REED SD-9300 User manual

reedinstruments
www com
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Model
Instruction
Manual
Environment Meter/
Datalogger
SD-9300
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
2
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Table of Contents
Features............................................................................................ 3
Specications................................................................................3-5
Instrument Description ..................................................................... 6
Operating Instructions.................................................................7-12
Function selection.......................................................................... 7
Air velocity/Temperature measurement .......................................... 7
Changing the Air velocity unit......................................................... 7
Humidity/Temperature measurement ............................................. 8
Type K/J Thermometer measurement ............................................ 8
Light Meter measurement.............................................................. 8
Changing the Light Meter unit........................................................ 8
Zero Adjustment ............................................................................ 9
Sound Level measurement ............................................................ 9
Data Hold ...................................................................................... 9
Data Record .............................................................................9-10
Backlight ON/OFF........................................................................ 10
Datalogger................................................................................... 10
Auto Datalogger......................................................................10-11
Manual Datalogger....................................................................... 11
Checking the Time....................................................................... 11
Check Sampling Time Information................................................ 11
SD Card Data Structure............................................................... 12
Data Transfer from SD card to Computer..................................... 12
Advanced Settings ....................................................................13-15
Set Clock Time ............................................................................ 13
Setting the Decimal point on the SD Card.................................... 14
Auto power OFF management..................................................... 14
Set Beeper Sound ON/OFF ......................................................... 14
Select the Thermometer to Type K or Type J ............................... 14
Select the Temperature unit to °C or °F........................................ 15
Set sampling time ........................................................................ 15
SD memory card Format ............................................................. 15
PC Serial Interface.......................................................................... 16
System Reset ................................................................................. 17
Battery Replacement...................................................................... 17
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Features
• Meter functions as a Type K/J Thermometer, Humidity/Temperature
Meter, Anemometer, Light Meter, and a Sound Level Meter (with the
optional adapter)
• Humidity measurements shown in both %RH and Temp
• Anemometer can default the display unit to m/S, FPM, Km/h,
mph, knot
• Light meter can display LUX or Ft-cd
• Real time SD memory card datalogger with a built-in clock and
calendar
• Meter can switch to a Manual Datalogging
• No extra software needed, just plug the SD card into the computer
and it downloads directly to EXCEL
• SD card capacity: 1 GB to 16 GB
• Easy to read LCD with backlight
• Auto power off or manual power off
• Data hold, record max. and min. reading
• Power by UM3/AA (1.5 V) x 6 batteries
• USB/RS232 Computer interface
Specifications
Circuit: Custom microprocessor LSI circuit
Display: 52mm x 38mm LCD with backlight
Auto Sampling Time: 1, 2, 5, 10, 30, 60, 120, 300, 600, 1800,
3600 seconds
Memory Card: SD memory card, 1 GB to 16 GB
Sampling Time: Approx. 1 second
Data Output: USB/RS232 PC computer interface
Temperature Range: 0-50°C (0-122°F)
Resolution: 0.1°C/0.1°F
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
4
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Accuracy: ± 0.8°C/1.5°F
Operating Temperature: 0-50°C (0-122°F)
Operating Humidity: Less than 85% R.H.
Power Supply: UM3/AA (1.5 V) x 6 batteries
Weight: 515g/1.13lb
Dimensions: Main instrument: 135 x 60 x 33mm
Probe: 105 x 46 x 29mm
Includes: Multi-function Probe, hard carrying case,
& batteries
Optional accessories: 4G SD Card (SD-4GB)
Type K thermocouple probe (TP-01)
Sound Adapter (SL-417)
USB cable (USB-01)
Power adapter (AP-9VA-110V)
Data Acquisition Software (SW-U801-WIN)
Tripod (BS-6)
Visit us at www.reedinstruments.com for more information on our Optional
Accessories, or e-mail us at [e-mail]
Air velocity
Measurement Range Resolution Accuracy
m/S 0.4-30.0m/S 0.1m/S ±(2%+0.2 m/S)
Km/h 1.4-126.0Km/h 0.1Km/h ±(2%+0.8 Km/h)
Mph 0.9-78.3mph 0.1mph ±(2%+0.4 mph)
Knots 0.8-68.0 knots 0.1 Knots ±(2%+0.4 Knots)
FPM 79-6890 FPM 1 FPM ±(2%+40 FPM)
Air Temperature
Measuring Range: 0 to 50°C (32 to 122°F)
Resolution: 0.1
Accuracy: ±0.8°C (±1.5°F)
continued...
