Qlightec SPNA User manual
PB 1
Explosion Proof Electric Horn
SPNA
Please scan the QR code
for more
detailed product information.
www.qlight.com
SPNA - WM - 220 - LC
[Model
number] [Sound] [Voltage] [Sound selection]
| | | |
• SPNA • WS-Warning sounds
• WP-Special warning sounds
• WM-Melodies
• WA-Alarms
• WV-Customizable sounds
• 12-DC12V
• 24-DC24V
• 110-AC110V
• 220-AC220V
• (blank)
-Built-in switch
• LC
-External contact
Ordering Specications
’XULQJZLULQJRUPDLQWHQDQFHSOHDVHFRPSOHWHO\WXUQRWKHSRZHURIWKHSURGXFW)DLOXUHWRIROORZWKLVPD\OHDGWRDQHOHFWULFVKRFN
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
UDWLQJVLQGLFDWHGIRUHDFKSURGXFW)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVPD\FDXVHD¿UHWRWKHSURGXFWHOHFWULFVKRFNSK\VLFDOLQMXU\
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point.
)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVPD\OHDGWR¿UHHOHFWULFVKRFNRUSURGXFWGDPDJH
3OHDVHDSSO\WKHFRUUHFWYROWDJHWRWKHSURGXFW)DLOXUHWRIROORZWKHVHLQVWUXFWLRQVPD\OHDGWR¿UHHOHFWULFVKRFNRUSURGXFWGDPDJH
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device.
)DLOXUHWRIROORZWKLVPD\FDXVHGDPDJHWRSURSHUW\¿UHHOHFWULFVKRFNDQGORVVRIOLIH
Precaution for Safety
)DLOXUHWRIROORZWKHLQVWUXFWLRQVEHORZPD\FDXVHDORVVRIOLIHRUVHULRXVSK\VLFDOLQMXU\
Safety Precautions for Explosion Proof Products
Please follow the instruction below to ensure safe and correct use of explosion proof products.
1. Explosion proof products should be managed according to explosion proof regulations. Do not disassemble, assemble, alter or repair
the product arbitrarily.
2. The temperature rating of the product is the temperature the product will experience at the applied rated voltage and ambient
temperature indicated.
3. Use cable glands that satisfy the product’s explosion proof grade and temperature grade.
8QXVHGFDEOHHQWULHVPXVWEH¿OOHGZLWKPDWHULDOWKDWPHHWVWKHH[SORVLRQSURRIJUDGHDQGWHPSHUDWXUHUDWLQJ
5. Before installing the product, please make sure all cautions indicated on the labels, packaging, and operation manual of the product
are fully understood.
,QVWDOODWLRQPDLQWHQDQFHDQGUHSDLURIWKHSURGXFWPXVWEHSHUIRUPHGE\H[SHUWVLQWKHH[SORVLRQSURRI¿HOGRUSHUVRQVZKRKDYH
received relevant training.
)RUVDIHW\WKHSURGXFWVKRXOGEHLQVWDOOHGDQGRSHUDWHGLQHQYLURQPHQWVWKDWDYRLGKLJKWHPSHUDWXUHDQGKLJKSUHVVXUH
8. Please follow general safety precautions and avoid installing the product in locations that may generate excessive heat.
9. When installing the product in places where chemicals are located, please make sure that the environment does not have two or more
LQFRPSDWLEOHFKHPLFDOVPL[HG)RUVDIHW\SOHDVHUHDGWKHLQVWUXFWLRQPDQXDOFDUHIXOO\DQGEHPLQGIXORIWKHFKHPLFDOFRPSRVLWLRQV
where the product is used.
