Reliable RFC30 LL User manual

The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Bulletin 032 Rev. B
Bulletin 032 Rev. B
Model RFC30 LL (SIN RA3211)
Model RFC43 LL (SIN RA3212)
Model RFC49 LL (SIN RA3216)
Residential Flat Concealed
Sprinklers
Specifically Listed for use in
Multipurpose Systems that
serve both domestic water
and fire protection.
Sprinkler Type
Residential Flat Concealed Sprinkler listed for
a minimum design density of .05 gpm/ft2with
“potable water”.
• Model RFC30 LL
• Model RFC43 LL
• Model RFC49 LL
Features
1. National Sanitation Foundation (NSF) Cer-
tified to NSF/ANSI Standard 61 Annex G
(Less than 0.25% Lead content).
2. Very low water flow requirements.
3. Cover plate attachment (Plain or Perforated)
with 1/2” (13mm) total adjustment
4. Thread-on/off or Push-on/off cover attach-
ment option.
5. Smooth Aesthetic ceiling profile.
6. Available in white, brass, chrome and black
plated or custom painted finishes.
Patent Pending
Listing & Approvals
1. Listed by Underwriters Laboratories, and certified by
UL for Canada (cULus)
2. NSF Cerified to NSF/ANSI Standard 61 Annex G
Product Description
Model RFC30 LL, RFC43 LL and RFC49 LL Concealed
Residential Sprinklers are fast response residential fusible
solder link automatic sprinklers. Residential sprinklers dif-
fer from standard sprinklers primarily in their response time
and water distribution patterns. Model RFC30 LL, RFC43
LL and RFC49 LL sprinklers discharge water in a hemi-
spherical pattern below the sprinkler deflector. Residen-
tial distribution patterns are higher and generally contain
a finer droplet size than standard sprinkler patterns. The
combination of speed of operation and high discharge pat-
tern required for residential sprinklers has demonstrated,
in fire testing, an ability for controlling residential fires, and
thereby providing significant evacuation time for occu-
pants. The RFC30 LL, RFC43 LL and RFC49 LL Sprinklers
provide the best form of fire protection by combining an at-
tractive appearance and ½” (13mm) of cover adjustment
for ease of installation. The small diameter cover plate is
easily and positively attached and blends into the ceiling,
concealing the most dependable fire protection available,
an automatic sprinkler system. The RFC30 LL, RFC43 LL
and RFC49 LL are UL Listed and NSF Certified Residen-
tial Sprinklers to be installed in the residential “potable”
water applications of any occupancy in accordance with
NFPA 13, 13R, & 13D and meets all applicable low lead
standards, .25% or less. The cover plate adjustability of
the RFC30 LL, RFC43 LL and RFC49 LL can reduce the
need for precise cutting of drop nipples. The threaded
cover plate assembly can be adjusted without tools to fit
accurately against the ceiling. The fire protection system
need not be shut down to adjust or remove the cover plate
assembly.
PEX Pipe System

2.
Application and Installation
For use in fire sprinkler systems that also supply potable water
to a plumbing fixture or fixtures.
The RFC30 LL, RFC43 LL and RFC49 LL, for residential instal-
lations, use a 165°F (74°C) fusible solder link in a tuning fork
style sprinkler frame with a drop-down deflector. This assembly
is recessed into the ceiling and concealed by a flat cover plate.
The cover plate is attached to the skirt, using 135°F (57°C) or-
dinary temperature classification solder. When the ceiling tem-
perature rises, the solder holding the cover plate releases the
cover allowing the deflector to drop into position and exposing
the sprinkler inside to ceiling temperature. The subsequent op-
eration of the solder link opens the waterway and causes the
deflector to drop into position to distribute the discharging water
in a hemispherical pattern below the sprinkler deflector. Any
adjustment of thread engagement between the cover plate and
cup will assure that the drop-down deflector is properly located
below the ceiling. The residential distribution pattern contains
a finer droplet size than a standard sprinkler, and the pattern
produces significantly higher wall wetting. After a 25/8” inch di-
ameter hole is cut in the ceiling, the sprinkler is to be installed
with the Model FC Wrench.
When installing a sprinkler, the wrench is first positioned into
the sprinkler/cup assembly and around the hexagonal body of
the sprinkler frame. The wrench must bottom out against the
cup in order to ensure proper, safe installation. The sprinkler
is then tightened into the pipe fitting. When inserting or remov-
ing the wrench from the sprinkler/cup assembly, care should be
taken to prevent damage to the sprinkler. DO NOT WRENCH
ON ANY OTHER PARTOF THE SPRINKLER / CUP ASSEMBLY.
MODEL RFC30 LL, RFC43 LL AND RFC49 LL CONCEALED
SPRINKLERS MUST BE INSTALLED ONLY WITH 135°F RATED
COVERS.
Note: A leak tight ½” NPT (R1/2) sprinkler joint can be ob-
tained with a torque of 8-18 ft-lbs (10,8 - 24,4 N-m). Do not
tighten sprinklers over maximum recommended torque. It may
cause leakage or impairment of the sprinklers.
Cover assemblies provide up to 1/2” (13mm) of adjustment.
Turn the cover clockwise until the flange is in contact with the
ceiling. For the push-on/thread-off option, the cover assembly
is pushed onto the cup and final adjustment is made by turning
the cover clockwise until the skirt flange makes full contact with
the ceiling. Cover removal requires turning in the counter-clock-
Temperature Rating
Sprinkler Cover Plate Max. Ambient Temp.
165°F/74°C 135°F/57°C 100°F/38°C
Installation Data: RFC30 LL (SIN RA3211)
Thread
Size
inch (mm)
K Factor
Sprinkler
Spacing
ft. (m)
Maximum
Distance to
Wall
ft. (m)
Minimum
Distance between
sprinklers
ft. (m)
Minimum Required
Sprinkler Discharge
Flow
gpm (Lpm)
Press.
psi (bar)
½” (15mm)
½” (15mm)
3.0
3.0
12 x 12 (3.6x3.6)
14 x 14 (4.3x4.3)
6 (1.83)
7 (2.13)
8 (2.43)
8 (2.43)
9 (34.1)
10 (37.8)
9.0 (0.62)
11 (0.76)
Note: 1 bar = 100 Kpa
Installation Data: RFC43 LL (SIN RA3212)
Thread
Size
inch (mm)
K Factor
Sprinkler
Spacing
ft. (m)
Maximum
Distance to
Wall
ft. (m)
Minimum
Distance between
sprinklers
ft. (m)
Minimum Required
Sprinkler Discharge
Flow
gpm (Lpm)
Press.
psi (bar)
½” (15mm)
½” (15mm)
½” (15mm)
½” (15mm)
½” (15mm)
4.3
4.3
4.3
4.3
4.3
12 x 12 (3.6x3.6)
14 x 14 (4.3x4.3)
16 x 16 (4.9x4.9)
18 x 18 (5.5x5.5)
20 x 20 (6.0x6.0)
6 (1.83)
7 (2.13)
8 (2.43)
9 (2.74)
10 (3.05)
8 (2.43)
8 (2.43)
8 (2.43)
8 (2.43)
8 (2.43)
12 (45)
13 (49)
13 (49)
18 (68)
21 (79)
7.8 (0.54)
9.1 (0.63)
9.1 (0.63)
17.5 (1.21)
23.8 (1.64)
Note: 1 bar = 100 Kpa
Installation Data: RFC49 LL (RA3216)
Thread
Size
inch (mm)
K Factor
Sprinkler
Spacing
ft. (m)
Maximum
Distance to
Wall
ft. (m)
Minimum
Distance between
sprinklers
ft. (m)
Minimum Required
Sprinkler Discharge
Flow
gpm (Lpm)
Press.
psi (bar)
½” (15mm)
½” (15mm)
½” (15mm)
½” (15mm)
½” (15mm)
4.9
4.9
4.9
4.9
4.9
12 x 12 (3.6x3.6)
14 x 14 (4.3x4.3)
16 x 16 (4.9x4.9)
18 x 18 (5.5x5.5)
20 x 20 (6.0x6.0)
6 (1.83)
7 (2.13)
8 (2.43)
9 (2.74)
10 (3.05)
8 (2.43)
8 (2.43)
8 (2.43)
8 (2.43)
8 (2.43)
13 (49)
13 (49)
13 (49)
17 (64.3)
20 (75.7)
7.0 (0.48)
7.0 (0.48)
7.0 (0.48)
12.0 (0.83)
16.7 (1.14)
Note: 1 bar = 100 Kpa
FOR SLOPED CEILING APPLICATIONS SEE RASCO BULLETIN 035.
RFC43 LL AND RFC49 LL SLOPED FLOW RATES ARE IDENTICAL TO RFC43 AND RFC49.

