real living BQ092-1704AC User manual

l i v i n gTM
CANE TWO DOOR CABINET
ASSEMBLY INSTRUCTIONS
ITEM#:BQ092-1704AC/BQ092-1704WH/BQ092-1704BK
SKU#:810529562/810529570/810529571

Page 2 of 8
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Regularly check hardware and tighten if necessary.
Use dry cloth to wipe surface.
Keeping Away from water and fire.
SUGGEST 2 ADULTS TO ASSEMBLE THIS PRODUCT IN AN OPEN AREA.
DO NOT USE POWER TOOLS TO ASSEMBLE
TO PREVENT SERIOUS INJURY OR DEATH, THIS PRODUCT IS EQUIPPED WITH A WALL ANCHORING SYSTEM.
BEFORE THIS PRODUCT CAN BE USED, THE WALL ANCHORING SYSTEM MUST BE INSTALLED AS DIRECTED IN
THE ASSEMBLY INSTRUCTIONS.
Read all instructions before starting
Clear a flat covered space to begin
Two adults are recommended for assembly
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its number in the package
Helpful hints provided along the way

Page 3 of 8
NO QTY DESCRIPTION
A 1pc
B1pc
C1pc
D1pc
E1pc
F 2pcs
G 1pc
PARTS LIST
Top Panel
Left Side Panel
Right Side Panel
Under Top Slat
Inner Shelf Panel
H 1pc
I 2pcs
J 1pc
Back Panel
K2pcs
L4pcs
A
F
F
J
I
I
B
C
D
G
E
H
LL
L
L
KK
Hinge
Metal Handle
Plastic Slat
Door Panel
Bottom Panel
Bottom Trim Panel

Page 4 of 8
Shelf Support
Screw(4×12mm)
Screw(4×20mm)
Screw(4×45mm)
Screw(4×35mm)
4
5
6
24pcs
4pcs
Wooden Dowel
36pcs
4pcs
4pcs
1pc
4pcs
7
8
9
HARDWARE LIST
Cam Lock
Cam Bolt
NO QTYPARTS DESCRIPTION
1 6pcs
26pcs
10 4pcs
11 2pcs
Bolt(6×40mm)
Bolt(4×22mm)
Nut
12 4pcs
13 2pcs
PVC Sticker
Sticker
2pcs
1pc
4pcs
14
15
16
17 4pcs
18 4pcs
Allen Wrench
Anchor Bracket
Plastic Lock Strap
Rubber Feet Sticker
Plastic Plugs

1
1
22
10
10
10
10
2x
2
Page 5 of 8
HOW TO INSTALL THE CAM BOLT AND CAM LOCK
a b c
1
1x
2
HELPFUL HINTS
•A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
•Separate all parts before starting.
10 x4
Important: Press a nut into the hole
in the part, making sure the “-“ pattern
is facing up.
!
Important: Using a standard screw
driver, turn the nut until the “-” is
inline with the hole for the bolt.
!
HOW TO INSTALL NUTS
H
H
H
2
GG
1. Insert Cam Bolt (1) into Bottom Trim Panel (G),
fully tighten.
2. Align the Cam Bolts (1) in Bottom Trim Panel (G)
with the holes in the edge of Bottom Panel (H)
and slide into place.
3. Secure the Panels together using Cam Lock (2).
Insert Nut (10) into the holes of Bottom Panel (H).
TIP: The line on top of Nut (10) must be in line with the bolt.