10. This product requires grounding.
3OHDVHQRWHWKDWVSHFLDOFRQGLWLRQVVKDOOEHDSSOLHGLIWKHVLJQ‡;·LVSODFHGDIWHUWKHFHUWL¿FDWHQXPEHU
)RUVDIHXVHUHJXODURYHUSUHVVXUHWHVWPXVWEHFDUULHGRXWLQDFFRUGDQFHZLWK(1FODXVH
)RUVDIHXVHWHPSHUHGJODVVPXVWEHSURWHFWHGIURPVWURQJLPSDFW
1. Please remove any objects that can interrupt ventilation around the product.
3OHDVHWXUQRWKHSRZHURIWKHSURGXFWLPPHGLDWHO\LILWIDLOVWRRSHUDWHSURSHUO\
&DUHIXOO\ZLUHWKHSURGXFWDFFRUGLQJWRHDFKSURGXFW¶VVSHFL¿FDWLRQ
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
)DLOXUHWRIROORZDQ\RIWKHLQVWUXFWLRQVDERYHPD\FDXVHPDOIXQFWLRQRUGDPDJHWRWKHSURGXFW¿UHDQGHOHFWULFVKRFN
Precautions for Correct Use
)DLOXUHWRIROORZWKHSURSHULQVWUXFWLRQVPD\FDXVHGDPDJHWRSURSHUW\WKHSURGXFWRUPDOIXQFWLRQRIWKHSURGXFW
that would void the warranty.
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
HORN
66
5540
118
dB
HORN
66
5540
118
dB
6040
6020
Ex
2 3
SPNA
134
150
150
32 127
172 327
134
CABLE ENTRY NPT 1/2"
4-Ø8.5 FITTING HOLES
Ø134
■
General Specications
Dimensions
(Units : mm)
Model number
SPNA
Range of
operating voltage
DC 12V or 24V
AC 120V or 230V
Ex mark
IECEX - Ex db IIC T6 Gb
ATEX - II2G Ex db IIC T6 Gb
KCs - Ex d IIC T6 IP66
Ex d IIB+H2 IP66 T6
NEPSI - Ex d IIC T6 Gb
Ex tDA21 IP66 T80°C
CCC - Ex d IIC T6 Gb
TS - Ex db IIC T6 IP66 Gb
Ambient
operating
temperature
&7DPE&76
&7DPE&.&V
&7DPE&
Explosion proof
Zone
Zone1, Zone2, Zone21, Zone22
Protection rating
IP66
Model
number Voltage Current Sound pattern and volume &HUWL¿FDWHV Weight
SPNA
DC12V 2.211A • WS-5 Warning sounds : 118dB
• WP-5 Special warning sounds : 118dB
• WM-5 Melodies: 118dB
• WA-5 Alarms : 116dB
• WV-5 Customizable sounds : 113dB
6.09kg
DC24V 1.022A
AC110V 0.226A 6.44kg
AC220V 0.113A
■
Explosion Proof Specications
Zone
GH¿QLWLRQV*DV
Zone 1
High risk gas/vapour(Gas)
Zone 2
Medium risk gas/vapour(Gas)
Group
GH¿QLWLRQV*DV
GROUP II A
Acetone, Petrol, Methanol, Propane, Toluene
GROUP II B
Ethylene, City gas
GROUP II C
Hydrogen, Acetylene, Carbon sulphide
Maximum
surface
temperature of
electrical
Equipment
T1
450
°C
T2
300°C
T3
200°C
T4
135
°C
T5
100
°C
T6
85
°C
Group
GH¿QLWLRQV’XVW
Zone 21
High risk powder/dust(Dust)
Zone 22
Medium risk powder/dust(Dust)
Group
GH¿QLWLRQV’XVW
GROUP II A
,JQLWLEOH¿EHUV\LQJV(more than 0.5mm)
GROUP II B
Non-conductive dusts
GROUP II C
Conductive dusts
Product Specications
2 3
SPNA-DC/AC SPNA-DC/AC
Sound Setting - Select using the switch
inside of the unit
•
Standard unit has 5 built-in sound
tones.
