real living CYPRESS LAKE SC-K-117SFE/5C User manual

TM
CYPRESS LAKE 5 PIECE
SEATING SET, CREAM
ASSEMBLY INSTRUCTION
ITEM#: SC-K-117SFE/5C
SKU# 810557334
Big Lots Stores, Inc. P.O. Box 28523; Columbus, OH 43228-0523 / Made In China
Need help? We are here for you!
Please contact 1-800-457-4652 or contact us at
www.numarkcustomerservice.com for assistance
TM
1

MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
* Determine you have adequate space for assembly from any obstruction, including buildings, tree limbs,
and electrical wires.
* Assembly by two adults is recommended
* Keep children away during assembly. This item contains small parts which can be swallowed by children. Children
should always be under adult supervision while using this product.
* Always inspect the furniture during each use for any obstructions.
* Do not discard any of the packaging until you have checked that you have all the parts and fittings.
* Retain the assembly instructions for future reference.
* The manufacturer will not accept responsibility for unauthorized repairs or modifications to this product.
Weight limit: Chair is 250lbs; Ottoman is 250lbs; table is 50lbs.
This product is for residential use only, not for commercial use.
Do not stand on product or use as a step ladder.
For optimum safety, use on even surface only!
Improper use of this product or failure to use as directed may result in injury.
* Annually:
* Check all nuts and bolts for tightness each season and more often if used frequently.
* Oil all metal moving parts with a general purpose lubricating oil to ensure proper performance and safety.
* To clean, wash frame and fabric with mild soap and water; rinse thoroughly. Dry frame completely
and allow the fabric to drip dry away from direct sunlight.
* Do not use bleach, acid, or other solvents on the fabric or frame parts.
* To prolong the life of your furniture we recommend storage in a dry area when not in use or during
austere weather conditions.
2

PARTS LIST
HARDWARE LIST
BCD
EFGH
I
A
x 1
Tabletop (16 Metal Washers
and 16 Bolts attached)
x 4
Table Leg
x 2
Left Arm
x 2
Right Arm
x 2
Seat
x 2
Back
x 2
Ottoman Frame
x 2
Seat and Back Cushion
x 2
Ottoman Cushion
Ja Jc Jd
Je
x 1 spare
Short Bolt
Jb
x 16 + 1 spare
Medium Bolt
x 4
Long Bolt
x 16
Metal Washer
x 1
Allen Wrench
3

STEP 1
A
B
Ja
Jd
Jd
x16 x16
Ja
(remove from
the tabletop)
(remove from
the tabletop)
Attach 1 table leg (B) to the table top (A) with 4
short bolts (Ja) and 4 metal washers (Jd) which
removed from the table top.
Do not tighten completely.
Repeat procedure for the other three legs.
STEP 2
Turn the table over. Securely tighten all bolts.
Readjusting level by twisting knobs on the bottom
of legs as desired.
4

STEP 3
C
D
E
Jb
Jd
Jd
x4 x4
Jb
Attach the right arm (D) to the seat (E) with 2
medium bolts (Jb) and 2 metal washers (Jd).
Do not tighten completely.
Repeat procedure for the other arm.
C
D
E
Jb
Jd
STEP 4
Jd
x2 x2
Jb
Attach the right arm (D) to the seat (E) with 1
medium bolt (Jb) and 1 metal washer (Jd).
Do not tighten completely.
Repeat procedure for the other arm.
5

STEP 5
C
EF
D
Jb
Jd
E
F
Jd
x2 x2
Jb
Attach the back (F) to the seat (E) with 1
medium bolt (Jb) and 1 metal washer (Jd).
Do not tighten completely.
Repeat procedure for the other side.
STEP 6
F
C
D
Jc
x2
Jc
Attach the back (F) to the arm (D) with 1 long
bolt (Jc).
Do not tighten completely.
Repeat procedure for the other side.
6

STEP 7
H
Put the cushion (H) on the chair frame.
Securely tighten all bolts.
Repeat procedure for the other chair.
STEP 8
G
I
Put the cushion (I) on the ottoman frame (G).
Repeat procedure for the other ottoman.
7