Rear view safety RVS-112 User manual

Backup Sensor Reversing System
RVS-112
Instruction Manual
Rear View Safety, Inc. © 2016
A Safe Fleet Brand

Rear View Safety
2
SystemDiscription............................03
Safety Information...........................04
Before Beginning Installation. . . . . . . . . . . . . . . . . . . . . . . 05
Installation........................... 06-07
Wiring Diagram.............................8
Specications..............................9
Warranty&Disclaimer........................ 10-11
TABLE OF CONTENTS

Reverse With Condence ™ 3
The RVS-112 is the simplest sensor system on the market today.
SYSTEM DESCRIPTION
The RVS-112 Vehicle Reversing Aid is an automatic back up alert system that
warns drivers of potential obstacles while backing up their vehicle. Using ultra-
sonic echo location sonar technology the system is activated when the driver
engagesreversegear.A4zonevariableaudiopulsealerts the driverofpotential
obstacles.The audio pulse intensity increases and the audio frequency changes
as the vehicle backs closer to the obstacle. As with all sensing systems there
are blind areas in the sensing patterns due to the cone or triangular nature in
the way the sonar pulse is emitted. Whenever an object moves from a covered
area and into one of these blind areas a special warning alert message and a
very loud tone will be transmitted twice or until the operator takes the vehicle
out of reverse. This is especially helpful for detecting moving objects such as a
pedestrian, an animal, a forklift or other moving vehicles that may be behind
your vehicle and in harms way.

Rear View Safety
4
If you have questions about this product, contact:
Rear View Safety
1797 Atlantic Avenue
Brooklyn, NY 11233
Tel: [phone]
IN NO EVENT SHALL SELLER OR MANUFACTURER BE
LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
SAFETY BASICS
A Safe Fleet Brand

Reverse With Condence ™ 5
PLEASE READTHE ENTIRE MANUAL AND FOLLOWTHE INSTRUCTIONS AND
WARNINGS CAREFULLY. FAILURE TO DO SO CAN CAUSE SERIOUS DAMAGE
AND/OR INJURY, INCLUDING LOSS OF LIFE. BE SURE TO OBEY ALL APPLI
CABLE LOCALTRAFFICANDMOTORVEHICLEREGULATIONSAS IT PERTAINS
TO THIS PRODUCT. IMPROPER INSTALLATION WILL VOID
MANUFACTURER’S WARRANTY.
Before drilling please check that no cable or wiring is on the other side
of the wall. Please clamp all wires securely to reduce the possibility
of them being damaged while vehicle is in use. Keep all cables away
from hot or moving parts and electrical noisy components.
We recommend doing a benchmark test before installation
to insure that all components are working properly.
BEFORE YOU BEGIN

Rear View Safety
6
INSTALLATION
Sensors
Drill four holes at equal distance in the rear bumper and mount
the sensors using the included grommets. Run each cable to the
sensor box and plug each into its corresponding port. Note: Drill Bit
not included.
Power
Connect the power wires (red, orange, black) into the“BZ/DC”port
on the sensor box. Connect the ORANGE wire to a 12V constant power
and the RED wire to a 12V reverse power. Connect the BLACK wire to
a chassis ground.
Y-Adapter
Thesensorsintegrateintothebackupcamerasystemsandusethesame
cable to run through the vehicle to the monitor. Connect theY-Adapter
between the camera and the camera cable and plug the sensor con-
nection into the“DSP”port on the sensor box.
The Multiplexer
The cable that runs through the vehicle now carries signals both from
the backup camera and the sensors. Plug this cable into port #3 in the
Multiplexer. In order to hear the sensor audio alerts, connect the blue
trigger wire (coming o the multiplexer) to 12V reverse power.

Reverse With Condence ™ 7
INSTALLATION DIAGRAM

Rear View Safety
8
WIRING DIAGRAM

Reverse With Condence ™ 9
SPECIFICATIONS
SENSORS
4 ACOUSTIC, FLUSH MOUNT, WEATHERPROOF
DIMENSION 8MM DIAMETER X 5MM
DETECTING ANGLES
HORIZONTAL APPROXIMATELY 30 DEGREES
VERTICAL APPROXIMATELY 50 DEGREES
DETECTION RANGE 12 INCHES TO 7FEET
SPEAKER
TYPE 40MM DIAMETER MAGNETIC
SOUND OUTPUT 80 DB AT 10 CM
POWER SPECIFICATIONS
51 – 11 TUPNI VOLTS DC
SOUND OUTPUT 3.0 W
ENVIRONMENTAL SPECIFICATIONS
OPERATING TEMPERATURE 122F TO F4-
PHYSICAL SPECIFICATIONS DIMENSIONS
PROCESSOR 4.25 IN X 2.83 IN X 1.23 IN
SENSOR 0.82 IN DIAMETER X 0.51IN
SPEAKER 2.00 IN DIAMETER X 0.75 IN
VOLUME CONTROLLER 1.70 IN X 0.51 IN X 0.40 IN
CABLE LENGTH
SENSOR CABLES 8 FT, POWER WIRES 6FT, SPEAKER CABLE 5FT
VOLUME CONTROLLER 15F

