Ricoh Aficio GX7000 Manual

Ricoh GX7000 — Mac OS X — ICC Prole
Setup and Print Guide: Photoshop Elements 8 & 9
PAGE 1 of 10 >>
IMPORTANT: Before proceeding, please be sure you have the correct ICC Prole installed. For
assistance with ICC Prole installation, refer to the Installation Guide.
1.) Begin by opening an image in Photoshop Elements 8 or 9. Then, in the menu bar, click Edit > Color
Settings. This will open the Color Settings window (see FIGURE 1). Select the radio button for
Always Optimize for Printing and click OK to continue.
FIGURE 1
1
2
Photoshop’s color space needs to be set to the working space in which the ICC prole was created. This allows
for a more accurate screen display of your images. However, the accuracy of the displayed image on your monitor
depends more on the quality of the monitor and, more importantly, whether or not it has been calibrated with the
Monitor Manufacturer’s ICC prole.
Setup Guide - Photoshop Elements 8 & 9

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 2:10)
PAGE 2 of 10 >>
FIGURE 2
2.) Next, congure the Working Space. In the menu bar, click Image > Mode > RGB Color. A check
mark should now be visible beside RGB Color (see FIGURE 2).
1
3
2
3.) Finally, congure the Embedded Prole. In the menu bar, click Image > Convert Color Prole >
Convert to Adobe RGB Prole (see FIGURE 3).
FIGURE 3
1
3
2
Congratulations! The Photoshop RGB Working Space setup is now complete.

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 3:10)
PAGE 3 of 10 >>
1.) Once your image is ready to print, in the menu bar, click File > Print. This will open the Print
window (see FIGURE 4). Match your settings to the ones shown below:
Print Guide - Photoshop Elements 8 & 9
FIGURE 4
A
B L
A. Click the drop-down arrow and select GelSprinter GX7000
B. At the bottom of the Print window, click More Options
H
C. In the More Options window, click Color Management (see FIGURE 5).
FIGURE 5
G
E
D
F
C
D. Click the drop-down arrow and select Color Handling: Photoshop Elements Manages Color
E. Click the drop-down arrow and select Printer Prole: sg_GX7000_IQr_RGB_v2
sg_GX7000_IQr_RGB_v2

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 4:10)
PAGE 4 of 10 >>
F. Click the drop-down arrow and select Rendering Intent: Perceptual
G. Click OK to save your settings (see FIGURE 5). Clicking OK will return you to the Print window
(see FIGURE 4).
H. At the bottom of the Print window, click Page Setup (see FIGURE 4). This will open the Page
Setup window (see FIGURE 6).
FIGURE 6
I. Click the drop-down arrow and select Format For: GelSprinter GX7000
J. Click the drop-down arrow and select Paper Size: same as Transfer Paper
K. Click OK to continue. This will return you to the Print window (see Figure 4).
I
J
K
L. Click Print to continue (see FIGURE 4).
2.) Once Print has been selected, the following Print window will appear (see FIGURE 7). Remember
to Mirror the image before printing. You are able to do this within the OEM printer driver or you
may choose to manually mirror each image within Photoshop. To mirror the image using the printer
driver, Check Flip horizontally (see FIGURE 7).
FIGURE 7
1

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 5:10)
PAGE 5 of 10 >>
3.) Click the drop-down arrow and select Paper Feed (see FIGURE 8).
FIGURE 8
1
2
4.) In the paper feed window you are able to select the printer’s paper source. We recommend using
Auto Select unless you have purchased a Bypass Tray. For those users printing with a Bypass Tray,
you will instead select Bypass Tray (see FIGURE 9).
FIGURE 9
1
2
5.) Click the drop-down arrow and select Printer Features (see FIGURE 10). This will open the Print
Features window (see FIGURE 11).
1
2
FIGURE 10

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 6:10)
PAGE 6 of 10 >>
6.) Match your settings to those shown below: (see FIGURE 11)
FIGURE 11
A
B
C
D
E
A. Click the drop-down arrow and select Color / Black and White: Color
B. Click the drop-down arrow and select Paper type: Inkjet Plain Paper
C. Click the drop-down arrow and select Resolution: 600 dpi
D. Click the drop-down arrow and select Bi-/Uni-directional printing: Unidirectional
E. Click the drop-down arrow and select Economy Color: Off
NOTE: When choosing Paper Type, you will receive the following window (see FIGURE 12).
Click Continue to proceed.
FIGURE 12

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 7:10)
PAGE 7 of 10 >>
7.) Click the drop-down arrow and select Image Adjustments (see FIGURE 13).
1
2
FIGURE 13
8.) Match your settings to those shown below: (see FIGURE 14)
A
B
FIGURE 14
A. Click the drop-down arrow and select Dithering: Use error diffusion
B. Click the drop-down arrow and select Color prole: Off

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 8:10)
PAGE 8 of 10 >>
9.) Click the drop-down arrow and select Printer Conguration (see FIGURE 15).
FIGURE 15
10.) Match your settings to those shown below: (see FIGURE 16)
A
B
A. Check Do not print blank pages
B. Check Quick Paper Feed
FIGURE 16
1
C
C. Check Unidirectional print when selector is Envelope
D
2
D. Click the drop-down arrow and select Sheet-dry print delay in duplex: Off

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 9:10)
PAGE 9 of 10 >>
11.) To save your new preset, click the drop-down arrow and select Save As.... (see FIGURE 17).
12.) Name your new preset accordingly and click OK when complete (see FIGURE 18).
2
1
FIGURE 17
FIGURE 18
2
1

SubliJet-R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Photoshop Elements 8 & 9 (Continued; Page 10:10)
PAGE 10 of 10 >>
FIGURE 19
13.) You can now print your image by clicking Print (see FIGURE 19).
Congratulations! Photoshop setup is now complete. Remember to select GelSprinter GX7000 each time
you are ready to print.
NOTE: For the absolute latest Information and Updates on all Products, Materials, Processes,
and/or Procedures relative to all offerings by or through Sawgrass Technologies, Inc.,
please refer to our Website: www.sawgrassink.com