3.
wise direction. In ceilings that have a plenum space above the
sprinkler, the plenum space may have neutral or negative pres-
surization but must not be positively pressurized. Inspect all
sprinklers after installation to ensure that the gap between the
cover plate and ceiling and the 4 slots in the cup are all open
and free from any air flow impediment.
Maintenance
Model RFC30 LL, RFC43 LL and RFC49 LL Concealed
Sprinklers should be inspected and the sprinkler system
maintained in accordance with NFPA25. Do not clean sprin-
klers with soap and water, ammonia or any other cleaning
fluids. Remove dust by using a soft brush or gentle vacuum-
ing. Remove any sprinkler cover plate assembly which has
been painted (other than factory applied) or damaged in
any way. A stock of spare sprinklers should be maintained
to allow quick replacement of damaged or operated sprin-
klers. Prior to installation, sprinklers should be maintained
in the original cartons and packaging until used to minimize
the potential for damage to sprinklers that would cause im-
proper operation or non-operation.
Model RFC30 LL, RFC43 LL and RFC49 LL
Residential Concealed Sprinkler Specification
Sprinklers shall be cULus Listed and NSF-61 Annex G
certified low flow residential concealed sprinklers with drop-
down deflector and adjustable flat cover plate engineered
for a minimum design density of 0.05gpm/ft2. Sprinkler
frame and deflector shall be of bronze frame construction
having a ½” NPT thread.
Thermal element shall consist of an approved black-
painted beryllium-nickel fusible solder link with symmetric
lever mechanism, maintaining a Teflon-coated Belleville
spring washer and machined brass cap water seal assem-
bly containing no plastic parts. Sprinkler K-factors shall be
a nominal 4.3 (62) and 4.9 (70), having a 3/8” and 7/16” orifice
respectively. Temperature rating shall be Ordinary 165°F
(74°C); cover plate temperature rating to be 135°F (57°C).
Cover plate assembly shall consist of a brass cover plate
and copper alloy retainer flange allowing a ½” cover plate
adjustment. Any secure engagement between the cover
plate and the cup will assure that the drop-down deflector is
properly located below the ceiling. A plastic protective cap
shall be provided and factory installed inside the sprinkler
cup to protect the drop-down sprinkler deflector from dam-
age, which could occur during construction before the cov-
er plate is installed. Standard cover finish: [Chrome] [White]
[Specialty – specify]. Residential concealed sprinklers shall
be Reliable Model RFC30 LL, SIN RA3211 (Bulletin 032),
RFC43 LL, SIN RA3212 (Bulletin 032) or Model RFC49 LL,
SIN RA3216 (Bulletin 032).
Ordering Information
Specify:
1. Sprinkler Model
2. Cover Plate Finish
3. Thread-On or
Push-On Feature
Cover Plate Finishes(1)
Standard Finishes
Chrome
White Paint
Special Application
Finishes(2)
Bright Brass
Finished Bronze
Black Plating
Black Paint
Off White
Satin Chrome
(1) Other finishes and colors are
available on special order.
Consult factory for details.
Coverplate custom paint is
semi-gloss, unless specified
otherwise.
(2) For the perforated style cover-
plate, consult factory for avail-
ability on these and other cus-
tom finishes.

The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Bulletin 033
Bulletin 033
Model F1 RES LL
Residential Sprinklers for
Design Density of .05 gpm/ft2
Types:
1. F1 Res 30 LL Pendent
2. F1 Res 30 LL Recessed Pendent/F2
3. F1 Res 30 LL Recessed Pendent/FP
4. F1 Res 49 LL Pendent
5. F1 Res 49 LL Recessed Pendent/F1
6. F1 Res 49 LL Recessed Pendent/FP
7. F1 Res 58 LL Pendent
8. F1 Res 58 LL Recessed Pendent/F1
9. F1 Res 58 LL Recessed Pendent/FP
10. F1 Res 30 LL CCP Pendent
11. F1 Res 49 LL CCP Pendent
12. F1 Res 58 LL CCP Pendent
13. F1 Res 44 LL HSW
14. F1 Res 44 LL Recessed HSW/F2
15. F1 Res 58 LL HSW
16. F1 Res 58 LL HSW Recessed HSW/F2
17. F1 Res 44 LL SWC
Listings & Approvals
1. Listed by Underwriters Laboratories Inc. and
UL Certified for Canada (cULus)
2. NSF Certified to NSF/ANSI Standard 61 Annex G (Less
than 0.25% Lead Content.)
Additional Bulletins applicable to all
F1RES LL Sprinklers
• Wall Wetting - Bulletin 007
• Slope Ceiling - Bulletin 035
• Design and Installation - Bulletin 140
UL Listing Category
Residential Automatic Sprinkler
UL Guide Number
VKKW
Patents
US Patent No. 6,516,893 applies to the
Model F1 Res 49 LL & 58 LL Pendent Sprinklers
Other patents pending.
Product Description
Model F1 Res LL Pendent sprinklers (Figs. 1, 2, 3, & 4) are
fast response sprinklers combining excellent durability, high
F1 Res 49 LL & 58 LL
Recessed Pendent/F1
F1 Res 49 LL & 58 LL Recessed
Pendent / F1
F1 Res 30 LL
Recessed Pendent/F2
F1 Res 44 LL & 58 LL
Recessed HSW/F2
F1 Res 30 LL, 49 LL & 58 LL
CCP Pendent
F1 Res 44 LL
SWC
sensitivity glass-bulb and low profile decorative design. The
F1 Res LL Horizontal Sidewall sprinklers (Figs. 5, & 6) are
equally attractive when above ceiling piping cannot be used.
The 3mm glass-bulb pendent sprinklers permit the efficient
use of residential water supplies for sprinkler coverage in resi-
dential fire protection design.
The low flow F1 Res LL sprinklers are specially engineered
for fast thermal response to meet the sensitive fire protection
application needs of the latest residential market standards
(UL 1626 Standard). Upon fire conditions, rising heat causes
a sprinkler’s heat-sensitive glass-bulb to shatter, releasing the
waterway for water flow onto the deflector, evenly distributing
the discharged water to control a fire.
Technical Data:
• Thermal Sensor: Nominal 3mm glass-bulb
• Sprinkler Frame : Brass
• Sprinklers’ Pressure Rating : 175 psi
Factory Hydrostatically Tested to 500 psi
• Thread Size: ½” NPT (R½)
• K-Factor: 3.0 (Actual) - F1 Res 30 LL Pendent Sprinkler
4.9 (Actual) - F1 Res 49 LL Pendent Sprinkler
5.8 (Actual) - F1 Res 58 LL Pendent & HSW Sprinkler
4.4 (Actual) - F1 Res 44 LL HSW Sprinkler
• Density: Minimum 0.05 gpm/ft2
Specifically Listed for use in Multipurpose Systems that serve both
domestic water and fire protection.
Model F1 Res LL Sprinklers Listed for the lowest flows to meet the
minimum design density of .05 gpm/ft2with potable water
F1 Res 30 LL, 49 LL & 58 LL
Pendent
F1 Res 44 LL & 58 LL
HSW

