Raidon SAFETANK GT4670-TB User manual

!
SafeTANK
GT4670-TB
User Manual

SafeTANK GT4670-TB User Manual
!
2
» SafeTANK GT4670-TB User Manual ..........................................................3
» SafeTANK GT4670-TB Bedienungsanleitung ...............................................19
» SafeTANK GT4670-TB 產品使說明 ............................................................35
» SafeTANK GT4670-TB 사용 설명서 ..........................................................51

SafeTANK GT4670-TB User Manual
!
Thank you for purchasing RAIDON products. This manual will introduce the GT4670-TB.
Before using your GT4670-TB, please read this manual thoroughly. Although all information
contained in this user manual has been carefully verified before publishing, however, the
actual product specification will be based on the time of delivery from RAIDON. Any updates
to the product specifications or relevant information may be found on www.raidon.com.tw.
Products are subject to change without prior notifications.
If you have any questions regarding the products of RAIDON, or you would like to know the
latest product information, user manual update, or firmware update, please contact your local
supplier or visit www.raidon.com.tw for further information.
!
Copyright © RAIDON TECHNOLOGY, INC. All rights reserved.
!
!
!
1. Operating Information
2. Package Contents and Product Views
3. Hardware Requirements and Precautions
4. Hardware Installation
5. GUI Management Software
6. Visual Status Indicator Definitions
7. Frequently Asked Questions
!
!
!
Operating Temperature : 10 ∼35 ℃(50 ~ 95 ℉)
Storage Temperature : -20 ∼47℃(-4 ~ 116 ℉)
Line Voltage : 100 ∼240V AC
!
!
Open the package and you should find the following:
!
!
Please make sure that the contents listed above are not damaged or missing. If you should
find damages or missing contents, please contact your supplier immediately.
!
!
Introduction
Table of Contents
1. Operating Information
2. Package Contents and Product Views
GT4670-TB
GT4670-TB x 1$
(with removable drive tray enclosed x 4)!
Thunderbolt cable x1
AC Power Cable ｘ1
Accessories Kit
CD ( User Manual / Software ) x 1!
!3

SafeTANK GT4670-TB User Manual
Front and Rear View
!
!
!
!
A. Hard drive status indicator
B. Removable drive tray
C. Key access opening
D. Power indicator
E. Power Switch
F. Power socket
G. Thunderbolt
H. Anti-theft cord slot
!
!
!
!
!
!
1. Please make sure that the hard drives are free from bad blocks or defects prior to
installation in order to avoid system crashes or data loss.
2. Whenever turning off or unplugging the GT4670-TB from your computer system
becomes necessary, always remember to safely remove it from your operating system
first.
3. When the GT4670-TB is connected to the computer system, it’s prohibited to remove,
insert or swap the hard drive while data transfer is being performed.
4. If you will be incorporating either software or hardware RAID functionality to operate with
the GT4670-TB, it is important to understand the RAID level and its component that will
be incorporated and the precautions to take as each RAID level and component may
function differently and contains various limitations.
5. It is highly recommended for users to back up important data contained within the drives
of the GT4670-TB on a regular basis or whenever the user feels necessary to a remote
or a separate storage device. RAIDON will not be responsible for any lost of data caused
during the use of the GT4670-TB or the recovery of the data lost.
!
!
!
!
!
!
!
!
!
!
!
!
3. Hardware Requirements and Precautions
!4
Please ensure each plug is properly
connected before turning on the power.
CAUTION
H

SafeTANK GT4670-TB User Manual
!
Please follow the instructions below to complete the hardware installation.
!
Step 1 Open the package and take out the product making sure that all the enclosed contents
are not damaged or missing. Should you find damages or missing contents, please
contact your supplier immediately.
Step 2 Place the enclosure on a stable surface, ensure that it is well ventilated without
blockage to the vent and kept away from locations near water or where the product
may become vulnerable resulting in damages.
Step 3 Use the provided key in the accessories kit and inserted into the key access opening
to eject the removable drive tray latch and extract the removable drive tray.
Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws
included in the accessory kit to avoid any damage to the hard drive due to accidental
movements.
Step 5 Choose one of the provided cables of your preference to connect the preferred
interface connection on the enclosure unit to the computer.
Step 6 Attach the AC power cable to the power socket. Once completed, you may power on
the unit.
!
Once your computer has also booted, your operating system should recognize the drive
automatically. If the hard drive installed requires formatting, follow the formatting instructions
given by the operating system to format the drive volume to your preference. Once the
formatting has been completed, the device is ready for use.
!
!
!
!
!
!
!
!
!
!
!
!
4. Hardware Installation
!5

SafeTANK GT4670-TB User Manual
!
1. Installation of Monitoring Software
Please install from product CD in the accessory package or download it from
www.raidon.com.tw.
Step 1. Select “Security & Privacy” under “System Preferences”.
!
!
Step 2. Click on the lock icon from the bottom-left corner to unlock settings under “General”.
!
!
5. GUI Management Software
!6

