ReSound LiNX 3D 88 User manual

Quick guide
ReSound LiNX 3D™ 88

Product: ReSound LiNX 3D
Model: 88
Serial number (R):
_______________________________
Serial number (L):
_______________________________
Battery size: 13
My hearing aid information

Program Button (A):
ACTION RESULT
SHORT push Program change
LONG push
Activate streaming
(if enabled by
professional)
Volume Control (C):
ACTION RESULT
Press UP Volume increases
Press DOWN Volume decreases
PROGRAM WHEN TO USE BEEPS
11
22
33
44
Programs:
(if set up by your hearing care professional)

A. Program button
B. Microphones
C. Volume control
D. Battery door
E
A
C
B
View ReSound hearing aid tutorial videos at youtube.com/resoundus
E. Right/Left indicator
F. Groove for DAI/FM boot
G. Earhook
H. Earmold and
tubing
D
Traditional fitting
(earmold and tube)
6
1
5
4
3
2
8/9
10
7
8/9
11
12
13
14
18.c
18.b
9
1. Program button
2. Battery compartment & On/Off switch
3. Sound outlet
4. Front microphone inlet
5. Back microphone inlet
6. Volume control (optional)
7. Direct audio input
8. Left/Right indicator (Left=Blue/Right=Red)
9. Battery lock (optional)
10. Model
11. Manufacturer
12. Serial number
13. LED indicator (optional)
14. Battery lock release (optional)
15. Earhook
16. Earmold and tubing
17. Thin Tube
18. Domes/earmold
a. Open dome
b. Tulip-Dome
c. Custom earmold
19. Sports lock (optional)
400144011-US-13.09-Rev.E.indd 9 25-09-2013 14:42:17
6
1
5
4
3
2
8/9
10
7
8/9
11
12
13
14
18.c
18.b
9
1. Program button
2. Battery compartment & On/Off switch
3. Sound outlet
4. Front microphone inlet
5. Back microphone inlet
6. Volume control (optional)
7. Direct audio input
8. Left/Right indicator (Left=Blue/Right=Red)
9. Battery lock (optional)
10. Model
11. Manufacturer
12. Serial number
13. LED indicator (optional)
14. Battery lock release (optional)
15. Earhook
16. Earmold and tubing
17. Thin Tube
18. Domes/earmold
a. Open dome
b. Tulip-Dome
c. Custom earmold
19. Sports lock (optional)
400144011-US-13.09-Rev.E.indd 9 25-09-2013 14:42:17
H
G
F
Get to know your hearing aid

Getting started: On/O function
ON: Insert battery & completely
close battery door (D).
Program 1 will be active.
OFF: Open the battery door (D). Use
fingertip to pull it all the way.
ON
OFF
What you need to know Inserting/Replacing the battery:
1. Open the battery door (D)
completely
by using
your fingertip.
2. Remove protective sticker from
battery and wait 2 minutes before
inserting the
battery into the
hearing aid to
allow full activation of the battery.
3. Insert the new battery
with the positive
side (flat side) in
the correct position,
as shown.
4. Gently close the battery door. If it
doesn’t close easily, check to see
if the battery is upside down.

Connecting audio boot and
integrated FM
1. Align the tip of the audio boot
or integrated FM boot with
designated groove (F).
2. Once in place, move the boot in
the direction of the battery
compartment.
3. Gently click the boot onto the
hearing instrument.
Disconnecting audio boot and
integrated FM
1. Press and hold the button on the
front side of the audio boot. For an
FM boot, slide the latch downward
with your finger nail.
2. Gently remove the boot from the
hearing instrument.
Connecting/disconnecting direct
audio boot or integrated FM
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean
the hearing aids using a soft cloth
or tissue.
Weekly: Clean tubes and earmold (H).
1. Remove earmolds and tubing
from hearing aid prior to cleaning.
2. Clean earmold using mild soap,
remove any residual.
3. After cleaning, dry earmolds
thoroughly, remove any residual
water and debris from the tubing
utilizing an air bulb and wire loop.
Regular care & maintenance

Flight mode:
Some airlines prohibit the use of
wireless hearing aids (RF
transmitters) onboard. If required by
your airline, enable flight mode:
Disable wireless operation by
opening and closing the battery door
(D) three times within ten seconds
(open-close, open-close, open-close).
Your instruments will now be in
flight mode.
The hearing aids must function in
flight mode for 10 seconds before
wireless operation can be re-enabled.
To re-enable wireless operation,
open and close the battery door one
time and wait thirty seconds before
opening the battery door again to
avoid accidentally entering flight
mode again.
Direct Audio Integrated FM
1.
2.
1.
2.
3.

BEEP/TONE INDICATION ACTION REQUIRED
Ding, ding, ding, dong Low battery Change battery
Ding (5 or 10) Hearing aid is starting up After dings cease, hearing
aid is turned on
Ding-ding,
ding-ding, etc.
Hearing aid is in flight mode Use in flight mode if desired,
or open-close battery door
to exit flight mode
Ripple tone Hearing aid is in
streaming mode
Use with wireless accessory
or press multi-function
button to exit streaming
mode
Beep/tone indicators
View ReSound hearing aid tutorial videos at youtube.com/resoundus

Troubleshooting
SYMPTOM CAUSE POSSIBLE REMEDY
No sound Battery door not closed
Dead battery
Battery door will not close
Blocked earmold or tube
Turn on by closing the battery door (D)
Replace battery
Insert battery properly
Clean earmold or tube (H)
Not loud enough Blocked earmold
Change in hearing, volume too low
Excessive ear wax
Clean earmold (H)
Consult your hearing care professional
Consult your hearing care professional
Excessive
whistling/feedback
Incorrect earmold placement
Excessive ear wax
If none of the above
Re-insert earmold carefully
Clean guard/consult your hearing care professional
Consult your hearing care professional
Wireless does not work Device may be in flight mode Open and close the battery compartment once.
Wireless operation will reactivate ten seconds later.
If there are any other problems not mentioned in this guide, please contact ReSound or your hearing care professional.

400709011 Rev A 2017.02
Refer to the user guide included in
your hearing aid box.
Your hearing care professional can
be reached at:
View ReSound hearing aid tutorial
videos at youtube.com/resoundus.
ReSound Government Services
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.800.392.9932
www.resound.com/veterans
Manufacturer according
to FDA:
ReSound North America
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.888.735.4327
resound.com
Manufacturer according
to Health Canada:
ReSound Canada
303 Supertest Road
Toronto, Ontario M3J 2M4
1.888.737.6863
resound.com
For more information