Qlight QML60 User manual
PB 1
Flexible Gooseneck LED Work Light
QML60
QML
-
60
-
24
[Model number] [Product Dimension] [Voltage]
| | |
• QML • 60 - Ø60 • 24 - DC24V
65
6030
Ordering Specication
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o-• the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s speci¿cation.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, ¿re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. During wiring or maintenance, please completely turn o-• the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a ¿re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to ¿re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to ¿re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, ¿re, electric shock and loss of life.)
Please scan the QR code for more
detailed product information.
www.qlight.com
2 3
4- Ø6 HOLES
PCD72
Ø60
Ø15.5
Ø83
48 (600) 50
698±2
15.5 UL1015 18AWG
(0.75sq)x2C 400mm
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm
• This product can be wired regardless of polarity.
-
+
DC
Red
Black Fuse Power
DC24V
QML60
Model number QML60
Lens color Trasparent
Light color(Standard) Cooldaylight
Color temperature(Standard) 5,.300-6,100K
Illumination(at 1m) Max. 4,950Lux(with 25 degree lens)
Max.1,900Lux (with 45 degree lens-customization)
Model number QML60
Rated voltage DC24V
Range for operation
voltage DC21V-30V
Power consumption 5.5W
Insulation resistance
Min. 100M(500V DC mega ohm meter)
Withstanding voltage
DC : 500V AC, 60Hz, 1 minute
Protection rating
IP65
Operating temperature
-30℃to +60℃
Materials
Housing-Al(DEICASTING), Lens-PC
Certi¿cate
Weight(approx.)
0.87kg
■General Product Specifications
■Optics Specications
Product Specications
Dimensions
(Units : mm)
Wiring Instructions
2 3
Bracket(Al)
FLEXIBLE TUBE
(STEEL)
Housing(Al)
Cover(Al)
Parts Denition/ Bracket Adjustment
■ Parts Denition ■ The method of adjusting an angle
• This product is installed a corrugated tube type bracket and it is
possible to conveniently adjust the irradiation angle on the product
light source without a tool.
Installation/ Mounting Hole Specications
• First, machine taps or holes on the mounting surface (
①).
• The mounting hole of this product is 4.2mm in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and
tighten the nut from the opposite side of the mounting surface.
■ Installation
• Machine holes on the mounting surface referring to the diagram below.
■ Mounting Hole Specications
4-Ø6 HOLES PCD72
①
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP65.
• If the product is installed in locations with excessive dust or water other than the designated IP protection rating indicated(IP65),
it may cause malfunction or damage to the product.
• For further information, please visit our website(www.qlight.com).
Head O-ce | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept |
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team O-ce | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 - 408 - 519 - 5740 Fax. +1 - 408 - 519 - 5739
China Factory/ Shanghai Sales O-ce | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86
-
21
-
6651
-
7100 Fax. +86
-
21
-
6315
-
3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China
Tel +86
-
513
-
8384
-
9999 Fax +86
-
513
-
8384
-
9910
Product Operation Inquiry / Customer Support +82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea ( Postal Code : 08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea ( Postal Code : 50805)
For your safety
Speci¿cation and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.
www.qlight.com
EN - QML60 - 2111A
Other Qlight Work Light manuals
Qlight
Qlight QMFLN Series User manual
Qlight
Qlight QLEX-SLM Series User manual
Qlight
Qlight QMFL-300-Ex-24 User manual
Qlight
Qlight QML series User manual
Qlight
Qlight QNE User manual
Qlight
Qlight EPLUS Series User manual
Qlight
Qlight QMHL-150-D User manual
Qlight
Qlight QML User manual
Qlight
Qlight STA25SLM User manual
Qlight
Qlight SNES Series User manual
Popular Work Light manuals by other brands
Avantes
Avantes AvaLight-HAL operating manual
ProBuilt
ProBuilt Wobblelight 175-watt Metal Halide quick start guide
Parkside
Parkside PTSA 12 A1 Translation of the original instructions
brennenstuhl
brennenstuhl professionalLINE LA 4000 operating instructions
Draper
Draper RIL/COB1000/B manual
Niko
Niko 352-08440 manual