2.
Application
Model F1 Res LL Sprinklers are used for Residential Fire
Protection according to UL 1626 Standard*. Be sure that
orifice size, temperature rating, deflector style and sprinkler
type are in accordance with the latest published standards
of The National Fire Protection Association or the approving
authority having jurisdiction.
Installation
Models F1 Res LL sprinklers are to be installed as shown.
Model F1, F2 and FP Escutcheons, illustrated herewith, are
the only recessed escutcheons to be used with Model F1
Res LL sprinklers. Use of any other recessed escutcheon
will void all approvals and warranties. For installing Model
F1 Res LL Pendent sprinklers use only the Model D sprin-
kler Wrench; for installing Models F1 Res LL Recessed
Pendent, CCP & SWC sprinklers use only the Model GFR2
sprinkler wrench; for installing Model F1 LL Res Recessed
HSW sprinklers use only the Model GFR2 Sprinkler Wrench.
Use of wrenches other than those specified may damage
these sprinklers. Install F1 Res 44 LL with a ceiling to de-
flector distance of 4” - 12”. Flow arrow on deflector must
point away from near wall and “Top” marking must face
ceiling.
Escutcheon*, F1 or F2, Data:
Type Adjustment
Inch (mm)
“A”
Inch (mm)
Face of fitting
to ceiling
Inch (mm)
F1 3/4 (19.0) Min.=3/4” (19.1)
Max.=11/2” (38.1)
3/16 - 15/16
(4.7 - 24.0)
F2 1/2 (12.7) Min.=15/16” (23.8)
Max.=11/2” (38.1)
3/16 - 11/16
(4.7 - 17.4)
* Note: Escutcheons F1 or F2 may be used with
Model F1 Res 49 LL & 58 LL Recessed Pendent Sprinkler
• Model F1 Res 30 LL, 49 LL & 58 LL Pendent
• Model F1 Res 30 LL Recessed Pendent / F2
• Model F1 Res 49 LL & 58 LL Recessed Pendent / F1
Fig. 1 Fig. 2
F1 escutcheon, 3/4” (19mm) adjustment

3.
Technical Data: F1Res 30 LL Pendent and Recessed Pendent
Thread
Size
Nominal Orifice
Inch (mm)
Sprinkler
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient Temp.
Actual
K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C
½” NPT
(R½)
21/64” (8.2) 155
175
68
79 175 (12) 100 38 3.0 2.25 (57)
Deflector - to - ceiling
Maximum 1” (25mm) to 4” (100mm)
Max.
Sprinkler Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler Identification
Number (SIN)
12 x 12 (3,6 x 3,6) 8 (30.3) 7.0 (0,48) RA3311
14 x 14 (4,3 x 4,3) 10 (37.8) 11 (0,76)
Technical Data: F1Res 49 LL Pendent and Recessed Pendent.
Thread
Size
Nominal Orifice
Inch (mm)
Sprinkler
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient Temp.
Actual
K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C
½” NPT
(R½)
7/16” (11) 155
175
68
79 175 (12) 100 150
38
66 4.9 2.25 (57)
Deflector - to - ceiling
Maximum 1” (25mm) to 4” (100mm)
Max.
Sprinkler
Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6) 13 (49) 7.0 (0,48)
RA3316
14 x 14 (4,3 x 4,3) 13 (49) 7.0 (0,48)
16 x 16 (4,9 x 4,9) 13 (49) 7.0 (0,48)
18 x 18 (5,5 x 5,5) 17 (64.3) 12.0 (0,83)
20 x 20 (6,1 x 6,1) 20 (75.7) 16.7 (1,14)
Deflector - to - ceiling
Maximum 4” (100mm) to 8” (203mm)
Max.
Sprinkler
Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6) 15 (57) 9.4 (0,65)
RA3316
14 x 14 (4,3 x 4,3) 16 (60.5) 10.6 (0,73)
16 x 16 (4,9 x 4,9) 17 (64.3) 12.0 (0,83)
18 x 18 (5,5 x 5,5) 19 (72) 15.0 (1,0)
20 x 20 (6,1 x 6,1) 22 (83.2) 20.2 (1,4)
*Note: The F1 Res 49 LL pendent and recessed pendent residential
sprinklers can be installed per NFPA 13 in beamed ceilings meet-
ing the following criteria:
1. Maximum beam depth = 7” (178mm)
2. Beam spacing at or greater than 7.5 ft. (2.3m) on center.
Technical Data: F1Res 58 LL Pendent and Recessed Pendent.
Thread
Size
Nominal Orifice
Inch (mm)
Sprinkler
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient Temp. Actual
K Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C
½” NPT
(R½) ½” (13) 155 175
68
79 175 (12) 100 150
38
66 5.8 2.25 (57)
Max.
Sprinkler
Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Ceiling -to- Deflector
Inch (mm)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6) 16 (61) 7.6 (0,53)
1- 4
(25 - 100) RA3313
14 x 14 (4,3 x 4,3) 16 (61) 7.6 (0,53)
16 x 16 (4,9 x 4,9) 16 (61) 7.6 (0,53)
18 x 18 (5,5 x 5,5) 19 (72) 10.8 (0,75)
20 x 20 (6,1 x 6,1) 22 (83.3) 14.4 (1,0)

FP push-on/thread-off escutcheon
4.
• Model F1 Res 30 LL, 49 LL & 58
LL CCP Pendent
• Model F1 Res 30 LL, 49 LL & 58
LL Recessed Pendent / FP
Fig. 3 Fig. 4

