REH4MAT FlexPoint User manual

USER MANUAL

CONTENTS
ABOUT THE FLEXPOINT® SYSTEM
SAFETY RULES
MAINTENANCE
WARRANTY
STALLATION INSTRUCTIONS
AVAILABLE VESTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT........
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT..
APPROVED ACCESSORIES
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS.
ADJUSTMENT..
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT...
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT
APPROVED MOUNTING ELEMENTS........
INSTALLATION INSTRUCTIONS
ADJUSTMENT
APPROVED ACCESSORIES
APPROVED MOUNTING ELEMENTS
..........................................................................................................................5
....................................................................................................................................................6
...............................................................................................................................................8
...................................................................................................................................................10
.......................................................................................................................................................10
IN ®..........................................................................................................................11
..................................................................................................................................................18
.....................................................................................................................................................18
...................................................................................................................................19
...........................................................................................................................................................19
............................................................................................................................21
..................................................................................................................................................22
...................................................................................................................................22
...................................................................................................................................................23
............................................................................................................................25
..................................................................................................................................................26
...................................................................................................................................26
...........................................................................................................................................................27
............................................................................................................................29
..................................................................................................................................................30
..................................................................................................................................30
........................................................................................................................................................30
........................................................................................................................................31
...........................................................................................................................31
..................................................................................................................................................33
..................................................................................................................................33
.........................................................................................................................................................33
............................................................................................................................35
..................................................................................................................................................36
...................................................................................................................................36
........................................................................................................................................................37
............................................................................................................................38
..................................................................................................................................................39
..................................................................................................................................39
..........................................................................................................................................................39
...................................................................................................................42
..................................................................................................................................................43
..................................................................................................................................43
..........................................................................................................................................................43
........................................................................................................................................46
............................................................................................................................46
HOW TO USE VEST
MODEL: FP-01
MODEL: FP-02
MODEL: FP-03
MODEL: FP-04
MODEL: FP-05
MODEL: FP-06
MODEL: FP-10
MODEL: FP-11

MODEL: FP-12
MODEL: FP-13
MODEL: FP-14
MODEL: FP-15
MODEL: FP-20
MODEL: FP-21
MODEL: FP-22
MODEL: FP-30
MODEL: FP-40
MODEL: FP-41
MODEL: FP-42
MODEL: FP-43
MODEL: FP-44
..................................................................................................................................................47
...................................................................................................................................47
......................................................................................................................................................47
.........................................................................................................................................50
............................................................................................................................50
..................................................................................................................................................51
...................................................................................................................................51
.........................................................................................................................................................51
.......................................................................................................................................53
............................................................................................................................53
..................................................................................................................................................54
..................................................................................................................................54
..........................................................................................................................................................54
......................................................................................................................................56
...........................................................................................................................56
..................................................................................................................................................57
..................................................................................................................................57
......................................................................................................................................................57
.......................................................................................................................................58
...........................................................................................................................58
..................................................................................................................................................60
..................................................................................................................................60
..........................................................................................................................................................60
...........................................................................................................................61
..................................................................................................................................................63
........................................................................................................................................63
..................................................................................................................................63
..................................................................................................................................................64
..................................................................................................................................64
..................................................................................................................................................65
.........................................................................................................................................................65
......................................................................................................................................65
..................................................................................................................................................66
..................................................................................................................................................69
..................................................................................................................................................70
..................................................................................................................................................71
..................................................................................................................................................72
FP-A-1.............................................................................................................................................................73
FP-A-2.............................................................................................................................................................74
FP-A-3.............................................................................................................................................................75
FP-A-4.............................................................................................................................................................76
INSTALLATION INSTRUCTIONS
ADJUSTMENT.....
APPROVED ACCESSORIES
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT..
APPROVED ACCESSORIES..
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT
APPROVED ACCESSORIES..
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT....
APPROVED ACCESSORIES.
APPROVED MOUNTING ELEMENTS
INSTALLATION INSTRUCTIONS
ADJUSTMENT
APPROVED MOUNTING ELEMENTS
AVAILABLE BELTS............
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
ADJUSTMENT.
APPROVED ACCESSORIES..

