RCA Prodigi RDR1520 Series User manual

Communications Systems
RDR1520TM
Digital Radios QUICK START GUIDE
B1520LI
Li-Ion Battery
(2000 mAh)
CH1521*
Desktop Rapid Charger
PS1521*
Power Supply
BC1520
Belt Clip
Antenna
ANH1520U - UHF models
ANH1520V - VHF models
*Items sent in separate box if ordered.
RDR1520TM
Handheld Radio
What’s Included:
Attaching the Battery: Attaching the Antenna:
Attaching Belt Clip:
Charging the Battery:
Connecting the Charger:
Line up battery guide slots and
slide into place until it locks in.
Plug power supply into the outlet
and connect the other end to
charger base.
Be sure radio is
off, line up screw
threads and twist
antenna clockwise
until it is secure.
Slide battery into the charging
base with or without the
radio attached. Secure battery
in place, Red LED will be on
when charging.
Align the screw
holes and use a
small screwdriver
to fasten screws.
ATTENTION:
• Remove Battery
• Do Not Use
Power Tool
• Use Screwdriver
Only
Note: Charge a new battery 12 to 14 hours before initial use
for best performance. Maximum battery capacity is normally
achieved after two or three full charge / discharge cycles.

RDR1520 Configuration:
Antenna
Channel Knob
LED Indicator
On/Off/Volume Knob
Speaker
Microphone
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*These buttons are
programmable by your
RCA Communications
Systems Dealer only
upon request at the
time of purchase.
Download Complete Manual at: RCACommunicationSystems.com/support
For Sales, Warranty and Customer Support please contact:
Discount Two-Way Radio Corporation – North American Distributor
555 W. Victoria Street, Rancho Dominguez, CA 90220
Phone: [phone] / Fax: [phone] / www.discounttwo-wayradio.com
Screw-On Belt Clip
Push-to-Talk (PTT) Button
Side Button 1*
Side Button 2*
Audio Accessory Connector
Micro-USB (for charging & programming)
Battery
Battery Charging Contact Points
13
24
5
7
6
11
12
13
14
8
9
10