5.
Technical Data: F1Res 30 LL CCP Pendent and Recessed Pendent/FP
Thread
Size
Nominal
Orifice
Inch (mm)
Sprinkler
Temp. Rating
CCP Assembly
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient Temp. K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C °F °C
½” NPT
(R½)
21/64” (8.2) 155 68 135 57 175 (12) 100 38 3.0 2.25 (57)
Max.
Sprinkler Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler Identification
Number
(SIN)
12 x 12 (3,6 x 3,6) 8 (30.3) 7.0 (0,48) RA3311
14 x 14 (4,3 x 4,3) 11 (41.6) 13.4 (0,92)
Technical Data: F1Res 49 LL CCP Pendent and Recessed Pendent/FP
Thread
Size
Nominal
Orifice
Inch
(mm)
Sprinkler
Temp.
Rating
CCP
Assembly
Temp.
Rating
Max.
Pressure
psi (bar)
Max.
Ambient
Temp.
K
Factor
Sprinkler
Length
Inch
(mm)
°F °C °F °C °F °C
½” NPT
(R½)
7/16” (11) 155 68 135 57 175 (12) 100 38 4.9 2.25 (57)
Max.
Sprinkler Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6) 13 (49) 7.0 (0,48)
RA3316
14 x 14 (4,3 x 4,3) 13 (49) 7.0 (0,48)
16 x 16 (4,9 x 4,9) 14 (53) 8.2 (0,56)
18 x 18 (5,5 x 5,5) 18 (68.1) 13.5 (0,93)
20 x 20 (6,1 x 6,1) 20 (75.7) 16.7 (1,14)
CCP Options Data:
“A”
Cover Adjustment
Inch (mm)
“B”
CCP Height
Inch (mm)
1/2(12.7) 15/16 (24)
5/16 (7.9) 3/4(19)
FP Data “A”:
FP Position “A”
Inch (mm)
Max. Recessed 7/16 (11)
Min. Recessed 15/16 (24)
Note: Sprinklers shown in Fig. 3 and Fig. 4
are not suitable for installation in ceil-
ings which have positive pressure in
the space above.
Technical Data: F1Res 58 LL CCP Pendent and Recessed Pendent/FP
Thread
Size
Nominal
Orifice
Inch (mm)
Sprinkler
Temp. Rating
CCP Assembly
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient Temp. K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C °F °C
½” NPT
(R½)
1/2” (13) 155 68 135 57 175 (12) 100 38 5.8 2.25 (57)
Max.
Sprinkler Spacing
ft (m)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler Identification
Number
(SIN)
12 x 12 (3,6 x 3,6) 16 (61) 7.6 (0,53)
RA3313
14 x 14 (4,3 x 4,3) 16 (61) 7.6 (0,53)
16 x 16 (4,9 x 4,9) 16 (61) 7.6 (0,53)
18 x 18 (5,5 x 5,5) 19 (72) 10.8 (0,75)
20 x 20 (6,1 x 6,1) 22 (83.3) 14.4 (1,0)

6.
• Model F1 Res 44 LL & 58 LL HSW
• Model F1 Res 44 LL & 58 LL Recessed
HSW/F2
F2 escutcheon,
1/2” (13mm) adjustment
Technical Data: F1Res 44 LL HSW & HSW/F2
Thread
Size
Nominal
Orifice
Inch (mm)
Sprinkler
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient
Temp.
K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C
½” NPT
(R½)
3/8” (10) 155
175
68
79 175 (12) 100 150
38
66 4.4 2.45 (62)
Escutcheon, F2, Data:
Type Adjustment
Inch (mm)
Face of Fitting
to wall
Inch (mm)
F2 1/2(13)
3/16 - 11/16
(4.7 - 17.4)
Max.
Sprinkler Spacing
ft (m)
“A”
Ceiling to
Deflector
Inch (mm)
Sprinkler Temp.
Rating
°F (°C)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6)
4 - 6
(101 - 152)
155 (68) 175 (79) 12 (45,4) 7.5 (0,52)
RA3331
14 x 14 (4,3 x 4,3) 155 (68) 175 (79) 14 (53,0) 10.2 (0,71)
16 x 16 (4,9 x 4,9) 155 (68) 175 (79) 16 (60,6) 13.3 (0,92)
16 x 18 (4,9 x 5,5) 155 (68) 175 (79) 18 (68,1) 16.8 (1,16)
18 x 18 (5,5 x 5,5) 155 (68) 175 (79) 19 (72,0) 18.7 (1,29)
16 x 20 (4,9 x 6,1) 155 (68) 175 (79) 23 (87,1) 27.4 (1,89)
12 x 12 (3,6 x 3,6)
6 - 12
(152 - 305)
155 (68) 175 (79) 14 (53,0) 10.2 (0,71)
14 x 14 (4,3 x 4,3) 155 (68) 175 (79) 16 (60,6) 13.3 (0,92)
16 x 16 (4,9 x 4,9) 155 (68) 175 (79) 17 (64,4) 15.0 (1,04)
16 x 18 (4,9 x 5,5) 155 (68) 175 (79) 20 (75,7) 20.7 (1,43)
16 x 20 (4,9 x 6,1) 155 (68) 175 (79) 23 (87,1) 27.4 (1,89)
Fig. 5

7.
Technical Data: F1Res 58 LL HSW & HSW/F2
Thread
Size
Nominal
Orifice
Inch (mm)
Sprinkler
Temp. Rating
Max.
Pressure
psi (bar)
Max.
Ambient
Temp.
K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C
½” NPT
(R½)
1/2” (13) 155
175
68
79 175 (12) 100 150
38
66 5.8 2.45 (62)
Escutcheon, F2, Data:
Type Adjustment
Inch (mm)
Face of Fitting
to wall
Inch (mm)
F2 1/2(13)
3/16 - 11/16
(4.7 - 17.4)
Technical Data: F1Res 44 LL SWC
Thread
Size
Nominal
Orifice
Inch (mm)
Sprinkler
Temp. Rating
Cover
Temp.
Rating
Max.
Pressure
psi (bar)
Max.
Ambient
Temp.
K
Factor
Sprinkler
Length
Inch (mm)
°F °C °F °C °F °C
½” NPT
(R½)
3/8” (10) 155 68 135 57 175 (12) 100 38 4.4 2.45 (62)
Max.
Sprinkler Spacing
ft (m)
“A”
Ceiling to
Deflector
Inch (mm)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6)
4 - 6
(101 - 152)
13 (49,2) 8.7 (0,60)
RA3331
14 x 14 (4,3 x 4,3) 14 (53,0) 10.2 (0,71)
16 x 16 (4,9 x 4,9) 17 (64,3) 15.0 (1,1)
16 x 18 (4,9 x 5,5) 19 (71,8) 18.7 (1,13)
16 x 20 (4,9 x 6,1) 23 (87,1) 27.4 (1,89)
12 x 12 (3,6 x 3,6)
6 - 12
(152 - 305)
14 (52,9) 10.2 (0,71)
14 x 14 (4,3 x 4,3) 15 (56,7) 11.7 (0,81)
16 x 16 (4,9 x 4,9) 18 (68,1) 16.8 (1,16)
16 x 18 (4,9 x 5,5) 20 (75,6) 20.7 (1,43)
• Model F1 Res 44 LL SWC
Fig. 6
Max.
Sprinkler Spacing
ft (m)
“A”
Ceiling to Deflector
Inch (mm)
Sprinkler Temp.
Rating
°F (°C)
Flow
gpm (Lpm)
Pressure
psi (bar)
Sprinkler
Identification
Number (SIN)
12 x 12 (3,6 x 3,6)
4 - 6
(101 - 152)
155 (68) 175 (79) 16 (60,6) 7.6 (0,53)
RA3333
14 x 14 (4,3 x 4,3) 155 (68) 175 (79) 18 (68,2) 9.7 (0,67)
16 x 16 (4,9 x 4,9) 155 (68) 175 (79) 21 (79,5) 13.2 (0,91)
16 x 18 (4,9 x 5,5) 155 (68) 175 (79) 25 (94,7) 18.6 (1,28)
16 x 20 (4,9 x 6,1) 155 (68) 175 (79) 29 (109,8) 25 (1,73)
12 x 12 (3,6 x 3,6)
6 - 12
(152 - 305)
155 (68) 175 (79) 22 (83,3) 14.4 (1,0)
14 x 14 (4,3 x 4,3) 155 (68) 175 (79) 22 (83,3) 14.4 (1,0)
16 x 16 (4,9 x 4,9) 155 (68) 175 (79) 26 (98,4) 20.1 (1,39)
16 x 18 (4,9 x 5,5) 155 (68) 175 (79) 31 (117,4) 28.6 (1,97)