The FlexPoint® System consists of numerous elements which provide the correct and safe stabilization of the
upper body, pelvis, upper and lower limbs while sitting. Due to the universal attachment methods, it is ideal for
the vast majority of strollers and car seats offered on the market of medical devices. The selected products of the
are equipped with additional elements allowing easier fastening of belts to people with
hand dysfunctions.
Depending on individual needs, the user can choose a classic solution or an advanced dynamic product.
is a system recommended especially for people with spasticity. The dynamic function of the
system is based on the proper resilience of the stabilizing elements, which provide the user with
safety and comfort of use. This solution significantly reduces the risk of bodily injury which might be caused by,
for example, the excessive pressure from inflexible belts.
Depending on the product model, the system uses: solid and durable polyamide buckles reinforced
with glass fiber, which have a higher level of strength; polyamide swivel buckles; metal safety buckles with the
'PRESS' quick release system; mounting triangles with regulators; rack and pinion clamping system; holder
clamps with an adjustable diameter for fixing the system on frames; supports and pressure relieving cushions.
The system maintains the correct posture, which prevents deformations and improves breathing. It
is the perfect solution to be used at home, work or during rehabilitation.
FlexPoint® System
FlexPoint®
FlexPoint®
FlexPoint®
FlexPoint®
ABOUT THE FLEXPOINT® SYSTEM
5
These instructions for use provide essential information for the safe use and maintenance of
all the FlexPoint® products. Read the instructions carefully and keep them in a visible place.

ATTENTION! These instructions for use contain important information for the safe use and maintenance of all the
products. Read them carefully before using the product. Give them to the user or their caregiver. Make sure
that the instructions are understood. Keep them in order to be able to use them again if necessary.
ATTENTION! Always follow the instructions for use. Using the products against the instructions may be
dangerous for the user.
ATTENTION! Before using the product, check if it has no signs of wear – no damage or tearing of straps, stitching, buckles or
other elements of the system. In case of significant wear or damage, contact the manufacturer to have the product repaired
or replaced. Only an undamaged product and proper use guarantee its right and safe working.
ATTENTION! Under no circumstances should an unqualified person repair or alter the product – health and safety of the user
depend on it. In case of significant wear or damage, contact your supplier or the manufacturer to have the product repaired
or replaced.
ATTENTION! For the products installation, use only the mounting elements approved by the manufacturer.
Failure to do so may pose a serious risk to the user. The product should be installed and adjusted by a person trained in its
use.
ATTENTION! The products should only be used for positioning a person in wheelchairs or other seats (in case of
the BeltiCar® System also in a car seat). The products are not intended to be used as transportation safety
belts or in any other use where their failure could result in injury. Misuse of the products is not authorized and
not safe.
ATTENTION! The products contain small elements that could be swallowed. Keep them away from children
and animals.
ATTENTION! Some of the products are available with a 'PRESS' quick release system. Accidental release of
these products may cause the user to slide forwards when sitting. If there is a possibility that the user's movements or
cognitive abilities can lead to accidental release, a caregiver must be absolutely present at all times during their use.
ATTENTION! As with any new sitting support, the products may change the way the user sits.
ATTENTION! The manufacturer is responsible for the proper functioning of the products only if the products are
purchased from the manufacturer, an authorized distributor or in a specialized medical store.
ATTENTION! All the products are equipped with the quick release system. Make sure that all caregivers know
how to unfasten the products. Failure to do so may delay the user's release in case of emergency.
ATTENTION! The products should not be used without clothing. Their elements should not come into direct
contact with the skin.
FlexPoint®
FlexPoint®
FlexPoint®
FlexPoint® FlexPoint® FlexPoint®
FlexPoint®
FlexPoint®
FlexPoint®
FlexPoint®
FlexPoint®
FlexPoint®
SAFETY RULES
6

