RADWAG PUE HX7 User manual

Quick Start
•PUE HX7
Indicator
ITKB-12-01-12-20-EN

To view the full user manual, go to the website or scan the QR code:
radwag.com/en/manuals/B3G

1. CONTENT
Indicator
×1
2. NOTES AND WARNINGS
Operate the indicator in a room where the temperature ranges
between -10–40 °C (14–104 °F) and where the relative humidity is below 80%.
Potential temperature change shall occur gradually and slowly.
-10 oC
+14oF
+104oF
+40 oC
Place the scale away from heat
sources. Avoid exposing the scale to
the sunlight.
Avoid exposing the scale to the influ-
ence of a magnetic field. Do not weigh
magnetic substances.
Not intended for use within EX zones.
Not intended for weighing explosive or
flammable substances.

The indicator is ready for operation!
Press ON / OFF key to start the indicator.
3.2. Indicator Start-Up
3. PREPARING FOR WORK
3.1. Indicator Temperature Stabilization
Place the indicator on the workstation and leave it until it
reaches ambient temperature.
Prior to switching the indicator on let
it reach room temperature (estimated
stabilization time: 8 hours).
Connect the power cord to
the mains.
1 2
1
1-8h

PUE HX7
E2R
Towar:
Użytkownik: Suma:
0.00 kg
Tara:
0.00
><
Product:
Operator : Sum :
0.00 kg
0.00 kg
kg
Tare:
PUE HX7
E2R
Weighing
4. PANEL AND SCREEN
4.1. Keypad
4.2. Home Screen
Switching
on / off
Home screen
Log in
Cancel
Keyboard mode
Back / Delete
Zeroing
Taring
Units
Confirm
Working modes
Operation
confirmation or
report printout
Text keypad / Numeric keypad
with navigation keys
Bar graph
Programmable
buttons
Programmable
workspace
Weighing result
window
Status bar
Working mode
parameters
Lot numberSelect
product
Delete
statistics
Databases

A list of operators is displayed. Press keys
to select “Administrator” and press key to
confirm.
Press key to open „Operator” menu.
5. SETTINGS
5.1. Administrator’s Logging In
1 2
Some scale settings are only available to the Administrator.
Prior to setting scale parameters log in as the Administrator.
0.00
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE HX7
E2R
Weighing
Operator
Log out
Admin
Working Modes
Weighing
Checkweighing
Dosing
0.00
><
Product:
Operator: Sum:
0.00 kg
0.00 kg
kg
Tare:
PUE HX7
E2R
Weighing
0.00
><
kg
PUE HX7
E2R
Product:
Operator: Sum:
0.00 kg
0.00 kg
Tare:
Weighing
4.3. Working Modes
4.4. Unit Selection
Weighing
Dosing
Formulations
Percent weighing
Parts counting
Animal weighing
•Gram [g]
•Kilogram [kg]
•Carat [ct]
•Ounce [oz]
•Pound [lb]
•Newton [N]
•Custom unit 1 [U1]
•Custom unit 2 [U2]
Press key to enter Working Modes
menu.
Using keys select working mode and press
key to confirm.
Press key to change the mass unit.
The indicator enables selecting the
following mass units:

3 4
When the field for filling the password in is opened,
confirm the empty field by pressing key.
You have logged as the administrator.
Operator
0.00
><
Towar:
Użytkownik: Suma:
0.00 kg
0.00 kg
kg
Tara:
PUE HX7
E2R
•Gram [g]
•Kilogram [kg]
•Carat [ct]
•Ounce [oz]
•Pound [lb]
•Newton [N]
•Custom unit 1 [U1]
•Custom unit 2 [U2]
6. CONNECTING PERIPHERALS
100-240VAC
50/60Hz 0,2A VENT USB (2) RS 232 (1) RS 232 (2) RS 232 (3) RS 485 PLATFORM 1
4 IN OUT IN
USB (1) ETHERNET
PLATFORM 24 OUT
15
1
14
2
13
3
12
4
11
5 6
10
7
9
8
1Power cord cable gland
2Valve
3USB 2 M12 4P connector (option)
4RS232 M12 8P connector
5RS232 M12 8P connector (option)
6RS232 M12 8P connector (option)
7RS485 M12 8P connector (option)
8Cable gland for a cable of a weighing platform
9Cable gland for a cable of a weighing platform 2 (option)
10 ETHERNET RJ45 connector
11 USB connector
12 IN connector for additional interfaces (PROFIBUS)
13 OUT connector for additional interfaces (PROFIBUS, analog outputs)
14 Digital 4OUT M12 8P connector
15 Digital 4IN M12 8P connector

7. CLEANING AND MAINTENANCE
Avoid using aggressive cleaning
agents (e.g. solvents, cleansers
containing chlorine, corrosive
substances and bleach).
• STAINLESSSTEELELEMENTS,ALUMINUMcanbecleanedwithasoftclothslightlymoistenedwithasolutionofwater
and a mild detergent (e.g. soap or dishwashing liquid).
• Plastic elements can be cleaned with a soft cloth slightly moistened with a solution of water and a mild detergent
(e.g. soap or dishwashing liquid).
•Drycleanedelementsusingsoftanddryclothorusedust-freepapertoweltoabsorbtheremainingmoisture.
•Donotinstallthecomponentsuntiltheyarecompletelydry.
Avoid using cleansers containing
abrasive substances or scouring
preparations.
Avoid using intense water jet for
cleaning.
7.2. Cleaning Tips
Prior to cleaning it is necessary
to disconnect the indicator from
the mains. Unplug the connector
from the electrical socket. Unused
communication interfaces must be
covered with hole plugs.
For cleaning use only soft cloths made
of microfiber. Do not use any abrasive
cloths or any material that may scratch
the surface!
Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device!
7.1. Notes and Warnings

www.radwag.com