RADWAG PUE C32 User manual

Quick Start
•PUE C32
Indicator
ITKB-09-01-12-20-EN

To view the full user manual, go to the website or scan the QR code:
radwag.com/en/manuals/I36

1. CONTENT
*The type of plug may vary depending on the country.
Power supply*
×1
Indicator
×1
2. NOTES AND WARNINGS
Operate the indicator in a room free from dust where the temperature ranges
-10–40 °C (+14–104 °F) and where the relative humidity is below 80%. Potential
temperature change shall occur gradually and slowly.
Place the scale on a table or a wall bracket ensuring stability. For the most stable
and repeatable results it is recommended to use an anti-vibration table.
-10 oC
+14oF
+104oF
+40 oC
Place the scale away from heat
sources. Avoid exposing the scale to
the sunlight.
Avoid exposing the scale to the influ-
ence of a magnetic field. Do not weigh
magnetic substances.
Not intended for use within EX zones.
Not intended for weighing explosive or
flammable substances.

The indicator is ready for operation!
Press ON/OFF key to start the indicator.
3.2. Indicator Start-Up
3. PREPARING FOR WORK
3.1. Indicator Temperature Stabilization
Place the indicator on the workstation and leave it until it
reaches ambient temperature.
Prior to switching the indicator on let
it reach room temperature (estimated
stabilization time: 8 hours).
Connect the power supply to a DC
connector located on the side of the
indicator.
Connect the power
supply to the mains.
1 2 3
1
1- 8 h

0.00
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE C32
E2R
Weighing
4. PANEL AND SCREEN
4.1. Keypad
4.2. Home Screen
Proximity sensor
Switching
on / off
Home screen
Log in
Cancel
Keyboard mode
Back / Delete
Zeroing
Taring
Units
Confirm
Working mode
Operation confirmation
or report printout
Text keypad / Numeric keypad
with navigation keys
Proximity sensor
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE HX7
E2R
Weighing
Programmable
buttons
Programmable
workspace
Weighing result
window
Status bar
Working mode
parameters
Lot numberSelect
product
Zero statistics Databases

A list of operators is displayed. Use keys to
select “Administrator” option and press key
to confirm.
Press key to enter “Operator” menu.
5. SETTINGS
5.1. Administrator’s Logging In
1 2
Some scale settings are only available to the Administrator.
Prior to setting scale parameters log in as the Administrator.
0.00
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE C32
E2R
Weighing
Operator
Log out
Admin
Working mode
Weighing
Checkweighing
Dosing
0.00
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE C32
E2R
Weighing
0.00
><
Towar:
Użytkownik: Suma:
0.00 kg
0.00 kg
kg
Tara:
PUE C32
E2R
4.3. Working Modes
4.4. Units Selection
Press key to enter
working modes menu.
Press keys to select working mode and
press to confirm.
Press key to change the mass unit.
The scale enables selecting the
following mass units:
Weighing
Checkweighing
Dosing
Formulations
Percent weighing
Parts counting
•Gram [g]
•Kilogram [kg]
•Carat [ct]
•Ounce [oz]
•Pound [lb]
•Newton [N]
•Custom unit 1 [U1]
•Custom unit 2 [U2]

3 4
You have logged as the Administrator.
Operator
0.00
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE C32
E2R
Weighing
•Gram [g]
•Kilogram [kg]
•Carat [ct]
•Ounce [oz]
•Pound [lb]
•Newton [N]
•Custom unit 1 [U1]
•Custom unit 2 [U2]
Using keys select “Working modes” and
press key to confirm.
5.2. Proximity Sensors Configuration
Prior to the proximity sensors configuration, log in as the Administrator (see step 5.1.).
You can assign a function of your choice to each proximity sensor. In addition, you can assign a different func-
tion to the same sensor in different working modes. See the exemplary procedure for sensors configuration
for the “Weighing” mode.
1 2
Press key.
Name
Left sensor None
Right sensor
Name
Left sensor None
Right sensor
43
Using keys select „Weighing” mode and press
key to confirm.
Using keys select ‘Proximity sensors’ and
press key to confirm.
Readout
Autotare
Print mode When stable
Proximity sensors
Weighing
Working modes
Accessibility
Parts counting
Checkweighing
Weighing
When the field for filling the password in is
opened, confirm the empty field by pressing
key.

Using keys select a function to be
assigned to the respective sensor. Press
key to confirm.
6
5
Using keys select right or left
sensor and press to confirm.
.
Right sensor
Accept / Print
Print header
Print footer
Zeroing
Name
Left sensor None
Right sensor
Follow the above procedure to configure proximity sensors
for other working modes.

Using keys select a function to be
assigned to the respective sensor. Press
key to confirm.
6. CONNECTING PERIPHERALS
Wi-Fi®
Wi-Fi®is a registered trademark of Wi-Fi Alliance.
Computer
Computer
Computer
Power supply
Computer
Printer
Printer
Keypad
Printer
Printer
Barcode
scanner
Barcode
scanner
Additional
display

7. CLEANING AND MAINTENANCE
Avoid using aggressive cleaning
agents (e.g. solvents, cleansers
containing chlorine, corrosive
substances and bleach).
• Plasticelementscan be cleaned with a soft cloth slightly moistened with a solution of water and a mild detergent
(e.g. soap or dishwashing liquid)..
•Dry cleaned elements using soft and dry cloth or use dust-free paper towel to absorb the remaining moisture.
• Donotinstallthecomponentsuntiltheyarecompletelydry.     
Avoid using cleansers containing
abrasive substances or scouring
preparations.
Make sure that no dust or liquid
enters the sockets and the inside
of the indicator.
7.2. Cleaning Tips
Prior to cleaning it is necessary to
disconnect the scale from the mains.
Unplug the connector from the
electrical socket.
For cleaning use only soft cloths made
of microfiber. Do not use any abrasive
cloths or any material that may scratch
the surface!
Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device!
7.1. Notes and Warnings

www.radwag.com