BEFORE USING THE FLEXPOINT® PRODUCTS, ALWAYS CHECK:
ţIf there are no signs of wear, damage or tearing of straps, stitching, buckles or other elements. Only an
undamaged product and proper use guarantee its right and safe working.
ţIf the product has been properly installed. If all the fastening elements have been properly and tightened
firmly. If they do not uninstall or unfasten under pressure or when pulled. If all the buckles, adjustment straps
and other fastening elements work correctly and do not unfasten under pressure or when pulled. In order to
check that, pull the installed element firmly in different directions.
ţIf the product has been correctly fitted to the user. If it does not irritate skin or press too hard on any part of the
user's body. If the user feels comfortable in the product. If the user can breathe freely. To check the fit of the
FlexPoint® product, the user should lean forward and from side to side
ţIf the product does not press the user's neck, causing the risk of strangulation. To check that, have the user
lean forward (especially when using vests and chest belts). For more information about safe use of the vests and
chest belts, see pages 8-9 of the instructions for use.
ţIf the user has the pelvis stabilized, when using the vest. For more information about safe use of the vests and
chest belts, see pages 8-9 of the instructions for use.
ţIf the straps are not twisted or too loose. The straps must be tight, they cannot twist or roll.
ţIf the place of the FlexPoint® elements installation is appropriate and guarantees safe use of the product. If the
installed product does not collide with the elements of the stroller / seat it has been fixed on, for example with
the backrest tilting mechanism. If the product does not collide with other devices used by the user.
7
ATTENTION! It is absolutely necessary to periodically check the skin integrity, not only in places where the
products contact the user, but also in the sensitive body areas where there is a risk of developing bedsores. The contact with
the sensitive body areas, which are particularly exposed to pressure, for example sacrum or buttocks, should be as limited
as possible. In case of increased redness or irritation of the skin, discontinue use of the product and contact your physician or
physiotherapist. Failure to do so may result in serious injury, such as bedsores. For users spending a lot of time in a sitting
position, it is recommended to use anti-bedsores cushion, the BodyMap® cushions or the thermo-active foam VisMemo™
cushions, manufactured by REH4MAT.
ATTENTION! DUE TO THE RISK OF STRANGULATION, USING THE FLEXPOINT® PRODUCTS, ESPECIALLY VESTS AND CHEST BELTS
WITHOUT THE PELVIS STABILIZATION, IS DANGEROUS. ALWAYS USE A PROPERLY FITTED PELVIC BELT (FOR MORE INFORMATION
ABOUT SAFE INSTALLATION AND USE OF THE FLEXPOINT® VESTS, SEE PAGES 8-9 OF THE INSTRUCTIONS FOR USE.
ATTENTION! USING THE BELTICAR® SYSTEM IN VEHICLES DOES NOT RELEASE THE USER FROM THE OBLIGATION OF USING THE
REGULAR SEAT BELTS.
FlexPoint®

