ring Motion Sensor User manual

Motion Sensor
Smart Lighting

1. Set up your
Motion Sensor.
Download the Ring app.
The app walks you through setting up
and managing your Motion Sensor.
Search for “Ring” in one of these app
stores, or visit: ring.com/app
Set up your Ring Bridge.
The Bridge connects your Ring Smart
Lights to the Ring app and the rest of
your Ring devices.
To set up your Bridge, follow the
instructions in the Ring app or the
Bridge user manual.
Download from
Windows Store
32

Remove the
front cover.
Pull the tabs on the
sides outward until
you can remove
the front of your
Motion Sensor.
Insert the
batteries.
Insert three
AAA batteries
(not included),
matching the flat
ends with the
springs.
Set up your Motion Sensor
in the Ring app.
In the app, tap Set Up a Device.
When prompted, select Smart Lights
and follow the in-app instructions.
Once setup is complete, you can replace
the front of your Motion Sensor.
Smart Lights
Alarm
Doorbells
Security Cams
Chimes
54

Remove the
base.
Slide the base down
to remove it from
your Motion Sensor.
If installing on a
masonry surface,
use the base as a
template to mark
pilot holes. Drill the
holes and insert
the anchors.
Drive the screws.
Hold the base firmly against the surface
and drive the two mounting screws.
Then slide your
Motion Sensor back
onto its base until it
clicks into place.
Your Motion Sensor works
best when mounted 4-6
feet above the ground.
2. Install your
Motion Sensor.
Attach the Motion Sensor.
6

For additional help, visit: ring.com/help
Or give us a call…
US 1 800 656 1918
Canada 1 855 300 7289
Worldwide [phone]
For a list of all our customer support
numbers, visit: ring.com/callus
To review your warranty coverage, please visit www.ring.com/warranty.
Patents: www.ring.com/patents
© 2019 Ring LLC or its aliates.
RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its aliates.
Last updated: 01/04/19