SafeTANK GT4670-TB User Manual
Step 3. Insert your “Username” & “Password” for the computer.
!
!
Step 4. Select “Allow From Anywhere” for App downloads.
!
Step 5. Click on the lock icon from the bottom-left corner to lock settings.
!
!7

SafeTANK GT4670-TB User Manual
Step 6. Run MSU application to proceed installation for “Introduction” > “License” >
“Destination Select” > “Installation Type” > “Installation” > “Summary”, and please click on
“Continue” for “Introduction”.
!
!
Step 7. Please click on “Continue” for “License”.
!
!
!
!
!
!
!
!8

SafeTANK GT4670-TB User Manual
Step 8. Please click on “Agree” in the popped-up dialogue of “License” to continue.
!
!
Step 9. “Installation Type” indicates the size of space will occupy, please click on “Install”.
!
!
!
!
!
!
!
!
!
!
!9

SafeTANK GT4670-TB User Manual
Step 10. Insert your “Username” & “Password” for the computer then please click on “Install
Software” to continue.
!
!
!
!
!
Step 11. Software installation completed, please click on “Close” button to exit installation.
!
Step 12. Please launch the monitoring software after restarting the computer from software
installation.
!
!
!
!
!
!
!10

SafeTANK GT4670-TB User Manual
2. Operation of Monitoring Software
Before operating MSU, please verify GT4670-TB has already connected to the computer with
HDD installed and powered on.
Please choose enterprise standard HDD for surveillance with identical brand and capacity.
!
Step 1. Insert your “Username” and “Password” for the computer.
!
!
Step 2. 3 setting options can be found on the left of managing window as for “Marvel Storage
Management”, “Device” and “Management”.
Marvel Storage Management: Host Name, IP address and MSU version.
Device: RAID configurations and information of installed HDD
Management: Configurations of E-Mail notification for incidents.
!
!
!
!
!11

SafeTANK GT4670-TB User Manual
3. RAID Settings
A. If installed HDD was used for RAID on other devices, please assure that previous RAID
info in HDD has been successfully removed/erased and HDD has been reformatted.
B. Please backup all data before configuring/changing to desire RAID mode.
C. JBOD: To use individual capacity of each installed HDD.
D. RAID-0: Only enhances the performance of data accessing, it does not provide backup/fail-
safe for stored data.
!
Step 1. Please select “Device” > “Adapter” > “Operation” > “Create RAID”.
!
!
Step 2. Choose for desired RAID level.
!
!
!
!
!
!12

SafeTANK GT4670-TB User Manual
Step 3. Please select desired HDD(s) for proceeding with RAID configuration.
!
!
Step 4. Please verify RAID level and number of HDD selected are indicated correctly, and
then click on “Next” to continue.
!
!
!
!
!
!
!
!
!
!13

SafeTANK GT4670-TB User Manual
Step 5. Please verify selected RAID level and relevant information are indicated correctly, and
then click on “Sumbit” to continue.
!
!
Step 6. Click for confirmation in the popped-up dialogue to proceed with selected RAID level.
!
!$
!
!
!
!
!
!
!
!
!
!14

SafeTANK GT4670-TB User Manual
Step 7. RAID level completed
The naming sequences of adapter set assigns from “Adapter 0”, ”Adapter 1”…to ”Adapter 5”,
and GT4670-TB may adopt maximum of 6 sets.
RAID: Default name is “VD_R0_1”. The options in the top-right corner may apply for “Modify”
or “Restore”.
HDD ID: Each set of HDDs within will be indicated as 0, 1, 2 and 3.
!
4. Deletion of RAID
Please backup stored data before deleting RAID, once RAID been deleted all data within shall
be erased.
$
Step 1. On the left of managing window, please select the “Virtual Disk” from a RAID set
which wish to be deleted.
The option for “Delete” will appear once click the “Operation” tab on the right of managing
window.
!
!15

SafeTANK GT4670-TB User Manual
Step 2. Confirmation dialogue will appear for deletion.
!
!
Step 3. Second confirmation dialogue will appear to proceed with delete.
!
!
!
!
!
!
!
!
!
!
!
!
!
!16

SafeTANK GT4670-TB User Manual
Step 4. Final confirmation dialogue will appear to delete partition information.
!
!
Step 5. After RAID has been deleted, each of the HDD will revert to original connecting status
individually.
!
5. E-Mail Notifications.
Step 1. “Account Management” under “Management” on the left of managing window allows
configuring for e-mail notification by sending “Event Logs” which generated during the
operation of GT4670-TB.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!17

SafeTANK GT4670-TB User Manual
!
!
!
!
1. GT4670-TB will goes into sleep mode when Thunderbolt cable is not connected, while fan
and LED indication of GT4670-TB will not be functioning until connecting with Thunderbolt
cable.
2. When GT4670-TB goes into sleep mode that fan and LED indication of GT4670-TB will
not be functioning, until GT4670-TB has been reactivated.
3. If HDD was used for RAID in other devices, please revert the HDD to JBOD mode using
original device/software before install in GT4670-TB.
4. If monitoring software is being active for a period of time without accessing, please
proceed with refreshing or restarting the software for acquiring an updated status.
5. If an older version of Marvell monitoring software has already been installed in the
computer, please remove it completely before installing the monitoring software from
product CD to avoid the occurrence of software corruptions.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
6. Visual Status Indicator Definitions
Status
Power LED
HDD LED
Power on / NO HDD
Blue On
N / A
Power on / HDD Idle
Blue On
Blue On
Power on / HDD Access
Blue On
Blue Blinks
Power on / HDD Fail
Blue On
N / A
7. Frequently Asked Questions
!18