HOW TO USE VEST
8
The vest provides posture support for wheelchair users as well as patients sitting in positioning chairs or other rehabilitation
seats. When properly used, the vest allows the patient to adopt the correct sitting position for a longer period of time. The
design and shape of the vest make it possible for the patient to be free to move their upper limbs within the constraints of the
patient. If the vest is not used properly, it can pose a serious threat to the health and life of the patient!
Possible threats incident to the use of the vest:
If the lower vest straps are fastened too loosely, there is a risk that the vest will move upwards to the patient's neck,
making it difficult to breathe – always check the tension of the straps and set them in such a way that the lower edge of
the vest is located near the lower abdomen of the patient.
In a situation when the patient slips off the seat, the upper edge of the vest cover's the patient's neck and blocks the
trachea, making it difficult to breathe – it is therefore necessary to ALWAYS use the accessories stabilizing the patient's
pelvis, such as a pelvic belt, thigh abduction belts or an abduction block.
There is a risk that the upper straps of the vest will press the patient's neck, blocking the trachea and making it difficult
to breathe. This might happen if the patient's body is improperly secured in the seat or stroller – it is then necessary to
use the optional accessories of these devices and stabilize the patient's body using the lateral supports. If there is no
possibility to use such accessories with the device and the patient's body cannot be properly stabilized, the device
should be replaced with the one having such an option.
1)
2)
3)
4) The vest is fastened too tightly to the backrest and as a result the patient cannot breathe easily – in this case
the vest should be loosened in such a way that it is possible for the caregiver to insert a straightened hand
between the vest and the patient's body. If, however, we want to stabilize the patient's body properly, we
should use a dynamic orthopedic vest, e.g. a Flex-point vest, which does not cause the breathing difficulty for
the patient.
Instructions for the proper use of the vest:
1) Make sure that the patient is sitting in the best possible position:
· in the middle of the seat,
· deeply in the seat in such a way that the patient's lumbar spine rests against the backrest.
2) Secure the patient's pelvis with, for example, a pelvic belt, thigh abduction belts or an abduction block.
3) Make sure that the side supports of the device, if used, are set in the correct position. It is required that the patients with
the poor trunk control use the side supports. The side supports limit the lateral movements of the patient's body,
which could lead to the compression of the vest straps on the neck of the patient.
4) Secure the vest:
· fasten and adjust the lower straps of the vest, so that the lower edge of the vest is located near the lower
abdomen of the patient,
· fasten the horizontal strap of the vest (if present),
· fasten the shoulder straps of the vest,
· check if the buckles of the vest do not open under pressure.
5) Check the patient's position:
· make sure that the vest cannot move by itself towards the patient's neck,
· make sure that you can insert a straightened hand between the vest and the patient's body.

To prevent injuries and to minimize the risks associated with the use of the vest, the following rules should be
followed:
1) The position of the vest MUST be checked each time after putting the patient in the seat.
2) Special attention should be paid to protecting the patient from falling forward, slipping off the seat or lifting the pelvis.
The vest MUST be used with the accessories which will secure the patient's pelvis at all times (e.g. the pelvic belt, thigh
abduction belts or the abduction block). The use of the vest cannot be considered separately but as a part of a general
posture support system including supports such as pelvic belts, foot support, torso stabilization, thigh abduction belts,
tilt-in-space position and reclining backrest.
3) Special attention should be paid to ensuring that the entire foot of the patient has stable support. If the device is not
equipped with a foot support, the patient's feet must rest firmly against the ground.
4) It should be remembered that any change of the inclination angle of the backrest, seat, foot support or tilt-in-space
function might affect the effectiveness of the belts and supports!
5) Special attention should be paid to the use of stabilization elements or side supports. If the patient has poor trunk control,
the side supports will limit the lateral movements, which could lead to the compression of the vest straps on the neck of
the patient.
6) The mounting of the vest and adjusting it to the patient can only be carried out by a suitably trained person, who is familiar
with the instructions for the use of the vest and the rules of its safe use.
7) Do not make any repairs or modifications to the vest on your own. In order to repair or replace any part of the vest, please
contact the manufacturer.
8) Do not use a damaged or incomplete vest, as this poses a serious threat to the health and life of the patient!
9) Do not leave the patient in the device unattended!
10) The correctness of the use of the vest should be particularly controlled in accordance with the recommendations in case
of children, patients with impaired memory or mentally ill.
11) Make sure that all people taking care of the patient are familiar with the rules of the safe use of the vest.
How to care for the vest:
The vest works effectively only if kept clean and maintained in accordance with the manufacturer's instructions. Before
each use of the vest, check whether:
1) the vest straps are not frayed or worn. If so, have them exchanged for new ones,
2) the vest straps are not attached to the wheels of the device,
3) the buckles are not damaged. If so, have them exchanged for new ones,
4) the Velcro fastening holds firmly. If not, remove any dirt or hair from the Velcro, or have it replaced with a new one,
5) there have been no changes in the patient's height or weight from the moment the vest was adjusted to the patient,
6) the shoulder straps of the vest are adjusted so that they are not too loose or too tight,
7) the vest should be cleaned regularly with the use of warm soapy water and dried out of the direct sunlight and other
sources of heat. The vest must always be dry before usage.
If you have any doubts or questions about the use of the vest, please contact your doctor or physiotherapist.
9

