manual

User Manual of Product 1:
Pyle Dual Channel Wireless Microphone System - VHF Fixed
Dual Frequency Wireless Mic Receiver Set with 2 Lavalier, 2
Headset Mics, 2 Transmitter, Receiver - For PA, Karaoke, Dj
Party - Pyle PDWM2145
User Manual of Product 2:
Pyle Channel Microphone System-VHF Fixed Dual Frequency
Wireless Set with 2 Handheld Dynamic Transmitter Mics,
Receiver Base-for PA, Karaoke, Dj Party (PDWM2135) , Black

VHFFixedFrequencyWirelessMicrophoneSystem
PDWM2135 • PDWM2140 • PDWM2145
PDWM2135 PDWM2140
PDWM2145

www.PyleUSA.com
1
*Each Wireless Microphone System operates within the qualied wireless
operating frequency range listed as: 174-216MHz.*
This microphone system operates on high-eciency, low-consumption
discharging techniques. Performance features include independent
developed mobile frequency compression,expander circuitry, image
frequency limiting circuits, multiple-checked silent and noise-free circuits,
antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 - PDWM2140 - PDWM2145 were manufactured to be easy to use
and still give you professional performance quality.
Simple Installation and Operation:
* Please note- select models come equipped with dierent transmitters
and microphones.
•Unscrew the bottom of the microphone (or slide open the battery compartment
tray of the belt-pack transmitter) to install two 'AA' Batteries. Screw the Battery cap
back on.
•Plug your receiving unit into your mixer or amplier with a 1/4" mono microphone
cord.
•Plug the receiving unit into your electrical wall outlet.
•Turn the receiver ON by using the ON/OFF switch located at the front of the unit.
•There is a switch located on each of the two microphones that turns each
microphone ON/OFF & mutes them individually.

www.PyleUSA.com
2
FEATURES AND SPECIFICATIONS
PDWM2135
System Features:
• VHF Narrow Band Receiver System
• Dual Frequency Design (Channel A/B)
• High Signal/Noise Ratio Performance
• Broad Frequency Response Range & Low Distortion
• Independent Adjustable Volume Control
• Dual Independent Channel Antennas
• RF Signal and AF Signal LED Indicators
• Radio Frequency and Audio Frequency
Handheld Microphones:
• RF Power Output: >13dBm
• Modulation Degree: >30KHz
• Power Current: <110mA
• Harmonic at Higher Degree: <60dB
• Modulation Pattern: FM
• Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
• Sensitivity: -95dBm (S/N:12dB)
• RF Image Rejection:-75dB
• Audio Dynamic Range: 95dB
• T.H.D.: <1%
• S/N Ratio: >70dB
• Neighboring Channel / Interference: >70dB
• Power: AC 120V, 60Hz
• Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
What's in the Box:
• Receiver Base
• (2) Handheld Microphones

www.PyleUSA.com
3
PDWM2140
Features:
• VHF Narrow Band Receiver System
• Dual Frequency Design (Channel A/B)
• High Signal/Noise Ratio Performance
• Broad Frequency Response Range & Low Distortion
• Independent Adjustable Volume Control
• Dual Independent Channel Antennas
• RF Signal and AF Signal LED Indicators
• Radio Frequency and Audio Frequency
Transmitters:
• RF Power Output: >13dBm
• Modulation Degree: >30KHz
• Power Current: <110mA
• Harmonic at Higher Degree: <60dB
• Modulation Pattern: FM
• Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
• Sensitivity: -95dBm (S/N:12dB)
• RF Image Rejection:-75dB
• Audio Dynamic Range: 95dB
• T.H.D.: <1%
• S/N Ratio: >70dB
• Neighboring Channel / Interference: >70dB
• Power: AC 120V, 60Hz
• Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64'' -inches
What's in the Box:
• Receiver Base
• Handheld Microphone
• Body-Pack Transmitter
• Lavalier Microphone
• Headset Microphone
• 1/4'' Audio Connection Cable

www.PyleUSA.com
4
PDWM2145
System Features:
• VHF Narrow Band Receiver System
• Dual Frequency Design (Channel A/B)
• High Signal/Noise Ratio Performance
• Broad Frequency Response Range & Low Distortion
• Independent Adjustable Volume Control
• Dual Independent Channel Antennas
• RF (Radio Frequency) Signal Indicator
• AF (Audio Frequency) Signal Indicator
Belt-Pack Transmitters:
• Modulation Pattern: FM
• RF Power Output: >13dBm
• Modulation Degree: >30KHz
• Power Current: <110mA
• Harmonic at Higher Degree: <60dB
• Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
• Sensitivity: -95dBm (S/N:12dB)
• RF Image Rejection:-75dB
• Audio Dynamic Range: 95dB
• T.H.D.: <1%
• S/N Ratio: >70dB
• Neighboring Channel / Interference: >70dB
• Power: AC 120V, 60Hz
• Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
What's in the Box:
• Microphone Receiver
(2) Body-Pack Transmitters
(2) Headset Microphones
(2) Lavalier Microphones

VHFFixedFrequencyWirelessMicrophoneSystem
PDWM2135 • PDWM2140 • PDWM2145
PDWM2135 PDWM2140
PDWM2145

www.PyleUSA.com
1
*Each Wireless Microphone System operates within the qualied wireless
operating frequency range listed as: 174-216MHz.*
This microphone system operates on high-eciency, low-consumption
discharging techniques. Performance features include independent
developed mobile frequency compression,expander circuitry, image
frequency limiting circuits, multiple-checked silent and noise-free circuits,
antenna diversity receiving circuit & switch impact noise defeat circuits.
The PDWM2135 - PDWM2140 - PDWM2145 were manufactured to be easy to use
and still give you professional performance quality.
Simple Installation and Operation:
* Please note- select models come equipped with dierent transmitters
and microphones.
•Unscrew the bottom of the microphone (or slide open the battery compartment
tray of the belt-pack transmitter) to install two 'AA' Batteries. Screw the Battery cap
back on.
•Plug your receiving unit into your mixer or amplier with a 1/4" mono microphone
cord.
•Plug the receiving unit into your electrical wall outlet.
•Turn the receiver ON by using the ON/OFF switch located at the front of the unit.
•There is a switch located on each of the two microphones that turns each
microphone ON/OFF & mutes them individually.

www.PyleUSA.com
2
FEATURES AND SPECIFICATIONS
PDWM2135
System Features:
• VHF Narrow Band Receiver System
• Dual Frequency Design (Channel A/B)
• High Signal/Noise Ratio Performance
• Broad Frequency Response Range & Low Distortion
• Independent Adjustable Volume Control
• Dual Independent Channel Antennas
• RF Signal and AF Signal LED Indicators
• Radio Frequency and Audio Frequency
Handheld Microphones:
• RF Power Output: >13dBm
• Modulation Degree: >30KHz
• Power Current: <110mA
• Harmonic at Higher Degree: <60dB
• Modulation Pattern: FM
• Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver:
• Sensitivity: -95dBm (S/N:12dB)
• RF Image Rejection:-75dB
• Audio Dynamic Range: 95dB
• T.H.D.: <1%
• S/N Ratio: >70dB
• Neighboring Channel / Interference: >70dB
• Power: AC 120V, 60Hz
• Receiver Dimensions (L x W x H):
8.07'' x 5.75'' x 1.64''
What's in the Box:
• Receiver Base
• (2) Handheld Microphones