Page 6 of 8
3
3
3
3
9
1
1
33
1
1
9
9
9
9
15
18
4
18 x
4
5
3x 2
3x4
3
2x 4 8x 1
1x 4
9x415 x1
A
AA
F
B
B
B
BB
C
C
C
C
C
H
D
D
D
F
F
J
J
F
8
22
22
1. Insert Wooden Dowel (3) into the end of Bottom Trim Panel (G) and Under Top Slat (D).
2. Align the Wooden Dowels (3) in the end of Bottom Trim Panel (G) and Under Top Slat (D) with the holes in
the leg of Left Side Panel (B) and Right Side Panel (C) and slide into place. Secure the panels together with
Allen Bolt (9) using Allen Wrench (15).
3. Apply the Rubber Feet Sticker (18) to the bottom of each leg.
G
1. With assistance, carefully tip the assembled
panels upright.
2.Slide one of the Back Panel (F) into the
grooves of Left Side Panel (B), Right Side
Panel (C) and Bottom Panel (H).
3. Slide the Plastic Slat (J) onto the inserted
Back Panel (F).
4. Slide the other Back Panel (F) into the
grooves of Left Side Panel (B), Right Side
Panel (C) and Plastic Slat (J).
H
1. Insert Cam Bolt (1) into Top Panel (A), fully tighten.
2. Align the Cam Bolts in Top Panel (A) with the holes in the Left Side Panel (B) and Right Side Panel (C) and
lower into place.
3. Secure the Top Panel (A) to the side panels with Cam Locks (2).
4. Secure the Under Top Slat (D) to Top Panel (A) with Screw (8).

Page 7 of 8
5
5
16
64x
4
b
cd
a
B
B
C
C
85x
16
4
4
4
4
4
E
16 x 2
16
I
I
1. Insert the Shelf Support (4)
into the pre-drill holes in Left
Side Panel (B) and Right Side
Panel (C).
2. Place the Inner Shelf Panel (E)
onto the Shelf Support (4).
11
11
5
5
5
5
5
5
L
7
5x 8 11 x 2
L
L
K
×2
×2
I
I
K
1. Attach Hinges (L) to Door Panel (I) with Screw (5).
2. Attach Metal Handle (K) to each door with Bolt (11).
1. Attach Door Panel (I) onto the Left Side Panel (B) and Right Side Panel (C)
with Screw (5).
Note: The back edge of the door should be in line with the inside edge of
the trim panel. Attach Hinge (L) with Screw (5) only using the back upper
and back lower holes in the hinge at this time. Make sure the screws are at
the top of the hole opening. Once both Hinges (L) are attached, slightly
loosen the screws and adjust the door so it is in the middle of the opening
Fully tighten the screws. Insert screws (5) into the front holes of Hinge (L)
and fully tighten.
2. Apply Sticker (16) to the front edge of Inner Shelf Panel (E).
TIP: To adjust the vertical gaps between the doors, loosen or tighten the screw shown in Diagram C. To adjust
the door so it is flush with the trim panels, loosen the screw in Diagram B. Adjust the hinge until the door is
flush, then retighten the screw.
E

Page 8 of 8
A
A
10
96x 4 12 x 2 17 x 4
B
B
C
C
12
17
17
12
12
7
12
12
12
12 7
7
7
7
14
14
14
13
13
13
14
14
14
14
17
17 17
17
12
12
6
6
6
66
6
step 2 step 3
step 4 step 5 step 6
A
A
step 1
7x
412 x 2
13 x 2
14 x 4
1. With assistance, align the holes in Top Panel (A) with the holes in Anchor Bracket (12). Attach Anchor
Bracket (12) using Screw (6). Fully Tighten screws.
2. Cover the visible bolts in the side panels with PVC Sticker (17).
1. Place the assembled Cabinet in the desired position.
Mark where the Anchor Brackets (12) on the Cabinet
meet the wall. Remove the Cabinet.
2. Place one of the remaining Anchor Brackets below
the mark on the wall. Mark the position of the holes in
the Anchor Bracket (12) on the wall.
3. Drill holes in the marked position.
4. Insert the Plastic Plugs (14).
5. Attach the Anchor Bracket (12) to the Plastic Plugs (14)
with Screw (7). Fully tighten screws. Repeat process for
remaining Anchor Bracket (12).
6. Return the Cabinet to the desired position and attach
the Anchor Brackets (12) together with Plastic Lock
Strap (13).
Assembly is now complete.