Cleaning:
• hand wash at or below 40°C
• dry flat
do not iron
do not bleach
do not machine wash, do not tumble dry
•
•
•
MAINTENANCE
In order to keep the high quality and features of the products, it is necessary to regularly check the condition of
all the elements, such as: straps, stitching, buckles and other elements. The products should not be used if any
of their elements is worn or damaged. In case of significant wear or damage, contact the manufacturer to have the product
repaired or replaced. Under no circumstances should an unqualified person repair or alter the product, as the health and
safety of the user depend on it.
ATTENTION! Keep the FlexPoint® products away from heat sources. Do not expose them to prolonged sunlight.
ATTENTION! After washing, make sure the product is completely dry before use.
ATTENTION! Check periodically for signs of wear in the stitching, webbing and pads. In case of significant wear or damage,
contact your supplier or the manufacturer to have the product repaired or replaced. Under no circumstances should an
unqualified person repair or alter the product, as the health and safety of the user depend on it.
FlexPoint®
FlexPoint®
WARRANTY
The FlexPoint® products are covered by a 24-month warranty for material defects as well as the defects caused in normal
conditions of use. Contact your supplier or the manufacturer in order to make a warranty claim.
Warranty does not cover:
·damage caused by high temperature, caustic agents or fire;
·permanent discoloration caused by contact with clothing containing active, migrating dyes (e.g. leather,
jeans, suede, corduroy, etc.);
·stains caused by a pen, ink, marker, etc., containing active dyes;
·mechanical damage caused by pets or other users;
·defects caused by improper maintenance, improper installation or improper use of the products.
10

* Some FlexPoint® products are equipped with a mounting triangle and a regulator as standard (FP-EM-2). See the picture below showing how to put
them on the strap.
INSTALLATION INSTRUCTIONS
11
Mounting elements:
ref. FP-EM-4 ref. FP-EM-5
ref. FP-EM-1
ref. FP-EM-6
ref. FP-EM-3
ref. FP-EM-2*
The above MOUNTING ELEMENTS allow the configuration of various MOUNTING SETS presented and described
below:
MOUNTING SET 1: With the mounting triangle FP-EM-2 and screw FP-EM-4, the product can be
attached directly to a flat, large and stable surface of a wheelchair or a chair, such as a backrest or seat.
The product can be also mounted to an already existing fixing hole with the use of the above mentioned
mounting elements, provided that it is not a through hole.
The fixing hole must be threaded.
FlexPoint®
ref. FP-EM-2 ref. FP-EM-4
MOUNTING SET
1

12
ref. FP-EM-5
ref. FP-EM-2
MOUNTING SET 2: The FlexPoint® product can also be attached to an already existing fixing hole with the use of
a mounting triangle FP-EM-2 and screw FP-EM-5, provided that it is a through hole. Then, the screw must be
secured with a cap, which is included in the mounting set.
The fixing hole does not have to be threaded.
MOUNTING SET 3: With the mounting triangle FP-EM-2 and wood screw FP-EM-6, the FlexPoint® product
can be attached directly to a flat, large and stable wooden surface, such as a backrest or a seat of a chair.
The wooden surface must be at least 18 mm thick.
In order to tighten the screws FP-EM-5, use the hex key. In order to tighten the screws FP-EM-4 , use the
hex key and the Spanner key.
ref. FP-EM-6
ref. FP-EM-2
2
3
MOUNTING SETMOUNTING SET