Maintenance
Model F1 Res 30 LL, 49 LL, F1 Res 58 LL and F1 Res 44
LL Sprinklers should be inspected quarterly, and the sprin-
kler system maintained in accordance with NFPA 25, 13,
13D, and 13R. Do not clean sprinkler with soap and water,
Ammonia or any other cleaning fluids. Remove dust by us-
ing a soft brush or gentle vacuuming. Remove any sprin-
kler which has been painted (other than factory applied)
or damaged in any way. A stock of spare sprinklers should
be maintained to allow quick replacement of damaged or
operated sprinklers. Prior to installation, sprinklers should
remain in the original cartons and packaging until used.
This will minimize the potential for damage to sprinklers
that could cause improper operation or non-operation.
Model F1 Res 30 LL, 49 LL & 58 LL Pendent
Sprinkler Specifications
Sprinklers shall be [cULus Listed] [New York City MEA
Approved (258-93-E)] low flow residential pendent sprin-
klers engineered to provide a minimum design density of
0.05 gpm/ft2over the listed coverage area. Listed flows
as specified by the manufacturer’s technical data sheets
are to be used. Residential sprinklers shall be installed
in conformance with the manufacturer’s installation guide-
lines and the applicable installation standard. Where
pendent residential sprinklers are installed under sloped
ceilings having a pitch from [4/12] to [8/12], the sprinklers
shall be listed for such use. Deflector-to-ceiling distance
listing shall be 1” to 8” maximum. Sprinkler frame and de-
flector shall be of bronze frame construction having a ½”
NPT thread. Water seal assembly shall consist of a Teflon-
coated Belleville spring washer with top-loaded extruded
or cold head cup with 3 mm glass bulb containing no plas-
tic parts, and having a temperature rating of [155°F (68°C)]
[175°F (79°C)]. Sprinklers shall have a nominal K-factor of
3.0, 4.9 and 5.8. Standard finish: [Bronze] [Chrome-plated]
[White Polyester] [Special finish– specify]. Residential pen-
dent sprinklers shall be Reliable Model F1 Res 30 LL, 49 LL
& 58 LL, SIN RA3311, RA3316 & RA3313 (Bulletin 033).
Model F1 Res 49 LL & 58 LL Recessed
Pendent/F1
Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/F2
Model F1 Res 30 LL, 49 LL & 58 LL Recessed
Pendent/FP Specifications
Sprinklers shall be [cULus Listed] [New York City MEA
Approved (258-93-E)] low flow residential recessed pen-
dent sprinklers engineered to provide a minimum design
density of 0.05 gpm/ft2over the listed coverage area. List-
ed flows as specified by the manufacturer’s technical data
sheets are to be used. Residential sprinklers shall be in-
stalled in conformance with the manufacturer’s installation
guidelines and the applicable installation standard. Where
pendent residential sprinklers are installed under sloped
ceilings having a pitch from [4/12] to [8/12], the sprinklers
shall be listed for such use. Deflector-to-ceiling distance
listing shall be 1” to 8” maximum. Sprinkler frame and de-
flector shall be of bronze frame construction having a ½”
NPT thread. Water seal assembly shall consist of a Teflon-
coated Belleville spring washer with top-loaded extruded
or cold head cup with 3 mm glass bulb containing no plas-
tic parts, and having a temperature rating of [155°F (68°C)]
[175°F (79°C)]. Sprinklers shall have a nominal K-factor of
3.0, 4.9 & 5.8. Standard finish: [Bronze] [Chrome-plated]
[White Polyester] [Special finish– specify]. Recessed es-
cutcheon assembly shall be a steel, two-piece escutcheon
[with ½” adjustment (Model F2)] [with ¾” adjustment (Mod-
el F1)] [of push-on and thread off design with ½” adjust-
ment (Model FP)]. Standard finish shall be [brass][bright
chrome] [white painted]. Residential recessed pendent
sprinklers shall be Reliable [Model F1 Res 30 LL, 49 LL &
58 LL Recessed Pendent/F1] [Model F1 Res 30 LL, 49 LL
& 58 LL Recessed Pendent/F2] [Model F1 Res 30 LL, 49
LL & 58 LL Recessed Pendent/FP] SIN RA3311, RA3316 &
RA3313 (Bulletin 033).
Model F1 Res 30 LL, 49 LL & 58 LL CCP Pendent
(Concealed) Specifications
Sprinklers shall be [cULus Listed] [New York City MEA
Approved (258-93-E)] low flow residential concealed sprin-
klers engineered to provide a minimum design density of
0.05 gpm/ft2over the listed coverage area. Listed flows
as specified by the manufacturer’s technical data sheets
are to be used. Residential sprinklers shall be installed in
conformance with the manufacturer’s installation guidelines
and the applicable installation standard. Where pendent
residential sprinklers are installed under sloped ceilings
having a pitch from [4/12] to [8/12], the sprinklers shall be
listed for such use. Sprinkler frame and deflector shall be
of bronze frame construction having a ½” NPT thread. Wa-
ter seal assembly shall consist of a Teflon-coated Belleville
spring washer with top-loaded extruded or cold head cup
with 3 mm glass bulb containing no plastic parts, and hav-
ing a temperature rating of 155°F (68°C). Cover plate as-
sembly shall consist of a brass cover plate and copper al-
loy retainer flange. Method of attaching the cover plate to
the sprinkler cup shall be a push-on and thread-off design
allowing a ½” cover plate adjustment. Cover plate tem-
perature rating shall be 135°F (57°C). A plastic protec-
tive cap shall be provided and factory installed inside the
sprinkler cup to protect the sprinkler from damage, which
could occur during construction before the cover plate is
installed. Standard cover plate finish: [White] [Custom Col-
or– specify]. ]. Concealed pendent sprinklers shall be Reli-
able Model F1 Res 30 LL, 49 LL & 58 LL CCP, SIN RA3311,
RA3316 & RA3313 (Bulletin 033).
8.

9.
Model F1 Res 44 LL Horizontal Sidewall
Residential Sprinkler Specifications
Sprinklers shall be [cULus Listed] [New York City MEA
Approved (258-93-E)] low flow residential horizontal side-
wall sprinklers engineered to provide a minimum design
density of 0.05 gpm/ft2over the listed coverage area. List-
ed flows as specified by the manufacturer’s technical data
sheets are to be used. Residential sprinklers shall be in-
stalled in conformance with the manufacturer’s installation
guidelines and the applicable installation standard. Where
horizontal sidewall residential sprinklers are installed un-
der sloped ceilings having a pitch from [4/12] to [8/12], the
sprinklers shall be listed for such use. Sprinkler frame and
deflector shall be of bronze frame construction having a ½”
NPT thread. Water seal assembly shall consist of a Teflon-
coated Belleville spring washer with top-loaded extruded
or cold head cup with 3 mm glass bulb containing no plas-
tic parts, and having a temperature rating of [155°F (68°C)]
[175°F (79°C)]. Sprinklers shall have a nominal K-factor
of 4.4 (62.8). Standard finish: [Bronze] [Chrome-plated]
[White Polyester] [Special finish– specify]. Residential hori-
zontal sidewall sprinklers shall be Reliable Model F1 Res
44 LL, SIN RA3331 (Bulletin 033).
Model F1 Res 44 LL Recessed
Horizontal Sidewall Sprinkler Specifications
Use description for the Model F1 Res 44 horizontal side-
wall sprinkler with the following modifications: Replace
“horizontal sidewall sprinkler” with “recessed horizontal
sprinkler.” Add: Recessed escutcheon assembly shall be
a steel, two-piece escutcheon with ½” adjustment (Model
F2). Standard finish shall be [brass][bright chrome] [white
painted] [Special finish– specify]. Residential recessed
horizontal sidewall sprinklers shall be Reliable Model F1
Res 44 LL/F2, SIN RA3331 (Bulletin 033).
Finishes (1)
Standard Finishes
Sprinkler F1, F2, FP
Escutcheons Cover Plates
Bronze
Chrome Plated
White and Black Polyester
Coated
Brass
Bright Chrome Plated
White Painted
White Painted
Chrome
Special Application Finishes
Sprinkler F1, F2,
Escutcheons Cover Plates
Bright Brass
Black Plated
Black Paint
Off White
Satin Chrome
Bright Brass
Black Plated
Black Paint
Off White
Satin Chrome
Bright Brass
Black Plated
Black Paint
Off White
Satin Chrome
(1) Other finishes and colors are available on special order.
Consult factory for details.
Note: Paint or any other coating applied over the factory finish will void
all approvals and warranties.
Ordering Information
Specify:
1. Sprinkler Model
2. Sprinkler Type
3. Temperature Rating
4. Sprinkler Finish
5. Escutcheon Finish
6. Cover Plate Finish

Sprinkler spacing below single sloped ceilings with a maximum slope of 812 (33.7°) pitch.
5.