SafeTANK GT4670-TB User Manual
!
!
Vielen Dank für den Kauf eines RAIDON Produkts. Dieses Bedienungsanleitung beschreibt
das RAIDON GT4670-TB Produkt. Bevor Sie dieses Produkt benutzen, lesen Sie diese
Anleitung bitte sorgfältig durch. Obwohl alle Informationen in dieser Anleitung vor der
Veröffentlichung sorgfältig überprüft wurden, beziehen sich die tatsächlichen
Produktspezifikationen auf die Zeit der Auslieferung durch RAIDON. Aktualisierungen der
Produktspezifikationen können auf der Webseite www.raidon.com.tw gefunden werden.
Änderungen der Produkte ohne vorherige Nachricht vorbehalten. Wenn Sie Fragen zu den
Produkten von RAIDON haben, oder mehr über die aktuellsten Produktinformationen,
Aktualisierungen der Bedienungsanleitung oder Firmware updates erfahren möchten,
kontaktieren Sie bitte Ihren Händler vor Ort oder besuchen Sie www.raidon.com.tw für weitere
Informationen.
Copyright © RAIDON TECHNOLOGY, INC. All Rechte vorbehalten.
!
!
!
1. Betriebsinformationen
2. Lieferumfang und Produktansichten
3. Hardware-Anforderungen und Vorsichtsmaßnahmen
4. Hardware Installation
5. GUI-Management-Software
6. Beschreibung der visuellen Statusanzeige
7. Oft gestellte Fragen
!
!
Betriebstemperatur : 10 ∼35 ℃(50 ~ 95 ℉)
Lagertemperatur : -20 ∼47℃(-4 ~ 116 ℉)
Spannung : 100 ∼240V AC
!
!
Öffnen Sie das Paket und Sie sollten die folgenden Dinge vorfinden:
Bitte stellen Sie sicher, dass die oben aufgelisteten Inhalte nicht beschädigt sind oder fehlen.
Falls Schäden oder fehlende Inhalte festgestellt werden, kontaktieren Sie bitte umgehend
Ihren Händler.
Über diese Anleitung
Inhaltsverzeichnis
1. Betriebsinformationen
2. Lieferumfang und Produktansichten
GT4670-TB
GT4670-TB x 1$
( mit integriertem Wechselrahmen x 4 )!
Thunderbolt-Kabel x 1!
Stromkabel x 1
Zubehörset
CD ( Bedienungsanleitung / Software ) x 1!
!19

SafeTANK GT4670-TB User Manual
Front and Rear View
!
!
!
!
A. Festplatten-Statusanzeige
B. Wechselrahmen
C. Schlüsselzugangsöffnung
D. Netzanzeige
E. Netzschalter
F. Netzbuchse
G. Thunderbolt Anschlüsse
H. SteckplatzfürKensingtonschloss
!
!
!
!
!
1. Bitte stellen Sie sicher, dass die in den Wechselrahmen zu installierende Festplatte keine
fehlerhaften oder defekten Sektoren aufweist, um einen Systemabsturz oder Datenverlust
zu vermeiden.
2. Wann immer ein Ausschalten oder Abtrennen des GT4670-TB von Ihrem Computersystem
notwendig wird, denken Sie immer daran, es zunächst sicher aus Ihrem Betriebssystem
zu entfernen.
3. Während der Verbindung mit dem Computersystem ist ein Entfernen, Einlegen oder
Austauschen der Festplatte zu vermeiden, wenn ein Datentransfer ausgeführt wird.
4. Wenn Sie eine Software oder Hardware mit RAID Funktionalität für den Betrieb mit dem
GT4670-TB einsetzen, ist es wichtig die verschiedenen RAID Level und die zum Einsatz
kommenden Komponenten sowie die zu ergreifenden Vorsichtsmaßnahmen zu kennen,
da jedes RAID Level und jede Komponente anders funktioniert und verschiedene
Limitierungen enthalten kann.
5. Es wird dringend empfohlen, alle auf dem Laufwerk im GT4670-TB befindlichen Daten
regelmäßig oder wenn immer es der Benutzer für nötig hält auf einem fern gewarteten
oder externem Speicherlaufwerk zu sichern. RAIDON ist weder verantwortlich für
Datenverluste, die während der Benutzung des GT4670-TB Geräts entstehen, noch für
die Wiederherstellung verlorener Daten.
!
!
!
!
!
!
!
!
!
!
3. Hardware-Anforderungen und Vorsichtsmaßnahmen
!20
Please ensure each plug is properly
connected before turning on the power.
CAUTION
H