13
Use a Phillips screwdriver to tighten the wood screw FP-EM-6.
MOUNTING SET 7: This is a non-invasive way to mount the FlexPoint® product on the wheelchair or seat
frame. In order to do that, use the mounting triangle FP-EM-2 and holder clamp FP-EM-1.
Together with the holder clamp FP-EM-1, the following elements are included:
3. button-head screw with a hex socket
1. holder clamp Ø25 mm
2. two reducing holder
clamps Ø22 mm and Ø19 mm
ref. FP-EM-1
ref. FP-EM-2
1. holder clamp Ø25 mm,
2. two reducing holder clamps Ø22 mm and Ø19 mm (with M5 thread, 30 mm long, with M6 cap nut) – if the
frame has a diameter other than Ø25 mm, you can use the reducing holder clamp Ø22 mm or Ø19 mm.
3. button-head screw with a hex socket – the screw is used to connect the mounting triangle FP-EM-2 with the
holder clamp FP-EM-1.
3
MOUNTING SET

14
MOUNTING SET 4, 4a, 5, 5a, 6, 6a, 8, 8a: in this case, mount the FlexPoint® product as described in the
MOUNTING SETS 1, 2, 3 and 7, except that you use the retractable belt with cinch buckle FP-EM-3, which
includes:
1. cinch buckle,
2. retractable belt available in five lengths (18 mm, 20 mm, 25 mm, 30 mm or 35 mm),
3. button-head screw with a hex socket (with M6 thread, 12 mm long, with M6 cap nut) (used to connect the mounting triangle
FP-EM-2 to the retractable belt FP-EM-3 (2)) – the mounting method is similar to the one described in the MOUNTING SETS 4, 5,
6 and 8 – see page 14.
4. cross-recessed countersunk screw (with M6 thread, 12 mm long, with M6 cap nut) (used to connect the mounting triangle FP-
EM-2 with the cinch buckle (1)) – the mounting method is similar to the one described in the MOUNTING SETS 4a, 5a, 6a and 8a
– see page 15.
3. button-head screw with a
hex socket (with M6 thread, 12
mm long, with M6 cap nut)
4. cross-recessed countersunk
screw (with M6 thread, 12 mm
long, with M6 cap nut)
2.retractable belt available in five lengths
(18 mm, 20 mm, 25 mm, 30 mm or 35 mm)
1.cinch buckle
In this case there are two possible configurations to choose from: MOUNTING SET 4, 5, 6 and 8 and MOUNTING
SET 4a, 5a, 6a and 8a. Depending on whether you want to mount the retractable belt (2) (MOUNTING SET 4, 5, 6
and 8) or the cinch buckle (1) (MOUNTING SET 4a, 5a, 6a and 8a) directly to the mounting triangle FP-EM-2, you
should use different screws that are included in the FP-EM-3 set (check the detailed mounting instructions
below).
MOUNTING SET 4, 5, 6, 8: to connect the mounting triangle FP-EM-
2 with the retractable belt (2), use the button-head screw with a
hex socket (3).
Next, attach the cinch buckle (1) to the desired element of the
wheelchair with the use of the elements FP-EM-1, FP-EM-4, FP-
EM-5 or FP-EM-6 (follow the instructions described on pages 11 –
13, in MOUNTING SET 1, 2, 3 and 7).
(3)

Now, thread the retractable belt (2) through the cinch buckle (1).
ref. FP-EM-2 ref. FP-EM-3 ref. FP-EM-4
ref. FP-EM-2 ref. FP-EM-3 ref. FP-EM-5
ref. FP-EM-2 ref. FP-EM-3 ref. FP-EM-6
ref. FP-EM-2 ref. FP-EM-3 ref. FP-EM-1
15
4
5
6
8
MOUNTING SET
MOUNTING SET
MOUNTING SET
MOUNTING SET