6HOHFWGLHUHQWEXLOWLQVRXQGVXVLQJWKHVRXQGVHWWLQJVZLWFK
Wiring Instruction for LC Type
• LC type product with exposed sound selection signal line is
available upon request. Please refer to the diagram below
for wiring.
SPNA-DC/AC
SPNA-DC/AC
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm
External signal line - UL1007 AWG22(0.3sq) 400mm
• This product can be wired regardless of polarity.
Category Sound pattern Channel Sound tone Volume
(Max.)
WS
5 Warning
sounds
Ch1
)LUH$$1*
118dB
Ch2
Emergency WA-U
Ch3
Ambulance PI-PO
Ch4
0DFKLQHU\)DXOW
Ch5
High Expansion
WP
5
Special
Warning
sounds
Ch1
)LUH$$1*
118dB
Ch2
Abandon Alarm
Ch3
0DFKLQHU\)DXOW
Ch4
High Expansion
Ch5
7 Short PI. / 1 Long
WM
5 Melodies
Ch1
Sweet Home
118dB
Ch2
)RU(OLVH
Ch3
Cuckoo's Waltz
Ch4
Piano Sonata
Ch5
Turkish March
WA
5 Alarms
Ch1
Beep Intermittent
115dB
Ch2
Door Chime
Ch3
Phone Ring
Ch4
PI.PI.PI Short
Ch5
Tripping Beat
WV
5
Customizable
sounds
Ch1
Available upon request
(customized voice type) 113dB
Ch2
Ch3
Ch4
Ch5
Volume Adjustment
■
Sound Type by Group
Ch1-Ch5
Sound setting switch
Terminal Box Wiring Instructions
• Terminal block is located inside of the product. Unscrew the 4 bolts located in the upper body
to get rid of the upper lighting element of the unit.
• Please apply fork (U-type) or ring (O-type) locking spade terminal at naked tip of the wire for
secure connection.
• Please wire the power line to terminal ①
)RU$&W\SHSURGXFWVZLUHUHJDUGOHVVRISRODULW\
)RU’&W\SHSURGXFWVZLUHWHUPLQDORIEODFNOLQHWRSRODULW\
Power
Common
)XVH
Red
Amber
Green
Blue
)XVH
White
White
Black
Black
Common
Power
Red
Amber
Green
Blue
White
White
Black
Black
(EXTERNAL TRASISTOR-NPN)
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
(EXTERNAL CONTACT)
• The volume output of this
product is adjustable.
•
Turn the volume dial clockwise
to increase the volume, and
turn counter clockwise to
decrease the volume.
• There will be no sound when
the dial is put at MIN.
Volume Dial
VOL.
MIN.Max.
※Applicable cable range : AWG16-AWG22
①
4 5
•
Machine holes on the mounting surface referring to
the diagram below.
Grounding Instructions
Mounting Hole Specications
M4 ground contact part
•
Please use an M4 bolt at the location marked in the diagram
above to ground the product.
•
When connecting the grounding cable, please use a ring terminal.
• Please use a grounding cable with a diameter greater than 4mm.
•
)LUVWPDFKLQHKROHVRQWKHPRXQWLQJVXUIDFH
①
•
The mounting hole of this product is 8.5mm in diameter.
•
When machining taps, fasten the bolt through the mounting hole of
the bracket.
• When machining holes, insert the bolt through the hole of the product,
and tighten the nut from the opposite side of the mounting surface.
v
Installation
Parts Denition/ Installation
v
Parts Denition
Housing(AI)
Cover(AI)
Horn housing
(STS316L)
①
4-Ø9 HOLES
134
134
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
3OHDVHPDNHVXUHWRXVHWKHSURGXFWLQDQHQYLURQPHQWWKDWPHHWVWKHVSHFL¿HGH[SORVLRQSURRIUDWLQJDQGUHJXODWLRQV
)RUIXUWKHULQIRUPDWLRQSOHDVHYLVLWRXUZHEVLWHZZZTOLJKWFRP
Precautions for installation
• In case of outdoor applications, install the product in the upright
position. Do not install the product horizontal or upside-down
positions where water can potentially penetrate into the product
and impact it’s operation.
