READ BEFORE YOU BEGIN
• CLEAR A SPACE TO WORK ON
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN
• EACH PLASTIC PART IS IDENTIFIED BY A
PART NUMBER
• DO NOT OVER TIGHTEN SCREWS
• SEE NOTE ABOUT APPLYING STICKERS
IN STEP #12
CAUTION:
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY SNAP
TOGETHER ONCE.
Á LIRE AVANT DE COMMENCER
• DÉGAGGEZ UN ESPACE POUR TRA-
VAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE
AVANT DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE
UN NUMÉRO DE PIÉCE.
• NE SERREZ PAS TROP LES VIS.
• LISEZ LA RE MARQUE CONCERNANT
L´APPLICATION DES AUTO COLLANTS,
´A L´ ÉTAPE 12.
MISE EN GARDE:
POSITIONNEZ AVEC PRÉCAUTION TOUTES
LES PIÉCES DE CE MODÉLE RÉDUIT, CAR
VOUS NE POUVEZLES EMBOîTER QU’UNE
SEULE FOIS.
Ford Expedition
Ford's hot selling SUV, the Expedition becomes even
hotter with its larger diameter wheels and low profile
tires mounted on a lowered suspension. This SUV is
no longer just a vehicle for transporting groceries. It
now shows off the latest look in the automotive world,
long and low. Throw a wild and crazy paint job into
the mix, and you've achieved that certain look that
makes this truck so
special.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road,
Northbrook, Illinois 60062
Be sure to include the plan number (85192200200), part number, description,
your return address and phone number.
Visit our website: www.revell-monogram.com
* APPLY STICKERS
*APPLIQUEZ LES AUTO-COLLANTS
* OPTIONAL PARTS
* PIECES EN OPTION
REVELL-MONOGRAM LLC Northbrook, IL. Copyright © 2003. All rights reserved.
KIT 1922 85192210200
Step 12
ANY UNUSED PARTS MAY BE DISCARDED
Sticker Placement Guide Parts Included
NOTE:
When applying stickers, avoid touching the “sticky” side to prevent finger prints on stickers. Bend sticker sheet slightly to lift edge of sticker & use a fingernail to lift
sticker from sheet. Line up sticker on body and press an edge into place, slowly working sticker with a finger nail until sticker is fully on model.
REMARQUE :
Pendant l’application des autocollants, éviter de toucher à la face collante pour ne pas laisser d’empreintes. Plier légèrement la feuille d’autocollants pour relever le
bord d’un autocollant, et le détacher de la feuille avec le bout d’un ongle. Aligner l’autocollant sur la carrosserie, appuyer pour coller un de ses bords, et continuer de
l’appliquer lentement du bout de l’ongle jusqu’à ce qu’il soit complètement collé sur le modèle réduit.
Step 11Step 10
9
45
14
(NOT USED)
13
15
16 17
3
6
12
124
23
22
21
CHROME
BODY
TRANSPARENT
GRAY
TRANSPARENT RED
TIRES
METAL AXLES
SCREWS
26
28
27
1
2
10
18
11
19
31 30
Screws
23
Rear Bumper
(Chrome)
28
Right Side
Headlight
(Transparent
Gray)
27
Left Side
Headlight
(Transparent
Gray)
21
Front Grille
(Chrome)
16
Right Side
Mirror
17
Left Side
Mirror
15
Roof Rack
Supports
4
7
REPEAT ON OTHER SIDE
USING DECAL 8
5
REPEAT ON OTHER SIDE
USING DECAL 6
2
(OR DECAL 3)
9