MOUNTING SET 4a, 5a, 6a and 8a: to connect the mounting
triangle FP-EM-2 with the cinch buckle (1), use the cross-
recessed countersunk screw (4).
Now, thread the retractable belt (2) through the cinch buckle (1).
Next, attach the retractable belt (2) to the desired element of the
wheelchair with the use of the elements FP-EM-1, FP-EM-4, FP-
EM-5 or FP-EM-6 (follow the instructions described on pages 11 –
13, in MOUNTING SET 1, 2, 3 and 7).
ref. FP-EM-2 ref. FP-EM-3 ref. FP-EM-4
ref. FP-EM-2 ref. FP-EM-5
ref. FP-EM-3
16
(4)
4a
5a
MOUNTING SET
MOUNTING SET

ref. FP-EM-2 ref. FP-EM-6
ref. FP-EM-3
ref. FP-EM-2 ref. FP-EM-3 ref. FP-EM-1
ATTENTION! TO MOUNT THE FLEXPOINT® PRODUCTS, IT IS RECOMMENDED TO USE A WHEELCHAIR / SEAT FRAME OR
ALREADY EXISTING THREADED FIXING HOLES (IN THE CASE OF THE MOUNTING SCREW WITH CAP NUT FP-EM-5, THE
FIXING HOLE DOES NOT HAVE TO BE THREADED). DO NOT DRILL THE FIXING HOLES IN THE WHEELCHAIR / SEAT YOURSELF,
AS THIS MAY AFFECT ITS CONSTRUCTION AND LOWER ITS DURABILITY. PLEASE NOTE THAT THE SELF-DRILLING HOLES IN
A WHEELCHAIR / SEAT MAY RESULT IN LOSS OF WARRANTY FOR THIS PRODUCT.
ATTENTION! THE FLEXPOINT® PRODUCTS MANUFACTURER IS NOT LIABLE FOR DAMAGE TO THE WHEELCHAIR / SEAT,
WHICH IS A CONSEQUENCE OF SELF-DRILLING TO INSTALL THE FLEXPOINT® PRODUCTS.
ATTENTION! FOR THE FLEXPOINT® PRODUCTS INSTALLATION, USE ONLY THE MOUNTING ELEMENTS APPROVED BY THE
MANUFACTURER. FAILURE TO DO SO MAY POSE A SERIOUS RISK TO THE USER WHEN USING THE FLEXPOINT® PRODUCTS.
When selecting the mounting method, consider choosing the most accessible and convenient place of the FlexPoint®
elements installation, bearing in mind the safety of use as well. After mounting the FlexPoint® product on the
wheelchair, check if it does not collide with its elements, mechanisms or other devices used by the user.
17
6a
8a
MOUNTING SETMOUNTING SET

MODEL: FP-01
DYNAMIC 4-POINT CHEST VEST
DYNAMIC 4-POINT CHEST FlexPoint® VEST allows the trunk to be properly positioned while sitting. It
perfectly stabilizes the shoulders without limiting the movements of the arms. Sitting in the correct position
allows better control of the head and trunk. It also facilitates swallowing and breathing.
The vest has been designed in such a way as to provide the user with the right balance between freedom of
movement and full stabilization. The resilient material of the vest guarantees much better pressure
distribution (vertical dynamics) and a certain range of free movement of the chest (horizontal dynamics).
Such a solution is recommended especially for spastic people. The contact surface of the vest with the body
is greater than in the case of other standard solutions, which guarantees better stabilization.
AVAILABLE VESTS
SLIM VEST WITH ZIPPER
STANDARD VEST WITHOUT ZIPPER STANDARD VEST WITH ZIPPER
18
MODEL: FP-01
SLIM VEST WITHOUT ZIPPER