Left direction Reverse direction Right direction
[Installation]
4 5
Product installation direction
■ Install the product in accordance with the manual. Otherwise rainwater or moisture may penetrate into the product.
ㆍELECTRONIC SOUNDER/SIGNAL HORN
Sounder part shall not be facing the sky.
Sounder part shall not be facing the sky.
ㆍBEACON/SIGNALING LIGHT
Power cord inlet part shall not be facing the sky.
Power cord inlet part shall not be facing the sky.
ㆍSIGNAL TOWER LIGHTS
ㆍ+($9<’87<(;3/26,213522)6,*1$/,1*6
※)RUSURGXFWVZLWKDSURWHFWLRQUDWLQJRIOHVVWKDQ,3;SOHDVHLQVWDOOLWYHUWLFDOO\
※)RUSURGXFWVZLWKDSURWHFWLRQUDWLQJRIOHVVWKDQ,3;SOHDVHLQVWDOOLWYHUWLFDOO\
MEMO
MEMO
+HDG2FH_6XLWH67;97RZHU*DVDQGLJLWDOUR*HXPFKHRQJX6HRXO.RUHD
7HO7ROOIUHH)D[
)DFWRU\_0XNEDQJUR6DQJGRQJP\HRQ*LPKDHVL*\HRQJVDQJQDPGR.RUHD7HO7ROOIUHH
Qlight OverSEAs Sales Dept |
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100
4OLJKW3XEOLF5HODWLRQV0DUNHWLQJ7HDP2FH_1DNGRQJGDHUR6DVDQJJX%XVDQ.RUHD(RPJXQJ’RQJ7HO
1RUWK)LUVW6WUHHW6XLWH6DQ-RVH&$86$7HO)D[
&KLQD)DFWRU\6KDQJKDL6DOHV2FH_1DQGD5RDG%DRVKDQ$UHD6KDQJKDL&KLQD7HO
-
21
-
6651
-
)D[
-
21
-
6315
-
3929
&KLQD)DFWRU\6LWH4LGRQJ_+DL\DQ5RDG4LGRQJ+LJKWHFK,QGXVWULDO’HYHORSPHQW=RQH4LGRQJ-LDQJVX3URYLQFH&KLQD
Tel +86
-
513
-
8384
-
)D[
-
513
-
8384
-
9910
Product Operation Inquiry / Customer Support +82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※$//352’8&7352’8&763(&,),&$7,216$1’’$7$$5(68%-(&772&+$1*(:,7+287127,&(72,03529(
5(/,$%,/,7<)81&7,2125’(6,*12527+(5:,6(
+HDGRIILFH6XLWH67;97RZHU*DVDQGLJLWDOUR*HXPFKHRQJX6HRXO.RUHD (Postal Code : 08507)
)DFWRU\0XNEDQJ5R6DQJGRQJ0\HRQ*LPKDH6L*\HRQJVDQJQDP’R.RUHD Postal Code : 50805)
For your safety
6SHFL¿FDWLRQDQGGLPHQVLRQVOLVWHGLQWKLVFDWDORJXHVXEMHFWWRFKDQJHZLWKRXWQRWLFHIRUSURGXFWTXDOLW\LPSURYHPHQW
7KHQHZHVWSURGXFWLQIRUPDWLRQLVDYDLODEOHRQRXUZHEVLWHZZZTOLJKWFRP
3OHDVHUHDGWKHLQVWUXFWLRQPDQXDODWWDFKHGWRWKHSURGXFWFDUHIXOO\EHIRUHLQVWDOODWLRQDQGXVH
www.qlight.com
EN - SPNA - 2302A
Table of contents
Other Qlightec Security System manuals