Rear View Safety
10
ONE YEAR WARRANTY
REAR VIEW SAFETY, INC. WARRANTS THIS PRODUCT AGAINST MATERIAL DEFECTS FOR A
PERIOD OF ONE YEAR FROM DATE OF PURCHASE. WE RESERVE THE RIGHT TO REPAIR OR
REPLACE ANY SUCH DEFECTIVE UNIT AT OUR SOLE DISCRETION. REAR VIEW SAFETY, INC.
IS NOT RESPONSIBLE FOR A DEFECT IN THE SYSTEM AS A RESULT OF MISUSE, IMPROPER
INSTALLATION, DAMAGE OR MISHANDLING OF THE ELECTRONIC COMPONENTS. REAR VIEW
SAFETY, INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES OF ANY KIND.
THIS WARRANTY IS VOID IF: DEFECTS IN MATERIALS OR WORKMANSHIP OR DAMAGES
RESULT FROM REPAIRS OR ALTERATIONS WHICH HAVE BEEN MADE OR ATTEMPTED BY
OTHERS OR THE UNAUTHORIZED USE OF NONCONFORMING PARTS; THE DAMAGE IS DUE
TO NORMAL WEAR AND TEAR, THIS DAMAGE IS DUE TO ABUSE, IMPROPER MAINTENANCE,
NEGLECT OR ACCIDENT; OR THE DAMAGE IS DUE TO USE OF THE REAR VIEW SAFETY, INC.
SYSTEM AFTER PARTIAL FAILURE OR USE WITH IMPROPER ACCESSORIES.
WARRANTY PERFORMANCE
DURING THE ABOVEWARRANTY PERIOD, SHOULD YOUR REAR VIEW SAFETY PRODUCT
EXHIBIT A DEFECT IN MATERIAL ORWORKMANSHIP, SUCH DEFECTWILL BE REPAIRED WHEN
THE COMPLETE REAR VIEW SAFETY, INC. PRODUCT IS RETURNED, POSTAGE PREPAID AND
INSURED, TO REAR VIEW SAFETY, INC. OTHER THAN THE POSTAGE AND INSURANCE
REQUIREMENT, NO CHARGE WILL BE MADE FOR REPAIRS COVERED BYTHISWARRANTY.
WARRANTY DISCLAIMERS
NOWARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE ABOVEWARRANTY
IS MADEWITH REGARDTOTHIS REARVIEW SAFETY, INC.REARVIEW SAFETY, INC. DISCLAIMS
ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR
PURPOSE AND ALL OTHER WARRANTIES IN NO EVENT SHALL REAR VIEW SAFETY. INC.
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES OR FOR
ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGEDTO BE AS A
CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING,
BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
WARRANTY

Reverse With Condence ™ 11
DISCLAIMER
REAR VIEW SAFETY AND/OR ITS AFFILIATES DOES NOT GUARANTEE OR PROMISE THAT THE
USER OF OUR SYSTEMSWILL NOT BE IN/PART OF AN ACCIDENT OR OTHERWISE NOT COLLIDE
WITH AN OBJECT AND/OR PERSON. OUR SYSTEMS ARE NOT A SUBSTITUTE FOR CAREFUL
AND CAUTIOUS DRIVING OR FORTHE CONSISTENT ADHERENCE TO ALL APPLICABLE TRAFFIC
LAWS AND MOTOR VEHICLE SAFETY REGULATIONS.THE REAR VIEW SAFETY PRODUCTS ARE
NOT A SUBSTITUTE FOR REARVIEW MIRRORS OR FOR ANY OTHER MOTOR VEHICLE
EQUIPMENT MANDATED BY LAW. OUR CAMERA SYSTEMS HAVE A LIMITED FIELD OF VISION
AND DO NOT PROVIDE A COMPREHENSIVEVIEW OFTHE REAR OR SIDE AREA OFTHEVEHICLE.
ALWAYS MAKE SURETO LOOK AROUNDYOURVEHICLE AND USEYOUR MIRRORSTO CONFIRM
REARWARD CLEARANCE AND THAT YOUR VEHICLE CAN MANEUVER SAFELY. REARVIEW
SAFETY AND/OR ITS AFFILIATES SHALL HAVE NO RESPONSIBILITY OR LIABILITY
FOR DAMAGE AND/OR INJURY RESULTING FROM ACCIDENTS OCCURRING WITH VEHICLES
HAVING SOME OF REAR VIEW SAFETY PRODUCTS INSTALLED AND REAR VIEW SAFETY AND/
OR ITS AFFILIATES, THE MANUFACTURER, DISTRIBUTOR AND SELLER SHALL NOT BE LIABLE
FOR ANY INJURY, LOSS OR DAMAGE, INCIDENTAL OR CONSEQUENTIAL, ARISING OUT OF THE
USE OR INTENDED USE OF THE PRODUCT. IN NO EVENT SHALL REAR VIEW SAFETY AND/OR
ITS AFFILIATES HAVE ANY LIABILITY FOR ANY LOSSES WHETHER DIRECT OR INDIRECT, IN
CONTRACT, TORT OR OTHERWISE INCURRED IN CONNECTION WITH THE SYSTEMS,
INCLUDING BUT NOT LIMITEDTO DAMAGED PROPERTY, PERSONAL INJURY AND/OR LOSS OF
LIFE. NEITHER SHALL REAR VIEW SAFETY AND/OR ITS AFFILIATES HAVE ANY
RESPONSIBILITY FOR ANY DECISION, ACTION OR INACTION TAKEN BY ANY PERSON IN
RELIANCE ON REAR VIEW SAFETY SYSTEMS, OR FOR ANY DELAYS, INACCURACIES AND/OR
ERRORS IN CONNECTION WITH OUR SYSTEMS FUNCTIONS.
DISCLAIMER

If you have any questions
about this product, contact:
Rear View Safety, Inc.
1797 Atlantic Avenue
Brooklyn, NY 11233
800.764.1028
Better Cameras. Better Service.
IT’S OUR GUARANTEE.
A Safe Fleet Brand