INSTALLATION INSTRUCTIONS
To mount the product:
1. Select the most convenient MOUNTING ELEMENT for the wheelchair or seat you have (follow the instructions
described in the INSTALLATION INSTRUCTIONS chapter on pages 11-17). ATTENTION! To mount a vest it is
necessary that the backrest of the wheelchair / seat is at the height of the user's shoulders.
2. Locate the place where the vest can be safely attached. Mount the vest using the appropriate MOUNTING ELEMENTS.
After mounting the FlexPoint® product on the wheelchair, check if it does not collide with its elements, mechanisms
or other devices used by the user.
3. Unfasten the vest and sit the user down on the wheelchair / seat. Then, fasten and adjust the vest, positioning the
user in the vest (instructions on how to properly adjust the vest to the user are below). When using a vest with zipper,
make sure that the upper part of the zipper does not go above the user's sternum (for more information about safe
use of the vest, see pages 8-9 of the instructions for use).
4. Firmly fix the pelvis stabilizing belt.
ADJUSTMENT
Adjust the shoulder straps of the vest, according to the user's shoulder width and sitting position. The upper straps of
the vest should be between the neck and shoulder joint. Adjust the length of the lower straps so that they are not loose.
Then, adjust the upper straps and position the vest so that it properly supports and stabilizes the user.
The vest should be properly adjusted, tightened and firmly attached to the desired element of the wheelchair so that the
user's chest is stabilized and safe. A slight adjustment of the vest can be made using the Hold & Pull™ system (see
below). A wider range of adjustment is possible with the use of the mounting triangle FP-EM-2.
ATTENTION! Make sure that the user feels comfortable and the vest does not press the user's neck or other parts of
the body. For more information about safe use of the vest, see pages 8-9 of the instructions for use.
MODEL: FP-01
19
Hold & Pull™ system – the system provides a quick adjustment of the vest. An ergonomic, D-shaped grip
is a great facilitation for people with hand dysfunctions. It is easy to hold and makes the adjustment of the
vest smooth. Depending on the extent, to which the user is alert and mobile, you can choose a vest with a
front adjustment (user side) or a rear adjustment (caregiver side).

ATTENTION! THE VEST WITH A ZIPPER OR FRONT ADJUSTMENT SHOULD ONLY BE USED BY ALERT USERS. IF THERE IS
A POSSIBILITY THAT THE USER'S MOVEMENTS OR COGNITIVE ABILITIES CAN LEAD TO ACCIDENTAL RELEASE, A
CAREGIVER MUST BE ABSOLUTELY PRESENT AT ALL TIMES DURING ITS USE.
ATTENTION! THE DYNAMIC CONSTRUCTION OF THE VEST IS BASED ON SOFT, ELASTIC AND STRETCHABLE RELIEVING
ELEMENTS, WHICH SIGNIFICANTLY REDUCE PRESSURE ON THE CHEST. THE VEST FOLLOWS THE TRUNK MOVEMENT
FORWARD, WHICH IS ESPECIALLY BENEFICIAL FOR USERS WITH INCREASED MUSCLE TONE. IN ADDITION, A DEEP CUT IN
THE VEST ELIMINATES THE RISK OF THE VEST SHIFTING TOWARDS THE NECKLINE. DESPITE THAT, THE VEST SHOULD
ALWAYS BE USED WITH A PELVIS STABILIZING BELT. USING THE VEST WITHOUT STABILIZING THE PELVIS MAY CAUSE THE
USER TO SLIDE OUT OF THE SEAT, WHICH MAY RESULT IN CHOKING OR STRANGULATION (FOR MORE INFORMATION ABOUT
SAFE USE OF THE VEST, SEE PAGES 8-9 OF THE INSTRUCTIONS FOR USE).
ATTENTION! THE PRODUCT SHOULD BE INSTALLED AND ADJUSTED UNDER SUPERVISION OF A QUALIFIED AND TRAINED
PERSON IN ITS USE.
ATTENTION! DO NOT LEAVE THE USER UNATTENDED WHILE USING THE VEST.
FRONT ADJUSTMENT – USER SIDE
(ADJUSTED BY USER)
REAR ADJUSTMENT – CAREGIVER SIDE
(ADJUSTED BY CAREGIVER)
MODEL: FP-01
20