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
5
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Humidity
Measuring Range: 0% to 95%RH
Resolution: 0.1%RH
Accuracy: 70%RH: ±(3% reading + 1% RH);
< 70% RH: ± 3% RH
Light meter
Measuring Range: 0-20,000 LUX, 0-1,860 Ft-cd
Resolution: 1 LUX, 0.1 Ft-cd
Accuracy: ±(5% rdg ± 8 dgt)
Type K/J thermometer
Sensor Type Resolution Range Accuracy
Type K
0.1°C -50.0 to 1300.0°C ± (0.4% + 0.5°C)
-50.1 to -100.0°C ± (0.4% + 1°C)
0.1°F -58.0 to 2372.0°F ± (0.4% + 1°F)
-58.1 to -148.0°F ± (0.4% + 1.8°F)
Type J
0.1°C -50.0 to 1200.0°C ± (0.4% + 0.5°C)
-50.1 to -100.0°C ± (0.4% + 1°C)
0.1°F -58.0 to 2192.0°F ± (0.4% + 1°F)
-58.1 to -148.0°F ± (0.4 % + 1.8°F)
Above specication tests under the environment RF Field Strength
less than 3 V/M & frequency less than 30 MHz only
For service on this or any other REED product or information on other
REED products, contact REED Instruments at [email protected]
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
6
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Instrument Description
1. Display
2. Power, ESC, & Backlight Button
3. Hold, Function, & Next Button
4. REC, Enter, & Unit Button
5. SET, Down, & Time Check Button
6. Logger, Up, & Sampling Time
Check Button
7. Probe input socket
8. Type K/J thermometer socket
9. SD card slot
10. USB/RS232 Output
11. Reset Button
12. AC/DC 9V Power Adapter
Input Socket
13. Battery Compartment/Cover
14. Battery Cover Screws
15. Stand
16. Tripod Fix Nut
17. Probe Head
18. Anemometer vane
19. Humidity/Temperature Sensor
20. Light Sensor
21. Probe Plug
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
7
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Operating Instructions
Function selection
1) Turn on the meter by pressing the Power Button. To turn the meter,
hold the Power Button for over 2 seconds.
2) The meter has 4 measuring functions to choose from: Air veloc-
ity/Temp, Humidity/Temp, Type K/J Thermometer, or Light Meter
measurements. When the meter is on, press and hold the Function
Button. The display will ash “An”, for Air velocity/Temperature
measurement, “rH” for Humidity/Temperature measurement, “tP”
for Type K/J Thermometer measurement, and “LIgHt” for Light
measurements. Release the Function Button to choose the dis-
played function.
Air velocity/Temperature measurement
1) Select the “An” function (see Function Select).
2) When the meter is off, plug the Probe Plug into the Probe Input
Socket, then power on the meter by pressing the Power Button.
3) Hold the Probe Handle and face the Anemometer Head against
the measuring airow source. The top part of the Display will show
the air velocity, and the lower part of the Display will show the air
temperature value.
Changing the Air velocity unit
To change the Air velocity unit, press and hold the Unit Button, while in
the Air Measuring Function. The display will ash the units m/S, Km/h,
mph, Knot, & FPM. Release the Unit Button to select the displayed unit.
The selected unit will be saved as the default.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
8
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Humidity/Temperature measurement
1) Select the “rH” function (see Function Select)
2) When the meter is off, plug the Probe Plug into the Probe Input
Socket, then power on the meter by pressing the Power Button.
