real living WHITMORE GBO23-912C User manual

WHITMORE 2PC ALL WEATHER WICKER BOHO CHAIRS
WITH CUSHIONS
ASSEMBLY INSTRUCTIONS
ITEM# : GBO23-912C
SKU# : 810580881
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [email protected],[email protected]
[email protected]

GENERAL BEST PRACTICES FOR ASSEMBLY:
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
WARNINGS:
Use the correct screws as indicated. All screws should be hand tightened until the complete piece is
assembled ( This will make the assembly process much easier ). Once the piece is fully assembled, then go
back and tighten all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the
product construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or
electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The products are not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
The chair is used at weight of 250lb (113kg). Improper use of this product or failure to use as directed may
result in injury. Not intended for commercial use.
MAINTENANCE
STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE ON RAINY DAYS.
SPILLS: Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone.
Allow cushions to air dry.
FABRIC CARE: Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.

PARTS LIST FOR 1 CHAIR
A B C
1PC Seat Frame 1PC Seat Cushion 4PC Chair Leg
HARDWARE LIST FOR 1 CHAIR
D
E
F
12PC Screw(φ
6x16mm)
12PC Washer 1PC Allen Wrench
STEP 1
Secure 4 chair legs (C) to 1 seat frame (A) by using 12 screws
(D) and 12 washers (E) with allen wrench (F). Match Legs (C)
with the number sticker of seat frame (A). Do not fully tighten all
screws now.
C
A
C
F
E
D
C
C

STEP 2
FULLY TIGHTEN ALL SCREWS NOW.
Put 1 seat cushion (B) on the chair.
The chair is assembled.
Warranty
One year limited warranty.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
B