Sprinkler spacing below multiple sloped ceilings with a maximum slope of 812 (33.7°) pitch.
There must be an 8 in. lintel at the peak separating the 2 slopes.
6.

Model F1 Res 44 & 40 HSW and F1 Res 44 & 40 Recessed HSW/F2 installed below the slope ceiling.
8.
F1 Res 44
HSW
Horizontal Sidewall Sprinkler
(with discharge directed across the slope)
F1 Res 44
Recessed HSW/F2
Installation Guidelines
1. For systems designed in accordance with NFPA 13,
13D and 13R, where specific UL Listed flows are not
required, consult with the local Authority Having
Jurisdiction regarding the number of design sprinklers
for sloped ceilings having a pitch greater than 212 (9.4°).
2. Installation of UL Listed residential sprinklers under
sloped ceilings shall be limited to a type of unobstructed
construction consisting of smooth ceilings, as defined
by NFPA 13, having a maximum pitch of 4/12 (18.4°) or
8/12 (33.7°).
3. Spacing of residential sprinklers under sloped ceilings is
measured along the slope when determining the
distance off of walls and between sprinklers.
4. Measure listed areas of coverage along the sloped
ceiling. The actual floor coverage area will be less than
the listed area.
5. For coverage areas less than the listed coverage area
shown in Tables 1 through 5, use the minimum flow
requirement for the next largest listed coverage area.
6. Minimum spacing between pendent type sprinklers is 8
ft. (2.4 m). Minimum distance from a pendent type
sprinkler and an adjacent wall is 4" (102 mm).
7. Residential sprinklers located closest to the peak of the
ceiling shall have the deflectors located not more than
3 ft (1m) vertically down from the peak. Align deflectors
parallel with the ceiling slope 1" to 4" (25mm to 102mm)
below the sloped ceiling.
8. Hydraulic Requirements:
a. For NFPA 13D Systems, the number of design
sprinklers shall include all sprinklers within a
compartment, up to a maximum of two sprinklers
(where specific UL Listed flows are required) that
requires the greatest hydraulic demand.
b. For NFPA 13R Systems, the number of design
sprinklers shall include all sprinklers within a
compartment, up to a maximum of four (4) sprinklers
(where specific UL Listed flows are required), that
requires the greatest hydraulic demand.
c. For NFPA 13 systems, the design area shall be the
area that includes the four (4) hydraulically most
demanding sprinklers. The minimum required
discharge from each of the four hydraulically
demanding sprinklers shall be the greater of the
following:
(1) In accordance with the minimum flow rates
indicated by the individual listings (that already
will provide a minimum density of 0.1 gpm/ft2);or
(2) A calculated value based on delivering a
minimum of 0.1 gpm/ft2over the design area.
9. Because of the varied nature of residential construction
features, there will be some compartment designs which
cannot be fully sprinklered in accordance with NFPA 13,
13D, or 13R. In these instances, consult the Authority
Having Jurisdiction (AHJ) for guidance and approval.
This includes sloped ceilings having a pitch greater than
8/12 (33.7°).
10.Glass bulb sprinklers have orange bulb protectors to
minimize bulb damage during shipping, handling and
installation. REMOVE THIS PROTECTION AT THE TIME
THE SPRINKLER SYSTEM IS PLACE IN SERVICE FOR
FIRE PROTECTION. Removal of the protectors before
this time may leave the bulb vulnerable to damage.
RASCO wrenches are designed to install sprinklers
when covers are in place. REMOVE PROTECTORS BY
UNDOING THE CLASP BY HAND. DO NOT USE
TOOLS TO REMOVE THE PROTECTORS.
Horizontal Sidewall Sprinkler
(with discharge directed down the slope)

HSW sprinkler spacing below single sloped ceilings with a maximum slope of 812 (33.7°) pitch.
HSW Sprinkler spacing below multiple sloped ceilings with a maximum slope of 812 (33.7°) pitch.
There must be an 8 in. lintel at the peak separating the 2 slopes.
9.

1ProPEX®is a registered trademark ofUponor,Inc. ProPEX™ is a trademark of Uponor Ltd.
ProPEX®Lead-free (LF) Brass Male Threaded Adapter
Submittal Information
Revision E: July 11, 2016
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’sRepresentative:
Approved By:
Technical Data
Material:
C69300 Brass
Product Information and Application Use
ProPEX®Lead-free (LF) Male Threaded Adapters connect Uponor PEX tubing to male NPT
threads for use in hot and cold domestic potable water systems, residential fire safety and
hydronic radiant heating and cooling systems.1These adapters are safe for direct burial in soil.

Description Part
Number ABCWeight
Equiv.
Length
(ft.)
Cv
P r o P E X L F B r a s s M a le T h r e a d ed A d ap t er , ⅜ " P E X x ½ " N P T LF4523850 1.62" 0.875" HEX 0.50" NPT 0.11 lbs. N/A N/A
ProPEXLF Brass Male Threaded Adapter,½" PEX x ½" NPT* LF4525050 1.73" 0.875" HEX 0.50" NPT 0.12 lbs. 2.3 5
ProPEXLF Brass Male Threaded Adapter,½" PEX x ¾" NPT LF4525075 1.78" 1.125" HEX 0.75" NPT 0.20 lbs. 1.8 6.2
ProPEXLF Brass Male Threaded Adapter,¾" PEX x ¾" NPT* LF4527575 2.02" 1.125" HEX 0.75" NPT 0.20 lbs. 2.7 11.3
ProPEXLF Brass Male Threaded Adapter,¾" PEX x 1" NPT LF4527510 2.22" 1.375" HEX 1.00" NPT 0.32 lbs. 3.4 10.9
ProPEXLF Brass Male Threaded Adapter,1" PEX x ¾" NPT LF4521075 2.25" 1.250" HEX 0.75" NPT 0.26 lbs. 1.2 17.8
ProPEXLF BrassMale Threaded Adapter,1" PEX x 1" NPT* LF4521010 2.46" 1.375" HEX 1.00" NPT 0.38 lbs. 3.2 19.9
ProPEXLF Brass Male Threaded Adapter,1¼" PEX x 1¼" NPT* LF4521313 2.72" 1.750"HEX 1.25" NPT 0.62 lbs. 4.2 32.4
ProPEX LF Brass Male Threaded Adapter,1½" PEX x 1½" NPT*
LF4521515
3.00"
2.250" HEX
1.50" NPT
0.80 lbs.
5.5
39.3
ProPEXLF Brass Male Threaded Adapter,2" PEX x 2" NPT* LF4522020 3.86" 2.375" HEX 2.00" NPT 1.45 lbs. 5.6 78.6
ProPEXLF Brass Male Threaded Adapter,2½" PEX x 2½" NPT LF4522525 4.83" 3.25" HEX 2.50" NPT 3.10 lbs. 1.5 227.3
ProPEXLF Brass Male Threaded Adapter,3" PEX x 3" NPT LF4523030 5.53" 3.75" HEX 3.00" NPT 4.90 lbs. 9.1 187.5
Installation
Use the appropriate ProPEX Ring for PEX-a tubing. Refer to the Uponor AquaPEX®Professional Plumbing Installation Guide, AquaSAFE™ Residential Fire
Sprinkler Installation Guide or Uponor Radiant Installation Handbook for additional information.
Standards
ASTM F877; ASTM F1960; CAN/CSA B137.5; NSF 14; NSF 61; NSF 372
Codes
IBC; IMC;IPC; IRC; NPC of Canada; NSPC; UMC; UPC
Listings
cNSFus-pw-G; cNSFus-rfh; *HUD MR 1269; IAPMO 3558; ICC-ES-PMG-1006; ICC-ES-PMG-1012; *UL 1821; *ULC/ORD-C199P; U.P. Code
Related Applications Contact Information
PEX-a Plumbing Systems
Radiant Heating andCooling Systems
Snow and Ice Melting Systems
Permafrost Protection Systems
Turf ConditioningSystems
AquaSAFE FireSafetySystems
Uponor, Inc.
5925 148th StreetWest
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
✔
✔
✔
✔