3) The top part of the Display will show the %RH value, and the lower
part of the Display will show the temperature value.
Type K/J Thermometer measurement
1) Select the “tP” function (see Function Select).
2) Plug the optional Type K or J Thermocouple Probe into the Type
K/J Probe Input Socket. Be sure the Air Velocity Probe is not
plugged in.
3) The screen will display a “K”, meaning it is congured for a Type
K thermometer probe. The measured temperature will now be dis-
played on the display screen. To change the meter to accept a Type
J Probe, please see the Advanced Settings section.
Light Meter measurement
1) Select the “LIgHt” function (see Function Select).
2) When the meter is off, plug the Probe Plug into the Probe Input
Socket, then power on the meter by pressing the Power Button.
3) Hold the Probe Handle and face the Light Sensor against the mea-
suring light source. The top part of the Display will show the light
measurement value.
Changing the Light Meter unit
To change the Light Meter unit, press and hold the Unit Button, while in
the Light Meter Function. The display will ash the units LUX and Ft-cd.
Release the Unit Button to select the displayed unit. The selected unit will
be saved as the default.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
9
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Zero Adjustment
While taking a Light Measurement, completely cover the light sensor. If
the Display does not show value of zero, press and hold the Logger But-
ton until the Display shows a zero value.
Sound Level measurement (optional probe required)
1) Power off the meter.
2) Plug the optional Sound Adapter Plug into the Probe Input Socket
and power on the Sound Adapter (for detailed operation proce-
dures, please refer to its operation manual).
3) Power on the meter by pressing the Power Button. The meter’s
Display will show the symbol “Sound”, then return to the normal
measuring screen with the Display Unit dB. Now the meter is ready
to take sound level measurements. The display will show the mea-
suring sound value with unit “dB”.
Data Hold
While taking a measurement, press the Hold Button once and the mea-
sured value will hold on the screen, and a HOLD symbol will appear.
Press the Hold Button once again will release the data hold function.
Data Record (Max., Min. reading)
The data record function records the maximum and minimum readings.
Press the REC Button once to start the Data Record function and a “REC”
symbol will appear on the display. With the “REC” symbol on the display:
1) Press the REC Button once, and a ”REC. MAX.” symbol along with
the maximum value will appear on the display. To delete the maxi-
mum value, press the Hold Button once and the display will show
a “REC.” symbol only and execute the memory function continu-
ously.
2) Press the REC Button again, and a “REC. MIN.” symbol along
with the minimum value will appear on the display.
continued...
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
10
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
To delete the minimum value, press the Hold Button once, and the
display will show a “REC.” symbol only and execute the memory
function continuously.
3) To exit the memory record function, press the REC button for 2
seconds. The display will revert to the current reading.
Backlight ON/OFF
After powering the meter ON, the LCD Backlight will turn on automati-
cally. While taking measurements, press the Backlight Button and the LCD
Backlight will turn off. Press the Backlight Button once again to turn the
LCD Backlight back ON.
Datalogger
Preparation Before Executing the Datalogger Function:
1) Insert the optional SD card into the SD card socket.
2) Before you use an SD card with this meter for the rst time, it is
recommend to format the SD card. See Advanced Settings section
of this manual for instructions.
3) If this is the rst time the meter is used you need to adjust the
clock. See Advanced Settings section of this manual for instruc-
tions.
4) Now you need to set the decimal format. The numerical data struc-
ture downloaded to the SD card is defaulted used the “.” as the
decimal, for example “20.6” “1000.53”. But in certain countries the
“,” is used as the decimal point, for example “20,6” “1000,53”. See
Advanced Settings section of this manual for instructions on how
to change the Decimal Character.
Auto Datalogger (Set sampling time ≥1 second)
1) Start Datalogging; press the REC Button, and the “REC” symbol
will appear on the LCD screen, then press the Logger Button, the
“REC” symbol will ash while the measuring data and time informa-
tion is being saved in memory.
continued...
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]