ring BT88LP000CH000 User manual

Install your Ring Doorbell Pro
1

Welcome
Hi, I’m Jamie Siminoff,
inventor of your Ring
Video Doorbell.
Congratulations on
purchasing the world’s
most advanced doorbell!
With Ring, you’ll always
know who’s at your door,
whether you’re across town,
on vacation, or just can’t
come to the door. As my
wife likes to say, “Ring is like
caller ID for the front door.”
22

If you need
extra help…
Ring Community Support is
available 7 days a week, and
our online help center is
accessible 24/7.
Visit our online help
center at: ring.com/help
Contact Ring Community
Support directly at:
1-800-656-1918
[e-mail]
33

Step 1
Download the Ring app
The Ring app will walk you through the
setup and installation processes.
The app is available for iOS, Android,
Mac Desktop, and Windows 10.
Search for “Ring” in one of the app
stores above, or visit: ring.com/app
Download from
Windows Store
We have an online guide with videos
and tutorials at: ring.com/setup
44

4 Faceplates
Pick the one that
best matches your
home…or your mood.
Change it any time.
Step 2
Say “Hello” to your Ring Video Doorbell Pro
Terminals
(attach your
existing wiring
here)
Back
Front
Setup
button
Mounting
holes
4 54 5

Step 2
Say “Hello” to your Ring Video Doorbell Pro
Step 3
Check out all the cool stuff in the box
1 Screwdriver - Use the Phillips end for the mounting
screws and star-shaped end for the security screw.
3 Anchors - For installing on concrete, stucco, or brick.
1 Drill Bit - To drill holes for the (optional) anchors.
3 Mounting Screws - Use two to mount your Ring.
2 Security Screws - Use one to secure the faceplate.
2 Extra Wires - To attach your existing wires to your Ring.
2 Wire connectors - To connect the extra wires
(above) to your existing wires.
1 Pro Power Kit - Install the Pro Power Kit after installing
your Ring Doorbell. Refer to the Pro Power Kit manual. 66

Step 4
Remove your existing
doorbell
Shut off power at the breaker.
Then remove your existing
doorbell from the wall and
disconnect the wires.
Installing Anchors (optional)
77

Installing Anchors (optional)
Step 5
Install anchors
(on stucco, brick,
or concrete)
On stucco, brick, or
concrete, use the provided
bit to drill two holes in your
wall, and install the anchors.
If you’re installing on wood
or siding, put the anchors
in that drawer of stuff you
never use and skip this step.
88

Installing Anchors (optional)
Step 6
Remove the
Faceplate
Remove the faceplate on
your Ring Doorbell Pro to
access the mounting holes.
After your Ring Doorbell is installed,
remove the faceplate like this:
99

Step 7
Connect Ring Doorbell to your existing wires
It doesn’t matter which wire connects to which screw.
Then feed the wiring into your wall, and screw in your Ring.
Ring Doorbell Pro requires
voltage between 16 and 24 VAC
10

Step 8
Install the Pro Power Kit
Install the Pro Power Kit on your existing internal doorbell.
The instructions are provided in a separate manual.
Customer Support
11

Customer Support
For additional help, visit: ring.com/help
For immediate assistance,
we’re available 7 days a week at:
Domestic: 1-800-656-1918
International: [phone]
[e-mail]
Protect the device from direct sunlight. Install the device at dry locations and protect it against rain and humidity. The device may
not get contact to salt water or other conductive liquids. The device must be charged only within a building in a dry state.
Caution: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
© 2016 Bot Home Automation, Inc.
RING, ALWAYS HOME, and CHIME are trademarks of Bot Home Automation, Inc.
Last updated: 04/13/16
1523 26th St.
Santa Monica, CA 90404
Hereby, Bot Home Automation, declares that this consumer electronic is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at www.ring.com/DoC.pdf.
2520AF680L-A05 1212