1ProPEX®is a registered trademark of Uponor, Inc. ProPEX™ is a trademark of Uponor Ltd.
2Visit listing agency’s website for complete information. 3For ½", ¾", 1", 1¼", 1½" and 2" pipe only. 4For ¾" to 3" pipe.
Uponor AquaPEX® White, Coils
Submittal Information
Revision K: Dec. 7, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material:
Crosslinked polyethylene PEX-a Engel Method; PEX 5106
Standard Grade Hydrostatic
Ratings (PPI):
200°F (93°C) at 80 psi (551 kPa)
180°F (82°C) at 100 psi (689 kPa)
73.4°F (23°C) at 160 psi (1,103 kPa)
½", ¾", 1", 1¼", 1½" and 2" Uponor AquaPEX®White only:
120°F (49°C) at 130 psi (896 kPa)
Linear Expansion Rate:
1.1"/10°F/100' (27.94mm/5.56°C/30.48m)
Product Information and Application Use
Uponor AquaPEX White is used for hot and cold domestic potable water distribution and residential fire
safety as well as radiant heating/cooling and hydronic piping systems containing no ferrous corrodible
components or where ferrous components are isolated from the piping.

Description
Part Number
I.D.
O.D.
Weight
¼" Uponor AquaPEX White, 100-ft. coil
⅜" Uponor AquaPEX White, 400-ft. coil
⅜" Uponor AquaPEX White, 1,000-ft. coil
½" Uponor AquaPEX White, 100-ft. coil
½" Uponor AquaPEX White, 300-ft. coil
½" Uponor AquaPEX White, 500-ft. coil
½" Uponor AquaPEX White, 1,000-ft. coil
⅝" Uponor AquaPEX White, 300-ft. coil
⅝" Uponor AquaPEX White, 1000-ft. coil
¾" Uponor AquaPEX White, 100-ft. coil
¾" Uponor AquaPEX White, 300-ft. coil
¾" Uponor AquaPEX White, 500-ft. coil
1" Uponor AquaPEX White, 100-ft. coil
1" Uponor AquaPEX White, 300-ft. coil
1" Uponor AquaPEX White, 500-ft. coil
1¼" Uponor AquaPEX White, 100-ft. coil
1¼" Uponor AquaPEX White, 300-ft. coil
1½" Uponor AquaPEX White, 100-ft. coil
1½" Uponor AquaPEX White, 300-ft. coil
2" Uponor AquaPEX White, 100-ft. coil
2" Uponor AquaPEX White, 200-ft. coil
2" Uponor AquaPEX White, 300-ft. coil
2½" Uponor AquaPEX White, 100-ft. coil
2½" Uponor AquaPEX White, 300-ft. coil
3" Uponor AquaPEX White, 100-ft. coil
3" Uponor AquaPEX White, 300-ft. coil
F1040250
F1090375
F1120375
F1040500
F1060500
F1100500
F1120500
F1060625
F1120625
F1040750
F1060750
F1100750
F1041000
F1061000
F1101000
F1061250
F1021250
F1061500
F1021500
F1062000
F1052000
F1022000
F1062500
F1022500
F1063000
F1023000
0.241"
0.350"
0.350"
0.475"
0.475"
0.475"
0.475"
0.574"
0.574"
0.671"
0.671"
0.671"
0.862"
0.862"
0.862"
1.054"
1.054"
1.244"
1.244"
1.629"
1.629"
1.629"
2.011"
2.011"
2.400"
2.400"
0.375"
0.500"
0.500"
0.625"
0.625"
0.625"
0.625"
0.750"
0.750"
0.875"
0.875"
0.875"
1.125"
1.125"
1.125"
1.375"
1.375"
1.625"
1.625"
2.125"
2.125"
2.125"
2.625"
2.625"
3.125"
3.125"
4.0 lbs.
20.0 lbs.
44.0 lbs.
6.0 lbs.
18.0 lbs.
27.6 lbs.
54.0 lbs.
28.0 lbs.
86.0 lbs.
10.0 lbs.
34.0 lbs.
54.0 lbs.
20.0 lbs.
56.0 lbs.
93.0 lbs.
34.0 lbs.
106.0 lbs.
44.0 lbs.
133.0 lbs.
68.2 lbs.
136.4 lbs.
204.6 lbs.
88.0 lbs.
264.0 lbs.
128.0 lbs.
384.0 lbs.
Installation
Use ProPEX®fittings for ⅜" through 3" pipe.1Refer to the Uponor Professional Plumbing Installation Guide, Complete Design Assistance Manual
(CDAM), Hydronic Piping Design Assistance Manual (HPDAM) or AquaSAFE™ Residential Fire Sprinkler Installation Guide for more information.
Listings2
Codes
Standards
cNSFus-fs3; cNSFus-pw; cQAIus P321;
UL; CSA; ETL; PPI TR-4; ICC-ES; BMEC;
CCMC
IAPMO; ICC; IPC; IMC;
IRC; UPC; UMC; NSPC;
HUD; UFGS; NPC of
Canada; NBC of Canada
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960;
ASTM F2023; ASTM E84; CAN/ULC S102.2; ASTM E119/UL 263;
CAN/ULC S101; ASTM E814/ULC S115; CSA B137.5; CSA B214;
UL 18213; ULC/ORD-C199P3; AWWA C9044
Related Applications
Contact Information
PEX-a Plumbing Systems
AquaSAFE™ Fire Safety Systems
Radiant Heating and Cooling Systems
Hydronic Piping Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
✔
✔
✔
✔

1ProPEX®is a registered trademark of Uponor, Inc. ProPEX™ is a trademark of Uponor Ltd.
2Visit listing agency’s website for complete information.
3For ½", ¾", 1", 1¼", 1½" and 2" tubing only.
4For ¾" tubing and larger.
Uponor AquaPEX®White, Straight Length
Submittal Information
Revision I: Dec. 7, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material:
Crosslinked polyethylene PEX-a Engel Method;
PEX 5106
Standard Grade
Hydrostatic Ratings (PPI):
200°F (93°C) at 80 psi (551 kPa)
180°F (82°C) at 100 psi (689 kPa)
73.4°F (23°C) at 160 psi (1,103 kPa)
½", ¾", 1", 1¼", 1½" and 2" Uponor AquaPEX®White
piping only: 120°F (49°C) at 130 psi (896 kPa)
Linear Expansion Rate:
1.10"/10°F/100' (27.94mm/5.56°C/30.48m)
Product Information and Application Use
Uponor AquaPEX White, straight length pipe, is used for hot and cold domestic
potable water distribution, residential fire safety and radiant heating and cooling and
hydronic piping systems containing no ferrous corrodible components or where
ferrous components are isolated from the piping.

