Qtx TinyMover User manual

www.avsl.com 150.462UK User Manual
TinyMover
2-in-1 40W LED Mini Moving Head
Item ref: 150.462UK
User Manual
Perfect for smaller venues, this compact yet surprisingly bright 2-in-1 mini moving head features RGBW
PAR lights and ball effect. Easily operated using internal auto or sound to light programs or by 14/18
channel DMX connection for more precise control, the TinyMover can be free standing or mounted to
trussing using the supplied brackets and provides bright and colourful coverage for such a small unit.
In the box:
Your TinyMover should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.

www.avsl.com 150.462UK User Manual
Placement:
•Use the included mounting bracket to fix to a stand or lighting truss.
•Keep away from damp or dusty environments.
•Ensure adequate air-flow around the fixture housings.
•Ensure adequate access to controls and connections.
•Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
•Use a soft cloth with a neutral detergent to clean the casing as required.
•Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
•Do not use strong solvents for cleaning the unit.
Rear panel and controls:
1. Menu button
2. Up button
3. Down button
4. LED display
5. Enter button
6. IEC input (110-240 Vac, 50/60 Hz)
7. DMX output
8. DMX input
1.
2.
3.
4.
5.
6.
7.
8.

www.avsl.com 150.462UK User Manual
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to confirm the desired setting.
Menu
Function
Description
Addr
A001 - A512
DMX address settings
CHnd
14CH-18CH
DMX channel select
SLnd
Mast-d512
Master or slave select
Shnd
Sh1-Sh4
Sound active modes
Auto
Aut1-Aut4
Auto mode select
Sp1-Sp9
Auto mode speed select (slow to fast)
Sens
1-100
Sound active mode sensitivity adjust
LED
On-Off
LED display setting
diSP
On-off
LED display reverse
Pan
No-Yes
X-axis positive phase/X-axis reverse phase
Tilt
No-Yes
Y-axis positive phase/Y-axis reverse phase
Ver
V10
Software version
Rest
Factory reset
DMX mode:
The TinyMover can be controlled by DMX signal, simply connect the DMX signal source to the DMX input
on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the “UP”and “DOWN”buttons and “ENTER”. The A on the LED display will begin
to flash once it’s received the DMX signal from the controller. This unit has 14 or 18 DMX channels as
indicated in the tables below:
14 Channel:
Channel
Value
Description
1
0-255
PAN adjust
2
0-255
Tilt adjust
3
0-255
Motor speed
4
0-255
Master dimmer
5
0-255
LED ball red dimmer
6
0-255
LED ball green dimmer
7
0-255
LED ball blue dimmer
8
0-255
LED ball white dimmer
9
0-255
PAR red dimmer
10
0-255
PAR green dimmer
11
0-255
PAR blue dimmer
12
0-255
PAR white dimmer
13
0-9
No strobe
10-140
Strobe 0-100%
141-255
Strobe random speed
14
0-9
Manual dimmer
10-199
Auto mode
200-209
Waiting for 2s reset
210-239
Manual dimmer
240-255
Sound active mode

www.avsl.com 150.462UK User Manual
18 Channel:
Channel
Value
Description
1
0-255
PAN adjust
2
0-255
PAN fine adjust
3
0-255
Tilt adjust
4
0-255
Tilt fine adjust
5
0-255
Motor speed
6
0-255
Master dimmer
7
0-255
LED ball red dimmer
8
0-255
LED ball green dimmer
9
0-255
LED ball blue dimmer
10
0-255
LED ball white dimmer
11
0-255
PAR red dimmer
12
0-255
PAR green dimmer
13
0-255
PAR blue dimmer
14
0-255
PAR white dimmer
15
0-35
Manual dimmer
36-255
10 Colour temp adjust
16
0-14
Manual dimmer or colour temp selection
015-255
Colour selection
17
0-9
No strobe
10-140
Strobe 0-100%
141-255
Strobe random speed
18
0-9
Manual dimmer
10-199
Auto mode
200-209
Waiting for 2s reset
210-239
Manual dimmer
240-255
Sound active mode
Specifications:
Power supply
110-240Vac, 50/60Hz (IEC)
Power consumption
40W
LED power
LED ball 10W RGBW, LED wash 4x 6W RGBW LEDs
Modes
Auto, sound, master/slave, DMX512
DMX channels
14 or 18CH
PAN range
540°
Tilt range
270°
Dimensions
190 x 140 x 124mm
Weight
1.25kg
Troubleshooting:
No power (mains)
Check mains voltage is correct and outlet is switched on
Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
Check that unit is in DMX mode and ensure the A on the DMX address flashes to
confirm it’s receiving a DMX signal
Unresponsive to DMX
Check DMX controller is not set to black out

www.avsl.com 150.462UK User Manual
Overheating/
cutting out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Ensure adequate ventilation and unit is not too close to a heat source
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.