Description
Part Number
A
B
Weight
½" Uponor AquaPEX White, 20-ft. straight length, 500 ft. (25 per bundle)
¾" Uponor AquaPEX White, 20-ft. straight length, 300 ft. (15 per bundle)
1" Uponor AquaPEX White, 20-ft. straight length, 200 ft. (10 per bundle)
1¼" Uponor AquaPEX White, 20-ft. straight length, 100 ft. (5 per bundle)
1½" Uponor AquaPEX White, 20-ft. straight length, 100 ft. (5 per bundle)
2" Uponor AquaPEX White, 20-ft. straight length, 100 ft. (5 per bundle)
2½" Uponor AquaPEX White, 10-ft. straight length, 30 ft. (3 per bundle)
2½" Uponor AquaPEX White, 20-ft. straight length, 60 ft. (3 per bundle)
3" Uponor AquaPEX White, 10-ft. straight length, 30 ft. (3 per bundle)
3" Uponor AquaPEX White, 20-ft. straight length, 40 ft. (2 per bundle)
F1930500
F1930750
F1921000
F1921250
F1921500
F1922000
F1912500
F1922500
F1913000
F1923000
0.475"
0.671"
0.862"
1.054"
1.244"
1.629"
2.011"
2.011"
2.400"
2.400"
0.625"
0.875"
1.125"
1.375"
1.625"
2.125"
2.625"
2.625"
3.125"
3.125"
28.0 lbs.
31.0 lbs.
35.0 lbs.
32.0 lbs.
42.0 lbs.
68.1 lbs.
26.4 lbs.
52.8 lbs.
38.5 lbs.
51.3 lbs.
Installation
Use ProPEX®fittings for ½" to 3" pipe.1Refer to the Uponor Professional Plumbing Installation Guide, Complete Design Assistance Manual
(CDAM), Hydronic Piping Design Assistance Manual (HPDAM) or AquaSAFE™ Residential Fire Sprinkler Installation Guide for more information.
Listings2
cNSFus-fs3; cNSFus-pw; cQAIus P321; UL; CSA; ETL; PPI TR-4; ICC-ES; BMEC; CCMC
Codes
IAPMO; ICC; IPC; IMC; IRC; UPC; UMC; NSPC; HUD; UFGS; NPC of Canada; NBC of Canada
Standards
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; ASTM E84; CAN/ULC S102.2; ASTM E119/UL 263;
CAN/ULC S101; ASTM E814/ULC S115; CSA B137.5; CSA B214; UL 18213; ULC/ORD-C199P3; AWWA C9044
Related Applications
Contact Information
PEX-a Plumbing Systems
AquaSAFE™Residential Fire Safety Systems
Radiant Heating and Cooling Systems
Hydronic Piping Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
Uponor Ltd.
2000 Argentia Rd., Plaza 1, Ste. 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
✔
✔
✔
✔

1ProPEX®is a registered trademark of Uponor, Inc. ProPEX™ is a trademark of Uponor Ltd.
2Visit listing agency’s website for complete information; 3For ½", ¾", 1", 1¼", 1½" and 2" tubing only; 4For ¾" tubing and larger.
ProPEX®Ring
Submittal Information
Revision G: July 17, 2015
Project Information
Job Name:
Location:
Part No. Ordered:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Manufacturer’s Representative:
Approved By:
Technical Data
Material:
Engel-method Crosslinked Polyethylene (PEX-a)
Density:
926 to 940 kg/m3
Degree of crosslinking:
70% to 89%
Product Information and Application Use
Uponor ProPEX®Rings are required to make a proper ProPEX connection.1The
ProPEX Ring with Stop includes a leading edge chamfer and stop edge.

Description
Part Number
Length
I.D.
O.D.
Weight
ProPEX Ring, ⅜"
ProPEX Ring with Stop, ½"
ProPEX Ring with Stop, ⅝"
ProPEX Ring with Stop, ¾"
ProPEX Ring with Stop, 1"
ProPEX Ring with Stop, 1¼"
ProPEX Ring with Stop, 1½"
ProPEX Ring with Stop, 2"
ProPEX Ring with Stop, 2½"
ProPEX Ring with Stop, 3"
Q4690302
Q4690512
Q4690625
Q4690756
Q4691000
Q4691250
Q4691500
Q4692000
Q4692500
Q4693000
0.54"
0.63"
0.79"
0.87"
1.10"
1.35"
1.61"
1.97"
2.61"
3.12"
0.49"
0.63"
0.75"
0.88"
1.13"
1.38"
1.63"
2.14"
2.66"
3.16"
0.74"
0.87"
1.00"
1.13"
1.42"
1.66"
1.91"
2.61"
3.25"
3.87"
0.005 lbs.
0.006 lbs.
0.008 lbs.
0.012 lbs.
0.020 lbs.
0.030 lbs.
0.040 lbs.
0.133 lbs.
0.230 lbs.
0.400 lbs.
Installation
Square cut the Uponor PEX tubing. Remove excess material. Slide the ProPEX Ring over the end of the tubing (maximum 1 /
16" over-hang for
rings without stop). When using the ProPEX Ring with Stop, slide the ring on the tubing with the chamfered edge first until the end of the
tubing contacts the stop edge. Expand the tubing and ring. If using the ProPEX Manual Expander Tool, rotate the tool a quarter turn after
each expansion to prevent the formation of grooves. Remove the expansion tool and fully seat the tubing and ring against the shoulder of the
fitting. Make ProPEX connections at temperatures above 5°F/-15°C. For more information, refer to the Uponor Professional Plumbing
Installation Guide, the AquaSAFE™Fire Safety Installation Guide or the Uponor Radiant Installation Handbook.
Listings2
cNSFus-fs3; cNSFus-pw; cNSFus-rfh; cQAIus; UL; CSA; WH; ETL; PPI TR-4; ICC-ES; IAPMO; BMEC; CCMC; cQAIus P321
Codes
ICC; IPC; IMC; IRC; UPC; UMC; NSPC; HUD; UFGS; NPC of Canada; NBC of Canada
Standards
ANSI/NSF 14; ANSI/NSF 61; ASTM F876; ASTM F877; ASTM F1960; ASTM F2023; ASTM E84; CAN/ULC S102.2; ASTM E119/UL 263;
CAN/ULC S101; ASTM E814/ULC S115; AWWA C9044; CSA B137.5; CSA B214; UL 18213; ULC/ORD-C199P3
Related Applications
Contact Information
PEX-a Plumbing Systems
AquaSAFE Fire Safety Systems
Hydronic Radiant Heating and Cooling Systems
Snow Melting Systems
Turf Conditioning Systems
Permafrost Prevention Systems
Uponor, Inc.
5925 148th Street West
Apple Valley, MN 55124 USA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
Uponor Ltd.
2000 Argentia Road, Plaza 1, Suite 200
Mississauga, ON L5N 1W1 CANADA
Phone: [phone]
Fax: [phone]
www.uponorpro.com
✔
✔
✔
✔